#!/bin/sh # # Originally part of vpnc source code: # © 2005-2012 Maurice Massar, Jörg Mayer, Antonio Borneo et al. # © 2009-2012 David Woodhouse # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA # ################ # # List of parameters passed through environment #* reason -- why this script was called, one of: pre-init connect disconnect reconnect #* VPNGATEWAY -- vpn gateway address (always present) #* TUNDEV -- tunnel device (always present) #* INTERNAL_IP4_ADDRESS -- address (always present) #* INTERNAL_IP4_MTU -- mtu (often unset) #* INTERNAL_IP4_NETMASK -- netmask (often unset) #* INTERNAL_IP4_NETMASKLEN -- netmask length (often unset) #* INTERNAL_IP4_NETADDR -- address of network (only present if netmask is set) #* INTERNAL_IP4_DNS -- list of dns servers #* INTERNAL_IP4_NBNS -- list of wins servers #* INTERNAL_IP6_ADDRESS -- IPv6 address #* INTERNAL_IP6_NETMASK -- IPv6 netmask #* INTERNAL_IP6_DNS -- IPv6 list of dns servers #* CISCO_DEF_DOMAIN -- default domain name #* CISCO_BANNER -- banner from server #* CISCO_SPLIT_INC -- number of networks in split-network-list #* CISCO_SPLIT_INC_%d_ADDR -- network address #* CISCO_SPLIT_INC_%d_MASK -- subnet mask (for example: 255.255.255.0) #* CISCO_SPLIT_INC_%d_MASKLEN -- subnet masklen (for example: 24) #* CISCO_SPLIT_INC_%d_PROTOCOL -- protocol (often just 0) #* CISCO_SPLIT_INC_%d_SPORT -- source port (often just 0) #* CISCO_SPLIT_INC_%d_DPORT -- destination port (often just 0) #* CISCO_IPV6_SPLIT_INC -- number of networks in IPv6 split-network-list #* CISCO_IPV6_SPLIT_INC_%d_ADDR -- IPv6 network address #* CISCO_IPV6_SPLIT_INC_$%d_MASKLEN -- IPv6 subnet masklen # FIXMEs: # Section A: route handling # 1) The 3 values CISCO_SPLIT_INC_%d_PROTOCOL/SPORT/DPORT are currently being ignored # In order to use them, we'll probably need os specific solutions # * Linux: iptables -t mangle -I PREROUTING -j ROUTE --oif $TUNDEV # This would be an *alternative* to changing the routes (and thus 2) and 3) # shouldn't be relevant at all) # 2) There are two different functions to set routes: generic routes and the # default route. Why isn't the defaultroute handled via the generic route case? # 3) In the split tunnel case, all routes but the default route might get replaced # without getting restored later. We should explicitely check and save them just # like the defaultroute # 4) Replies to a dhcp-server should never be sent into the tunnel # Section B: Split DNS handling # 1) Maybe dnsmasq can do something like that # 2) Parse dns packets going out via tunnel and redirect them to original dns-server #env | sort #set -x # =========== script (variable) setup ==================================== PATH=/sbin:/usr/sbin:$PATH OS="`uname -s`" HOOKS_DIR=/etc/vpnc DEFAULT_ROUTE_FILE=/var/run/vpnc/defaultroute RESOLV_CONF_BACKUP=/var/run/vpnc/resolv.conf-backup SCRIPTNAME=`basename $0` # some systems, eg. Darwin & FreeBSD, prune /var/run on boot if [ ! -d "/var/run/vpnc" ]; then mkdir -p /var/run/vpnc [ -x /sbin/restorecon ] && /sbin/restorecon /var/run/vpnc fi # stupid SunOS: no blubber in /usr/local/bin ... (on stdout) IPROUTE="`which ip 2> /dev/null | grep '^/'`" if ifconfig --help 2>&1 | grep BusyBox > /dev/null; then ifconfig_syntax_inet="" else ifconfig_syntax_inet="inet" fi if [ "$OS" = "Linux" ]; then ifconfig_syntax_ptp="pointopoint" route_syntax_gw="gw" route_syntax_del="del" route_syntax_netmask="netmask" else ifconfig_syntax_ptp="" route_syntax_gw="" route_syntax_del="delete" route_syntax_netmask="-netmask" fi if [ "$OS" = "SunOS" ]; then route_syntax_interface="-interface" ifconfig_syntax_ptpv6="$INTERNAL_IP6_ADDRESS" else route_syntax_interface="" ifconfig_syntax_ptpv6="" fi if [ -r /etc/openwrt_release ] && [ -n "$OPENWRT_INTERFACE" ]; then . /etc/functions.sh include /lib/network MODIFYRESOLVCONF=modify_resolvconf_openwrt RESTORERESOLVCONF=restore_resolvconf_openwrt elif [ -x /usr/bin/busctl ]; then # For systemd-resolved (version 229 and above) MODIFYRESOLVCONF=modify_resolved_manager RESTORERESOLVCONF=restore_resolved_manager elif [ -x /sbin/resolvconf ]; then # Optional tool on Debian, Ubuntu, Gentoo and FreeBSD MODIFYRESOLVCONF=modify_resolvconf_manager RESTORERESOLVCONF=restore_resolvconf_manager elif [ -x /sbin/netconfig ]; then # tool on Suse after 11.1 MODIFYRESOLVCONF=modify_resolvconf_suse_netconfig RESTORERESOLVCONF=restore_resolvconf_suse_netconfig elif [ -x /sbin/modify_resolvconf ]; then # Mandatory tool on Suse earlier than 11.1 MODIFYRESOLVCONF=modify_resolvconf_suse RESTORERESOLVCONF=restore_resolvconf_suse elif [ -x /usr/sbin/unbound-control ] && /usr/sbin/unbound-control status > /dev/null 2>&1; then MODIFYRESOLVCONF=modify_resolvconf_unbound RESTORERESOLVCONF=restore_resolvconf_unbound else # Generic for any OS MODIFYRESOLVCONF=modify_resolvconf_generic RESTORERESOLVCONF=restore_resolvconf_generic fi # =========== script hooks ================================================= run_hooks() { HOOK="$1" if [ -d ${HOOKS_DIR}/${HOOK}.d ]; then for script in ${HOOKS_DIR}/${HOOK}.d/* ; do [ -f $script ] && . $script done fi } # =========== tunnel interface handling ==================================== do_ifconfig() { if [ -n "$INTERNAL_IP4_MTU" ]; then MTU=$INTERNAL_IP4_MTU elif [ -n "$IPROUTE" ]; then MTUDEV=`$IPROUTE route get "$VPNGATEWAY" | sed -ne 's/^.*dev \([a-z0-9]*\).*$/\1/p'` MTU=`$IPROUTE link show "$MTUDEV" | sed -ne 's/^.*mtu \([[:digit:]]\+\).*$/\1/p'` if [ -n "$MTU" ]; then MTU=`expr $MTU - 88` fi fi if [ -z "$MTU" ]; then MTU=1412 fi # Point to point interface require a netmask of 255.255.255.255 on some systems if [ -n "$IPROUTE" ]; then $IPROUTE link set dev "$TUNDEV" up mtu "$MTU" $IPROUTE addr add "$INTERNAL_IP4_ADDRESS/32" peer "$INTERNAL_IP4_ADDRESS" dev "$TUNDEV" else ifconfig "$TUNDEV" ${ifconfig_syntax_inet} "$INTERNAL_IP4_ADDRESS" $ifconfig_syntax_ptp "$INTERNAL_IP4_ADDRESS" netmask 255.255.255.255 mtu ${MTU} up fi if [ -n "$INTERNAL_IP4_NETMASK" ]; then set_network_route $INTERNAL_IP4_NETADDR $INTERNAL_IP4_NETMASK $INTERNAL_IP4_NETMASKLEN fi # If the netmask is provided, it contains the address _and_ netmask if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128" fi if [ -n "$INTERNAL_IP6_NETMASK" ]; then if [ -n "$IPROUTE" ]; then $IPROUTE -6 addr add $INTERNAL_IP6_NETMASK dev $TUNDEV else # Unlike for Legacy IP, we don't specify the dest_address # here on *BSD. OpenBSD for one will refuse to accept # incoming packets to that address if we do. # OpenVPN does the same (gives dest_address for Legacy IP # but not for IPv6). # Only Solaris needs it; hence $ifconfig_syntax_ptpv6 ifconfig "$TUNDEV" inet6 $INTERNAL_IP6_NETMASK $ifconfig_syntax_ptpv6 mtu $MTU up fi fi } destroy_tun_device() { case "$OS" in NetBSD|OpenBSD) # and probably others... ifconfig "$TUNDEV" destroy ;; FreeBSD) ifconfig "$TUNDEV" destroy > /dev/null 2>&1 & ;; esac } # =========== route handling ==================================== if [ -n "$IPROUTE" ]; then fix_ip_get_output () { sed -e 's/ /\n/g' | \ sed -ne '1p;/via/{N;p};/dev/{N;p};/src/{N;p};/mtu/{N;p}' } set_vpngateway_route() { $IPROUTE route add `$IPROUTE route get "$VPNGATEWAY" | fix_ip_get_output` $IPROUTE route flush cache } del_vpngateway_route() { $IPROUTE route $route_syntax_del "$VPNGATEWAY" $IPROUTE route flush cache } set_default_route() { $IPROUTE route | grep '^default' | fix_ip_get_output > "$DEFAULT_ROUTE_FILE" $IPROUTE route replace default dev "$TUNDEV" $IPROUTE route flush cache } set_network_route() { NETWORK="$1" NETMASK="$2" NETMASKLEN="$3" $IPROUTE route replace "$NETWORK/$NETMASKLEN" dev "$TUNDEV" $IPROUTE route flush cache } reset_default_route() { if [ -s "$DEFAULT_ROUTE_FILE" ]; then $IPROUTE route replace `cat "$DEFAULT_ROUTE_FILE"` $IPROUTE route flush cache rm -f -- "$DEFAULT_ROUTE_FILE" fi } del_network_route() { NETWORK="$1" NETMASK="$2" NETMASKLEN="$3" $IPROUTE route $route_syntax_del "$NETWORK/$NETMASKLEN" dev "$TUNDEV" $IPROUTE route flush cache } set_ipv6_default_route() { # We don't save/restore IPv6 default route; just add a higher-priority one. $IPROUTE -6 route add default dev "$TUNDEV" metric 1 $IPROUTE -6 route flush cache } set_ipv6_network_route() { NETWORK="$1" NETMASKLEN="$2" $IPROUTE -6 route replace "$NETWORK/$NETMASKLEN" dev "$TUNDEV" $IPROUTE route flush cache } reset_ipv6_default_route() { $IPROUTE -6 route del default dev "$TUNDEV" $IPROUTE route flush cache } del_ipv6_network_route() { NETWORK="$1" NETMASKLEN="$2" $IPROUTE -6 route del "$NETWORK/$NETMASKLEN" dev "$TUNDEV" $IPROUTE -6 route flush cache } else # use route command get_default_gw() { # isn't -n supposed to give --numeric output? # apperently not... # Get rid of lines containing IPv6 addresses (':') netstat -r -n | awk '/:/ { next; } /^(default|0\.0\.0\.0)/ { print $2; }' } set_vpngateway_route() { route add -host "$VPNGATEWAY" $route_syntax_gw "`get_default_gw`" } del_vpngateway_route() { route $route_syntax_del -host "$VPNGATEWAY" $route_syntax_gw "`get_default_gw`" } set_default_route() { DEFAULTGW="`get_default_gw`" echo "$DEFAULTGW" > "$DEFAULT_ROUTE_FILE" route $route_syntax_del default $route_syntax_gw "$DEFAULTGW" route add default $route_syntax_gw "$INTERNAL_IP4_ADDRESS" $route_syntax_interface } set_network_route() { NETWORK="$1" NETMASK="$2" NETMASKLEN="$3" del_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN" route add -net "$NETWORK" $route_syntax_netmask "$NETMASK" $route_syntax_gw "$INTERNAL_IP4_ADDRESS" $route_syntax_interface } reset_default_route() { if [ -s "$DEFAULT_ROUTE_FILE" ]; then route $route_syntax_del default $route_syntax_gw "`get_default_gw`" $route_syntax_interface route add default $route_syntax_gw `cat "$DEFAULT_ROUTE_FILE"` rm -f -- "$DEFAULT_ROUTE_FILE" fi } del_network_route() { case "$OS" in Linux|NetBSD|OpenBSD|Darwin|SunOS) # and probably others... # routes are deleted automatically on device shutdown return ;; esac NETWORK="$1" NETMASK="$2" NETMASKLEN="$3" route $route_syntax_del -net "$NETWORK" $route_syntax_netmask "$NETMASK" $route_syntax_gw "$INTERNAL_IP4_ADDRESS" } set_ipv6_default_route() { route add -inet6 default "$INTERNAL_IP6_ADDRESS" $route_syntax_interface } set_ipv6_network_route() { NETWORK="$1" NETMASK="$2" route add -inet6 -net "$NETWORK/$NETMASK" "$INTERNAL_IP6_ADDRESS" $route_syntax_interface : } reset_ipv6_default_route() { route $route_syntax_del -inet6 default "$INTERNAL_IP6_ADDRESS" : } del_ipv6_network_route() { NETWORK="$1" NETMASK="$2" route $route_syntax_del -inet6 "$NETWORK/$NETMASK" "$INTERNAL_IP6_ADDRESS" : } fi # =========== resolv.conf handling ==================================== # =========== resolv.conf handling for any OS ========================= modify_resolvconf_generic() { grep '^#@VPNC_GENERATED@' /etc/resolv.conf > /dev/null 2>&1 || cp -- /etc/resolv.conf "$RESOLV_CONF_BACKUP" NEW_RESOLVCONF="#@VPNC_GENERATED@ -- this file is generated by vpnc # and will be overwritten by vpnc # as long as the above mark is intact" DOMAINS="$CISCO_DEF_DOMAIN" exec 6< "$RESOLV_CONF_BACKUP" while read LINE <&6 ; do case "$LINE" in # omit; we will overwrite these nameserver*) ;; # extract listed domains and prepend to list domain* | search*) DOMAINS="${LINE#* } $DOMAINS" ;; # retain other lines *) NEW_RESOLVCONF="$NEW_RESOLVCONF $LINE" ;; esac done exec 6<&- for i in $INTERNAL_IP4_DNS ; do NEW_RESOLVCONF="$NEW_RESOLVCONF nameserver $i" done # note that "search" is mutually exclusive with "domain"; # "search" allows multiple domains to be listed, so use that if [ -n "$DOMAINS" ]; then NEW_RESOLVCONF="$NEW_RESOLVCONF search $DOMAINS" fi echo "$NEW_RESOLVCONF" > /etc/resolv.conf if [ "$OS" = "Darwin" ]; then case "`uname -r`" in # Skip for pre-10.4 systems 4.*|5.*|6.*|7.*) ;; # 10.4 and later require use of scutil for DNS to work properly *) OVERRIDE_PRIMARY="" if [ -n "$CISCO_SPLIT_INC" ]; then if [ $CISCO_SPLIT_INC -lt 1 ]; then # Must override for correct default route # Cannot use multiple DNS matching in this case OVERRIDE_PRIMARY='d.add OverridePrimary # 1' fi # Overriding the default gateway breaks split routing OVERRIDE_GATEWAY="" # Not overriding the default gateway breaks usage of # INTERNAL_IP4_DNS. Prepend INTERNAL_IP4_DNS to list # of used DNS servers SERVICE=`echo "show State:/Network/Global/IPv4" | scutil | grep -oE '[a-fA-F0-9]{8}-([a-fA-F0-9]{4}-){3}[a-fA-F0-9]{12}'` SERVICE_DNS=`echo "show State:/Network/Service/$SERVICE/DNS" | scutil | grep -oE '([0-9]{1,3}[\.]){3}[0-9]{1,3}' | xargs` if [ X"$SERVICE_DNS" != X"$INTERNAL_IP4_DNS" ]; then scutil >/dev/null 2>&1 <<-EOF open get State:/Network/Service/$SERVICE/DNS d.add ServerAddresses * $INTERNAL_IP4_DNS $SERVICE_DNS set State:/Network/Service/$SERVICE/DNS close EOF fi else # No split routing. Override default gateway OVERRIDE_GATEWAY="d.add Router $INTERNAL_IP4_ADDRESS" fi # Uncomment the following if/fi pair to use multiple # DNS matching when available. When multiple DNS matching # is present, anything reading the /etc/resolv.conf file # directly will probably not work as intended. #if [ -z "$CISCO_DEF_DOMAIN" ]; then # Cannot use multiple DNS matching without a domain OVERRIDE_PRIMARY='d.add OverridePrimary # 1' #fi scutil >/dev/null 2>&1 <<-EOF open d.init d.add ServerAddresses * $INTERNAL_IP4_DNS set State:/Network/Service/$TUNDEV/DNS d.init $OVERRIDE_GATEWAY d.add Addresses * $INTERNAL_IP4_ADDRESS d.add SubnetMasks * 255.255.255.255 d.add InterfaceName $TUNDEV $OVERRIDE_PRIMARY set State:/Network/Service/$TUNDEV/IPv4 close EOF if [ -n "$CISCO_DEF_DOMAIN" ]; then scutil >/dev/null 2>&1 <<-EOF open get State:/Network/Service/$TUNDEV/DNS d.add DomainName $CISCO_DEF_DOMAIN d.add SearchDomains * $CISCO_DEF_DOMAIN d.add SupplementalMatchDomains * $CISCO_DEF_DOMAIN set State:/Network/Service/$TUNDEV/DNS close EOF fi ;; esac fi } restore_resolvconf_generic() { if [ ! -f "$RESOLV_CONF_BACKUP" ]; then return fi grep '^#@VPNC_GENERATED@' /etc/resolv.conf > /dev/null 2>&1 && cat "$RESOLV_CONF_BACKUP" > /etc/resolv.conf rm -f -- "$RESOLV_CONF_BACKUP" if [ "$OS" = "Darwin" ]; then case "`uname -r`" in # Skip for pre-10.4 systems 4.*|5.*|6.*|7.*) ;; # 10.4 and later require use of scutil for DNS to work properly *) scutil >/dev/null 2>&1 <<-EOF open remove State:/Network/Service/$TUNDEV/IPv4 remove State:/Network/Service/$TUNDEV/DNS close EOF # Split routing required prepending of INTERNAL_IP4_DNS # to list of used DNS servers if [ -n "$CISCO_SPLIT_INC" ]; then SERVICE=`echo "show State:/Network/Global/IPv4" | scutil | grep -oE '[a-fA-F0-9]{8}-([a-fA-F0-9]{4}-){3}[a-fA-F0-9]{12}'` SERVICE_DNS=`echo "show State:/Network/Service/$SERVICE/DNS" | scutil | grep -oE '([0-9]{1,3}[\.]){3}[0-9]{1,3}' | xargs` if [ X"$SERVICE_DNS" != X"$INTERNAL_IP4_DNS" ]; then scutil >/dev/null 2>&1 <<-EOF open get State:/Network/Service/$SERVICE/DNS d.add ServerAddresses * ${SERVICE_DNS##$INTERNAL_IP4_DNS} set State:/Network/Service/$SERVICE/DNS close EOF fi fi ;; esac fi } # === resolv.conf handling via /sbin/netconfig (Suse 11.1) ===================== # Suse provides a script that modifies resolv.conf. Use it because it will # restart/reload all other services that care about it (e.g. lwresd). [unclear if this is still true, but probably --mlk] modify_resolvconf_suse_netconfig() { /sbin/netconfig modify -s vpnc -i "$TUNDEV" <<-EOF INTERFACE='$TUNDEV' DNSSERVERS='$INTERNAL_IP4_DNS' DNSDOMAIN='$CISCO_DEF_DOMAIN' EOF } # Restore resolv.conf to old contents on Suse restore_resolvconf_suse_netconfig() { /sbin/netconfig remove -s vpnc -i "$TUNDEV" } # === resolv.conf handling via /sbin/modify_resolvconf (Suse) ===================== # Suse provides a script that modifies resolv.conf. Use it because it will # restart/reload all other services that care about it (e.g. lwresd). modify_resolvconf_suse() { FULL_SCRIPTNAME=`readlink -f $0` RESOLV_OPTS='' test -n "$INTERNAL_IP4_DNS" && RESOLV_OPTS="-n \"$INTERNAL_IP4_DNS\"" test -n "$CISCO_DEF_DOMAIN" && RESOLV_OPTS="$RESOLV_OPTS -d $CISCO_DEF_DOMAIN" test -n "$RESOLV_OPTS" && eval /sbin/modify_resolvconf modify -s vpnc -p $SCRIPTNAME -f $FULL_SCRIPTNAME -e $TUNDEV $RESOLV_OPTS -t \"This file was created by $SCRIPTNAME\" } # Restore resolv.conf to old contents on Suse restore_resolvconf_suse() { FULL_SCRIPTNAME=`readlink -f $0` /sbin/modify_resolvconf restore -s vpnc -p $SCRIPTNAME -f $FULL_SCRIPTNAME -e $TUNDEV } # === resolv.conf handling via UCI (OpenWRT) ========= modify_resolvconf_openwrt() { add_dns $OPENWRT_INTERFACE $INTERNAL_IP4_DNS } restore_resolvconf_openwrt() { remove_dns $OPENWRT_INTERFACE } # === resolv.conf handling via /sbin/resolvconf (Debian, Ubuntu, Gentoo)) ========= modify_resolvconf_manager() { NEW_RESOLVCONF="" for i in $INTERNAL_IP4_DNS; do NEW_RESOLVCONF="$NEW_RESOLVCONF nameserver $i" done if [ -n "$CISCO_DEF_DOMAIN" ]; then NEW_RESOLVCONF="$NEW_RESOLVCONF domain $CISCO_DEF_DOMAIN" fi echo "$NEW_RESOLVCONF" | /sbin/resolvconf -a $TUNDEV } restore_resolvconf_manager() { /sbin/resolvconf -d $TUNDEV } AF_INET=2 get_if_index() { local link link="$(ip link show dev "$1")" || return $? echo ${link} | awk -F: '{print $1}' } busctl_call() { local dest node dest=org.freedesktop.resolve1 node=/org/freedesktop/resolve1 busctl call "$dest" "${node}" "${dest}.Manager" "$@" } busctl_set_nameservers() { local if_index addresses args addr if_index=$1 shift addresses="$@" args="$if_index $#" for addr in ${addresses}; do args="$args ${AF_INET} 4 $(echo $addr | sed 's/[.]/ /g')" done busctl_call SetLinkDNS 'ia(iay)' ${args} } busctl_set_search() { local if_index domains args domain if_index=$1 shift domains="$@" args="$if_index $#" for domain in ${domains}; do args="$args ${domain} false" done busctl_call SetLinkDomains 'ia(sb)' ${args} } modify_resolved_manager() { local if_index if_index=$(get_if_index $TUNDEV) busctl_set_nameservers $if_index $INTERNAL_IP4_DNS if [ -n "$CISCO_DEF_DOMAIN" ]; then busctl_set_search $if_index $CISCO_DEF_DOMAIN fi } restore_resolved_manager() { local if_index if_index=$(get_if_index $TUNDEV) busctl_call RevertLink 'i' $if_index } # === resolv.conf handling via unbound ========= modify_resolvconf_unbound() { if [ -n "$CISCO_DEF_DOMAIN" ]; then /usr/sbin/unbound-control forward_add +i ${CISCO_DEF_DOMAIN} ${INTERNAL_IP4_DNS} /usr/sbin/unbound-control flush_requestlist /usr/sbin/unbound-control flush_zone ${CISCO_DEF_DOMAIN} fi } restore_resolvconf_unbound() { if [ -n "$CISCO_DEF_DOMAIN" ]; then /usr/sbin/unbound-control forward_remove +i ${CISCO_DEF_DOMAIN} /usr/sbin/unbound-control flush_zone ${CISCO_DEF_DOMAIN} /usr/sbin/unbound-control flush_requestlist fi } # ========= Toplevel state handling ======================================= kernel_is_2_6_or_above() { case `uname -r` in 1.*|2.[012345]*) return 1 ;; *) return 0 ;; esac } do_pre_init() { if [ "$OS" = "Linux" ]; then if (exec 6< /dev/net/tun) > /dev/null 2>&1 ; then : else # can't open /dev/net/tun test -e /proc/sys/kernel/modprobe && `cat /proc/sys/kernel/modprobe` tun 2>/dev/null # fix for broken devfs in kernel 2.6.x if [ "`readlink /dev/net/tun`" = misc/net/tun \ -a ! -e /dev/net/misc/net/tun -a -e /dev/misc/net/tun ] ; then ln -sf /dev/misc/net/tun /dev/net/tun fi # make sure tun device exists if [ ! -e /dev/net/tun ]; then mkdir -p /dev/net mknod -m 0640 /dev/net/tun c 10 200 [ -x /sbin/restorecon ] && /sbin/restorecon /dev/net/tun fi # workaround for a possible latency caused by udev, sleep max. 10s if kernel_is_2_6_or_above ; then for x in `seq 100` ; do (exec 6<> /dev/net/tun) > /dev/null 2>&1 && break; sleep 0.1 done fi fi elif [ "$OS" = "FreeBSD" ]; then if ! kldstat -q -m if_tun > /dev/null; then kldload if_tun fi if ! ifconfig $TUNDEV > /dev/null; then ifconfig $TUNDEV create fi elif [ "$OS" = "GNU/kFreeBSD" ]; then if [ ! -e /dev/tun ]; then kldload if_tun fi elif [ "$OS" = "NetBSD" ]; then : elif [ "$OS" = "OpenBSD" ]; then if ! ifconfig $TUNDEV > /dev/null; then ifconfig $TUNDEV create fi : elif [ "$OS" = "SunOS" ]; then : elif [ "$OS" = "Darwin" ]; then : fi } do_connect() { if [ -n "$CISCO_BANNER" ]; then echo "Connect Banner:" echo "$CISCO_BANNER" | while read LINE ; do echo "|" "$LINE" ; done echo fi set_vpngateway_route do_ifconfig if [ -n "$CISCO_SPLIT_INC" ]; then i=0 while [ $i -lt $CISCO_SPLIT_INC ] ; do eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}" eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}" eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}" if [ "$NETWORK" != "0.0.0.0" ]; then set_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN" else set_default_route fi i=`expr $i + 1` done for i in $INTERNAL_IP4_DNS ; do echo "$i" | grep : >/dev/null || \ set_network_route "$i" "255.255.255.255" "32" done elif [ -n "$INTERNAL_IP4_ADDRESS" ]; then set_default_route fi if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then i=0 while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do eval NETWORK="\${CISCO_IPV6_SPLIT_INC_${i}_ADDR}" eval NETMASKLEN="\${CISCO_IPV6_SPLIT_INC_${i}_MASKLEN}" if [ $NETMASKLEN -lt 128 ]; then set_ipv6_network_route "$NETWORK" "$NETMASKLEN" else set_ipv6_default_route fi i=`expr $i + 1` done for i in $INTERNAL_IP4_DNS ; do if echo "$i" | grep : >/dev/null; then set_ipv6_network_route "$i" "128" fi done elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then set_ipv6_default_route fi if [ -n "$INTERNAL_IP4_DNS" ]; then $MODIFYRESOLVCONF fi } do_disconnect() { if [ -n "$CISCO_SPLIT_INC" ]; then i=0 while [ $i -lt $CISCO_SPLIT_INC ] ; do eval NETWORK="\${CISCO_SPLIT_INC_${i}_ADDR}" eval NETMASK="\${CISCO_SPLIT_INC_${i}_MASK}" eval NETMASKLEN="\${CISCO_SPLIT_INC_${i}_MASKLEN}" if [ "$NETWORK" != "0.0.0.0" ]; then # FIXME: This doesn't restore previously overwritten # routes. del_network_route "$NETWORK" "$NETMASK" "$NETMASKLEN" else reset_default_route fi i=`expr $i + 1` done for i in $INTERNAL_IP4_DNS ; do del_network_route "$i" "255.255.255.255" "32" done else reset_default_route fi if [ -n "$CISCO_IPV6_SPLIT_INC" ]; then i=0 while [ $i -lt $CISCO_IPV6_SPLIT_INC ] ; do eval NETWORK="\${CISCO_IPV6_SPLIT_INC_${i}_ADDR}" eval NETMASKLEN="\${CISCO_IPV6_SPLIT_INC_${i}_MASKLEN}" if [ $NETMASKLEN -eq 0 ]; then reset_ipv6_default_route else del_ipv6_network_route "$NETWORK" "$NETMASKLEN" fi i=`expr $i + 1` done for i in $INTERNAL_IP6_DNS ; do del_ipv6_network_route "$i" "128" done elif [ -n "$INTERNAL_IP6_NETMASK" -o -n "$INTERNAL_IP6_ADDRESS" ]; then reset_ipv6_default_route fi del_vpngateway_route if [ -n "$INTERNAL_IP4_DNS" ]; then $RESTORERESOLVCONF fi if [ -n "$IPROUTE" ]; then if [ -n "$INTERNAL_IP4_ADDRESS" ]; then $IPROUTE addr del "$INTERNAL_IP4_ADDRESS/255.255.255.255" peer "$INTERNAL_IP4_ADDRESS" dev "$TUNDEV" fi # If the netmask is provided, it contains the address _and_ netmask if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128" fi if [ -n "$INTERNAL_IP6_NETMASK" ]; then $IPROUTE -6 addr del $INTERNAL_IP6_NETMASK dev $TUNDEV fi else if [ -n "$INTERNAL_IP4_ADDRESS" ]; then ifconfig "$TUNDEV" 0.0.0.0 fi if [ -n "$INTERNAL_IP6_ADDRESS" ] && [ -z "$INTERNAL_IP6_NETMASK" ]; then INTERNAL_IP6_NETMASK="$INTERNAL_IP6_ADDRESS/128" fi if [ -n "$INTERNAL_IP6_NETMASK" ]; then ifconfig "$TUNDEV" inet6 del $INTERNAL_IP6_NETMASK fi fi destroy_tun_device } #### Main if [ -z "$reason" ]; then echo "this script must be called from vpnc" 1>&2 exit 1 fi case "$reason" in pre-init) run_hooks pre-init do_pre_init ;; connect) run_hooks connect do_connect run_hooks post-connect ;; disconnect) run_hooks disconnect do_disconnect run_hooks post-disconnect ;; reconnect) run_hooks reconnect ;; *) echo "unknown reason '$reason'. Maybe vpnc-script is out of date" 1>&2 exit 1 ;; esac exit 0