Next: Gnuplot Options, Previous: Functions and Variables for Plotting, Up: Plotting [Contents][Index]
All options consist of a list starting with one of the keywords in this section, followed by one or more values. Some of the options may have different effects in different plotting commands as it will be pointed out in the following list. The options that accept among their possible values true or false, can also be set to true by simply writing their names. For instance, typing logx as an option is equivalent to writing [logx, true].
Default value: 5
The maximum number of splittings used by the adaptive plotting routine.
Categories: Plotting
Default value: true
Where symbol can be either true
, false
, x
,
y
or solid
. If false
, no axes are shown; if equal
to x
or y
only the x or y axis will be shown; if it is
equal to true
, both axes will be shown and solid
will show
the two axes with a solid line, rather than the default broken
line. This option does not have any effect in the 3 dimensional plots.
Categories: Plotting
Default value: 30
A plot3d plot can be thought of as starting with the x and y axis in the
horizontal and vertical axis, as in plot2d, and the z axis coming out of
the screen. The z axis is then rotated around the x axis through an
angle equal to elevation
and then the new xy plane is rotated
around the new z axis through an angle azimuth
. This option sets
the value for the azimuth, in degrees.
See also elevation
.
Categories: Plotting
Default value: true
If set to true
, a bounding box will be drawn for the plot; if set
to false
, no box will be drawn.
Categories: Plotting
In 2d plots it defines the color (or colors) for the various curves. In
plot3d
, it defines the colors used for the mesh lines of the
surfaces, when no palette is being used.
If there are more curves or surfaces than colors, the colors will be
repeated in sequence. The valid colors are red
, green
,
blue
, magenta
, cyan
, yellow
, orange
,
violet
, brown
, gray
, black
, white
, or
a string starting with the character # and followed by six hexadecimal
digits: two for the red component, two for green component and two for
the blue component. If the name of a given color is unknown color, black
will be used instead.
Categories: Plotting
Default value: false
in plot3d, true
in mandelbrot and julia
Where symbol can be either true
or false
. If
true
, whenever plot3d
, mandelbrot
or
julia
use a palette to represent different values, a box will be
shown on the right, showing the corresponding between colors and values.
Categories: Plotting
Defines the values at which a mark and a number will be placed in the color bar. The first number is the initial value, the second the increments and the third is the last value where a mark is placed. The second and third numbers can be omitted. When only one number is given, it will be used as the increment from an initial value that will be chosen automatically.
Categories: Plotting
Default value: 60
A plot3d plot can be thought of as starting with the x and y axis in the
horizontal and vertical axis, as in plot2d, and the z axis coming out of
the screen. The z axis is then rotated around the x axis through an
angle equal to elevation
and then the new xy plane is rotated
around the new z axis through an angle azimuth
. This option sets
the value for the elevation, in degrees.
See also azimuth
.
Categories: Plotting
Default value: 30
, 30
Sets the number of grid points to use in the x- and y-directions for
three-dimensional plotting or for the julia
and mandelbrot
programs.
For a way to actually draw a grid See grid2d
.
Categories: Plotting
Default value: false
Shows a grid of lines on the xy plane. The points where the grid lines
are placed are the same points where tics are marked in the x and y
axes, which can be controlled with the xtics
and ytics
options.
See also grid
.
Categories: Plotting
Default value: 9
Number of iterations made by the programs mandelbrot and julia.
Categories: Plotting
Writes one or several labels in the points with x, y coordinates indicated after each label.
Categories: Plotting
It specifies the labels for the plots when various plots are shown. If
there are more plots than the number of labels given, they will be
repeated. If given the value false
, no legends will be shown. By
default, the names of the expressions or functions will be used, or the
words discrete1, discrete2, …, for discrete sets of points.
Categories: Plotting
Makes the horizontal axes to be scaled logarithmically. It can be either true or false.
Categories: Plotting
Makes the vertical axes to be scaled logarithmically. It can be either true or false.
Categories: Plotting
Default value: black
It sets the color used by plot3d to draw the mesh lines, when a palette is
being used. It accepts the same colors as for the option color
(see the list of allowed colors in color
). It can also be given a
value false
to eliminate completely the mesh lines.
Categories: Plotting
Default value: 29
When plotting functions with plot2d
, it is gives the initial
number of points used by the adaptive plotting routine for plotting
functions. When plotting parametric functions with plot3d
,
it sets the number of points that will be shown for the plot.
Categories: Plotting
It can consist of one palette or a list of several palettes. Each palette is a list with a keyword followed by values. If the keyword is gradient, it should be followed by a list of valid colors.
If the keyword is hue, saturation or value, it must be followed by 4 numbers. The first three numbers, which must be between 0 and 1, define the hue, saturation and value of a basic color to be assigned to the minimum value of z. The keyword specifies which of the three attributes (hue, saturation or value) will be increased according to the values of z. The last number indicates the increase corresponding to the maximum value of z. That last number can be bigger than 1 or negative; the corresponding values of the modified attribute will be rounded modulo 1.
Gnuplot only uses the first palette in the list; xmaxima will use the palettes in the list sequentially, when several surfaces are plotted together; if the number of palettes is exhausted, they will be repeated sequentially.
The color of the mesh lines will be given by the option
mesh_lines_color
. If palette
is given the value
false
, the surfaces will not be shaded but represented with a
mesh of curves only. In that case, the colors of the lines will be
determined by the option color
.
Categories: Plotting
Default value: gnuplot
, in Windows systems, or gnuplot_pipes
in
other systems.
Where format is one of the following: gnuplot, xmaxima, mgnuplot, gnuplot_pipes or geomview.
It sets the format to be used for plotting.
Categories: Plotting
Default value: false
If set to true
, the functions to be plotted will be considered
as complex functions whose real value should be plotted; this is
equivalent to plotting realpart(function)
. If set to
false
, nothing will be plotted when the function does not give a
real value. For instance, when x
is negative, log(x)
gives
a complex value, with real value equal to log(abs(x))
; if
plot_realpart
were true
, log(-5)
would be plotted
as log(5)
, while nothing would be plotted if
plot_realpart
were false
.
Categories: Plotting
In gnuplot, each set of points to be plotted with the style “points”
or “linespoints” will be represented with objects taken from this
list, in sequential order. If there are more sets of points than objects
in this list, they will be repeated sequentially.
The possible objects that can be used are: bullet
, circle
,
plus
, times
, asterisk
, box
, square
,
triangle
, delta
, wedge
, nabla
, diamond
,
lozenge
.
Categories: Plotting
Saves the plot into a PDF file with name equal to file_name,
rather than showing it in the screen. By default, the file will be
created in the directory defined by the variable
maxima_tempdir
, unless file_name contains the character
“/”, in which case it will be assumed to contain the complete path where
the file should be created. The value of maxima_tempdir
can be changed
to save the file in a different directory. When the option
gnuplot_pdf_term_command
is also given, it will be used to set up
Gnuplot’s PDF terminal; otherwise, Gnuplot’s pdfcairo terminal
will be used with solid colored lines of width 3, plot
size of 17.2 cm by 12.9 cm and font of 18 points.
Categories: Plotting
Saves the plot into a PNG graphics file with name equal to file_name,
rather than showing it in the screen. By default, the file will be
created in the directory defined by the variable
maxima_tempdir
, unless file_name contains the character
“/”, in which case it will be assumed to contain the complete path where
the file should be created. The value of maxima_tempdir
can be changed
to save the file in a different directory. When the option
gnuplot_png_term_command
is also given, it will be used to set up
Gnuplot’s PNG terminal; otherwise, Gnuplot’s pngcairo terminal
will be used, with a font of size 12.
Categories: Plotting
Saves the plot into a Postscript file with name equal to file_name,
rather than showing it in the screen. By default, the file will be
created in the directory defined by the variable
maxima_tempdir
, unless file_name contains the character
“/”, in which case it will be assumed to contain the complete path where
the file should be created. The value of maxima_tempdir
can be changed
to save the file in a different directory. When the option
gnuplot_ps_term_command
is also given, it will be used to set up
Gnuplot’s Postscript terminal; otherwise, Gnuplot’s postscript terminal
will be used with the EPS option, solid colored lines of width 2, plot
size of 16.4 cm by 12.3 cm and font of 24 points.
Categories: Plotting
This option is only used when the plot format is gnuplot
and the
terminal is default
or when the Gnuplot terminal is set to
dumb
(see gnuplot_term
) and can have a true or false
value.
If the terminal is default
, a file maxout_xxx.gnuplot
(or
other name specified with gnuplot_out_file
) is created with the
gnuplot commands necessary to generate the plot. Option run_viewer
controls whether or not Gnuplot will be launched to execute those
commands and show the plot.
If the terminal is default
, gnuplot is run to execute the
commands in maxout_xxx.gnuplot
, producing another file
maxplot.txt
(or other name specified with
gnuplot_out_file
). Option run_viewer
controls whether or
not that file, with an ASCII representation of the plot, will be shown
in the Maxima or Xmaxima console.
The default value for this option is true, making the plots to be shown in either the console or a separate graphics window.
Categories: Plotting
It can be either true or false. If true, the scales used in the x and y
axes will be the same, in either 2d or 3d plots. See also yx_ratio
.
Categories: Plotting
It can be either true or false. If true, the scales used in the 3 axes of a 3d plot will be the same.
Categories: Plotting
The styles that will be used for the various functions or sets of data in a 2d plot. The word style must be followed by one or more styles. If there are more functions and data sets than the styles given, the styles will be repeated. Each style can be either lines for line segments, points for isolated points, linespoints for segments and points, or dots for small isolated dots. Gnuplot accepts also an impulses style.
Each of the styles can be enclosed inside a list with some additional parameters. lines accepts one or two numbers: the width of the line and an integer that identifies a color. The default color codes are: 1: blue, 2: red, 3: magenta, 4: orange, 5: brown, 6: lime and 7: aqua. If you use Gnuplot with a terminal different than X11, those colors might be different; for example, if you use the option [gnuplot_term, ps], color index 4 will correspond to black, instead of orange.
points accepts one two or three parameters; the first parameter is the radius of the points, the second parameter is an integer that selects the color, using the same code used for lines and the third parameter is currently used only by Gnuplot and it corresponds to several objects instead of points. The default types of objects are: 1: filled circles, 2: open circles, 3: plus signs, 4: x, 5: *, 6: filled squares, 7: open squares, 8: filled triangles, 9: open triangles, 10: filled inverted triangles, 11: open inverted triangles, 12: filled lozenges and 13: open lozenges.
linespoints accepts up to four parameters: line width, points radius, color and type of object to replace the points.
See also color
and point_type
.
Categories: Plotting
Saves the plot into an SVG file with name equal to file_name,
rather than showing it in the screen. By default, the file will be
created in the directory defined by the variable
maxima_tempdir
, unless file_name contains the character
“/”, in which case it will be assumed to contain the complete path where
the file should be created. The value of maxima_tempdir
can be changed
to save the file in a different directory. When the option
gnuplot_svg_term_command
is also given, it will be used to set up
Gnuplot’s SVG terminal; otherwise, Gnuplot’s svg terminal
will be used with font of 14 points.
Categories: Plotting
Defines a title that will be written at the top of the plot.
Categories: Plotting
Where symbol is either false
or the result obtained by
using the function transform_xy
. If different from false
,
it will be used to transform the 3 coordinates in plot3d.
See make_transform
, polar_to_xy
and
spherical_to_xyz
.
Categories: Plotting
When used as the first option in a plot2d
command (or any of the
first two in plot3d
), it indicates that the first independent variable
is x and it sets its range. It can also be used again after the first
option (or after the second option in plot3d) to define the effective
horizontal domain that will be shown in the plot.
Categories: Plotting
Specifies the string that will label the first axis; if this option is
not used, that label will be the name of the independent variable, when plotting
functions with plot2d
or implicit_plot
, or the name of the
first variable, when plotting surfaces with plot3d
or contours with
contour_plot
, or the first expression in the case of a parametric
plot. It can not be used with set_plot_option
.
Categories: Plotting
Defines the values at which a mark and a number will be placed in the x axis. The first number is the initial value, the second the increments and the third is the last value where a mark is placed. The second and third numbers can be omitted. When only one number is given, it will be used as the increment from an initial value that will be chosen automatically.
Categories: Plotting
In a 2d plot, it defines the ratio of the total size of the Window to the size that will be used for the plot. The two numbers given as arguments are the scale factors for the x and y axes.
This option does not change the size of the graphic window or the placement
of the graph in the window. If you want to change the aspect ratio of the
plot, it is better to use option yx_ratio
. For instance,
[yx_ratio, 10]
instead of [xy_scale, 0.1, 1]
.
Categories: Plotting
When used as one of the first two options in plot3d
, it indicates
that one of the independent variables is y and it sets its range. Otherwise,
it defines the effective domain of the second variable that will be
shown in the plot.
Categories: Plotting
Specifies the string that will label the second axis; if this
option is not used, that label will be “y”, when plotting functions
with plot2d
or implicit_plot
, or the name of the second
variable, when plotting surfaces with plot3d
or contours with
contour_plot
, or the second expression in the case of a parametric
plot. It can not be used with set_plot_option
.
Categories: Plotting
Defines the values at which a mark and a number will be placed in the y axis. The first number is the initial value, the second the increments and the third is the last value where a mark is placed. The second and third numbers can be omitted. When only one number is given, it will be used as the increment from an initial value that will be chosen automatically
Categories: Plotting
In a 2d plot, the ratio between the vertical and the horizontal sides of
the rectangle used to make the plot. See also same_xy
.
Categories: Plotting
Used in plot3d
to set the effective range of values of z that will be
shown in the plot.
Categories: Plotting
Specifies the string that will label the third axis, when using
plot3d
. If this option is not used, that label will be “z”, when
plotting surfaces, or the third expression in the case of a parametric
plot. It can not be used with set_plot_option
and it will be
ignored by plot2d
and implicit_plot
.
Categories: Plotting
Next: Gnuplot Options, Previous: Functions and Variables for Plotting, Up: Plotting [Contents][Index]