Post-installation steps for Slackware ------------------------------------- 1. Enable the TLP services TLP and the TLP Profiles Daemon are independent services. Enable their scripts with: # chmod +x /etc/rc.d/rc.tlp # chmod +x /etc/rc.d/rc.tlp-pd Then add the following to /etc/rc.d/rc.local: if [ -x /etc/rc.d/rc.tlp ]; then /etc/rc.d/rc.tlp start fi if [ -x /etc/rc.d/rc.tlp-pd ]; then /etc/rc.d/rc.tlp-pd start fi You may start them immediately with: # /etc/rc.d/rc.tlp start # /etc/rc.d/rc.tlp-pd start 2. Configuration System configuration is read from: /etc/tlp.conf /etc/tlp.d/*.conf A template is installed as /etc/tlp.conf.new for administrator review. For TLP 1.11 and newer, profile-specific settings use these suffixes: _PRF performance profile _BAL balanced profile _SAV power-saver profile The older `_AC` and `_BAT` names continue to work through runtime translation. Use `tlp-stat --cdiff` to locate settings that should be updated. 3. TLP Profiles Daemon This package includes the TLP Profiles Daemon and its command-line client. The daemon provides the power-profiles daemon interface without requiring power-profiles-daemon or systemd. The daemon requires the Slackware packages python3, pygobject3, polkit, and dbus. The activation procedure is described in section 1. The available profiles can then be inspected or changed with: $ tlpctl list $ tlpctl balanced The `tlp-pd` daemon must be running for `tlpctl` to work. 4. Radio Device Wizard The Radio Device Wizard (`tlp-rdw`) requires NetworkManager and can enable or disable radio devices when network connections change. Ensure that `/etc/rc.d/rc.networkmanager` is enabled when using this feature. It has no separate service; NetworkManager runs its dispatcher hook. Configure it in `/etc/tlp.conf` using settings such as: DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan" DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan" DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan" Use the following commands to check or change the Radio Device Wizard state: $ tlp-rdw # tlp-rdw enable # tlp-rdw disable 5. Notes for upgrades If existing `/etc/tlp.conf`, `/etc/rc.d/rc.tlp`, or `/etc/rc.d/rc.tlp-pd` files are present, new versions will be installed as `.new` files. Review and merge changes as needed. Files in `/etc/tlp.d/` are administrator-managed drop-ins and are not overwritten.