<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="en_GB" sourcelanguage="en_US">
<context>
    <name>ClamAV</name>
    <message>
        <source>Be verbose.</source>
        <translation></translation>
    </message>
    <message>
        <source>Show filenames inside scanned archives.</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable libclamav&apos;s debug messages.</source>
        <translation></translation>
    </message>
    <message>
        <source>Only output error messages.</source>
        <translation></translation>
    </message>
    <message>
        <source>Write to stdout instead of stderr. Does not affect &apos;debug&apos; messages.</source>
        <translation></translation>
    </message>
    <message>
        <source>Disable summary at end of scanning.</source>
        <translation></translation>
    </message>
    <message>
        <source>Only print infected files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Skip printing OK files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Sound bell on virus detection.</source>
        <translation></translation>
    </message>
    <message>
        <source>Do not remove temporary files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Create temporary files for nested file scans that would otherwise be in-memory only.</source>
        <translation></translation>
    </message>
    <message>
        <source>Generate JSON metadata for the scanned file(s). For testing &amp; development use ONLY. JSON will be printed if --debug is enabled. A JSON file will dropped to the temp directory if --leave-temps is enabled.</source>
        <translation></translation>
    </message>
    <message>
        <source>Store html URIs in metadata. URIs will be written to the metadata.json file in an array called &apos;URIs&apos;.</source>
        <translation></translation>
    </message>
    <message>
        <source>Store pdf URIs in metadata. URIs will be written to the metadata.json file in an array called &apos;URIs&apos;.</source>
        <translation></translation>
    </message>
    <message>
        <source>Store md5 and sha1 in addition to sha2-256 in metadata.</source>
        <translation></translation>
    </message>
    <message>
        <source>Only load official signatures.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan subdirectories recursively.</source>
        <translation></translation>
    </message>
    <message>
        <source>Continue scanning within file after finding a match.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan files and directories on other filesystems.</source>
        <translation></translation>
    </message>
    <message>
        <source>Remove infected files. Be careful!</source>
        <translation></translation>
    </message>
    <message>
        <source>Load unsigned bytecode. **Caution**: You should NEVER run bytecode signatures from untrusted sources. Doing so may result in arbitrary code execution.</source>
        <translation></translation>
    </message>
    <message>
        <source>Detect Possibly Unwanted Applications.</source>
        <translation></translation>
    </message>
    <message>
        <source>Detect structured data (SSN, Credit Card).</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan mail files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable email signature-based phishing detection.</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable URL signature-based phishing detection.</source>
        <translation></translation>
    </message>
    <message>
        <source>Heuristic alerts.</source>
        <translation></translation>
    </message>
    <message>
        <source>Stop scanning as soon as a heuristic match is found.</source>
        <translation></translation>
    </message>
    <message>
        <source>Normalize html, script, and text files. Use normalize=no for yara compatibility.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan PE files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan ELF files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan OLE2 containers.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan PDF files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan SWF files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan HTML files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan xml-based document files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan HWP3 files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan OneNote files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan archive files (supported by libclamav).</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan image (graphics) files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Detect files by calculating image (graphics) fuzzy hashes.</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on broken graphics files (JPEG, TIFF, PNG, GIF).</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on encrypted archives and documents.</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on encrypted archives.</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on OLE2 files containing VBA macros.</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on files that exceed max file size, max scan size, or max recursion limit.</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on emails containing SSL mismatches in URLs.</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on emails containing cloaked URLs.</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on raw DMG image files containing partition intersections.</source>
        <translation></translation>
    </message>
    <message>
        <source>Disable authenticode certificate chain verification in PE files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Dump authenticode certificate chain in PE files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Disable caching and cache checks for hash sums of scanned files.</source>
        <translation></translation>
    </message>
    <message>
        <source>Print the file hash after each file scanned. The type of hash printed will match the '--hash-alg'.</source>
        <translation></translation>
    </message>
    <message>
        <source>Print the file type after each file scanned.</source>
        <translation></translation>
    </message>
    <message>
        <source>Enforce FIPS-like limits on using hash algorithms for cryptographic purposes. Will disable MD5 &amp; SHA1. FP sigs and will require &apos;.sign&apos; files to verify CVD authenticity.</source>
        <translation></translation>
    </message>
    <message>
        <source>By default the log file is locked for writing and only a single daemon process can write to it. This option disables the lock. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Maximum size of the log file. Value of 0 disables the limit. Default: 1048576</source>
        <translation></translation>
    </message>
    <message>
        <source>Log time for each message. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Log all clean files. Useful in debugging but drastically increases the log size. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Use the system logger (can work together with LogFile). Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Type of syslog messages Please refer to &apos;man syslog&apos; for facility names. Default: LOG_LOCAL6</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable verbose logging. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Rotate log file. Requires LogFileMaxSize option set prior to this option. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Log additional information about the infected file, such as its size and hash, together with the virus name. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>This option allows you to change the default temporary directory. Default: system specific (usually /tmp or /var/tmp).</source>
        <translation></translation>
    </message>
    <message>
        <source>This option allows you to change the default database directory. If you enable it, please make sure it points to the same direc‐ tory in both clamd and freshclam. Default: defined at configuration (/usr/local/share/clamav)</source>
        <translation></translation>
    </message>
    <message>
        <source>Path to a directory containing ClamAV CA certificate files used to verify signed database archives (e.g. CVD files). This direc‐ tory must already exist, be an absolute path, be readable by freshclam, clamd, clamscan, and sigtool. Default: /etc/certs</source>
        <translation></translation>
    </message>
    <message>
        <source>Enforce FIPS-like limits on using hash algorithms for crypto‐ graphic purposes. Will disable MD5 &amp; SHA1 FP sigs and will re‐ quire &apos;.sign&apos; files to verify CVD authenticity. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Only load the official signatures published by the ClamAV project. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Return with a nonzero error code if the virus database is older than the specified number of days. Default: -1</source>
        <translation></translation>
    </message>
    <message>
        <source>Remove stale socket after unclean shutdown. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>TCP port number the daemon will listen on. Default: disabled</source>
        <translation></translation>
    </message>
    <message>
        <source>By default clamd binds to INADDR_ANY. This option allows you to restrict the TCP address and provide some degree of protection from the outside world. This option can be specified multiple times in order to listen on multiple IPs. IPv6 is now supported. Default: disabled</source>
        <translation></translation>
    </message>
    <message>
        <source>Maximum length the queue of pending connections may grow to. Default: 200</source>
        <translation></translation>
    </message>
    <message>
        <source>Close the STREAM session when the data size limit is exceeded. The value should match your MTA&apos;s limit for the maximum attach‐ ment size. Default: 100M</source>
        <translation></translation>
    </message>
    <message>
        <source>The STREAM command uses an FTP-like protocol. This option sets the lower boundary for the port range. Default: 1024</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the upper boundary for the port range. Default: 2048</source>
        <translation></translation>
    </message>
    <message>
        <source>Maximum number of threads running at the same time. Default: 10</source>
        <translation></translation>
    </message>
    <message>
        <source>This option specifies the time (in seconds) after which clamd should timeout if a client doesn&apos;t provide any data. Default: 120</source>
        <translation></translation>
    </message>
    <message>
        <source>This option specifies the time (in seconds) after which clamd should timeout if a client doesn&apos;t provide any initial command after connecting. The default is set to 30 to avoid timeouts with TCP sockets when processing large messages. If using a Unix socket, the value can be changed to 5. Note: the timeout for subsequents commands, and/or data chunks is specified by Read‐ Timeout. Default: 30</source>
        <translation></translation>
    </message>
    <message>
        <source>This option specifies how long to wait (in milliseconds) if the send buffer is full. Keep this value low to prevent clamd hang‐ ing. Default: 500</source>
        <translation></translation>
    </message>
    <message>
        <source>Maximum number of queued items (including those being processed by MaxThreads threads). It is recommended to have this value at least twice MaxThreads if possible. WARNING: you shouldn&apos;t increase this too much to avoid running out of file descriptors, the following condition should hold: MaxThreads*MaxRecursion + MaxQueue - MaxThreads + 6 &lt; RLIMIT_NOFILE. RLIMIT_NOFILE is the maximum number of open file descriptors (usually 1024), set by ulimit -n. Default: 100</source>
        <translation></translation>
    </message>
    <message>
        <source>This option specifies how long (in seconds) the process should wait for a new job. Default: 30</source>
        <translation></translation>
    </message>
    <message>
        <source>Maximum depth directories are scanned at. Default: 15</source>
        <translation></translation>
    </message>
    <message>
        <source>Follow directory symlinks. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan files and directories on other filesystems. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Follow regular file symlinks. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>This option specifies the time intervals (in seconds) in which clamd should perform a database check. Default: 600</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable non-blocking (multi-threaded/concurrent) database reloads. This feature will temporarily load a second scanning engine while scanning continues using the first engine. Once loaded, the new engine takes over. The old engine is removed as soon as all scans using the old engine have completed. This feature requires more RAM, so this option is provided in case users are willing to block scans during reload in exchange for lower RAM requirements. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Execute a command when virus is found. Use the following envi‐ ronment variables to identify the file and virus names: - $CLAM_VIRUSEVENT_FILENAME - $CLAM_VIRUSEVENT_VIRUSNAME In the command string, &apos;%v&apos; will also be replaced with the virus name. Note: The &apos;%f&apos; filename format character has been disabled and will no longer be replaced with the file name, due to command in‐ jection security concerns. Use the &apos;CLAM_VIRUSEVENT_FILENAME&apos; environment variable instead. For the same reason, you should NOT use the environment variables in the command directly, but should use it carefully from your executed script. Default: disabled</source>
        <translation></translation>
    </message>
    <message>
        <source>Stop daemon when libclamav reports out of memory condition. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Permit use of the ALLMATCHSCAN command. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Don&apos;t fork into background. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable debug messages from libclamav. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Do not remove temporary files (for debugging purpose). Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Record metadata about the file being scanned. Scan metadata is useful for file analysis purposes and for debugging scan behav‐ ior. The JSON metadata will be printed after the scan is com‐ plete if Debug is enabled. A metadata.json file will be written to the scan temp directory if LeaveTemporaryFiles is enabled. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Store URIs found in html files to the json metadata. URIs will be stored in an array with the tag &apos;URIs&apos;. GenerateMetadataJson is required for this feature. Default: yes (if GenerateMetadataJson is used)</source>
        <translation></translation>
    </message>
    <message>
        <source>Store URIs found in pdf files to the json metadata. URIs will be stored in an array with the tag &apos;URIs&apos;. GenerateMetadataJson is required for this feature. Default: yes (if GenerateMetadataJson is used)</source>
        <translation></translation>
    </message>
    <message>
        <source>Calculate MD5 and SHA1 hashes (in addition to SHA2-256) and store to the json metadata. GenerateMetadataJson is required for this feature. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Run the daemon as a specified user (the process must be started by root). Default: disabled</source>
        <translation></translation>
    </message>
    <message>
        <source>With this option enabled ClamAV will load bytecode from the data‐ base. It is highly recommended you keep this option turned on, otherwise you may miss detections for many new viruses. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Set bytecode security level. Possible values: TrustSigned - trust bytecode loaded from signed .c[lv]d files and insert runtime safety checks for bytecode loaded from other sources, Paranoid - don&apos;t trust any bytecode, insert runtime checks for all. Recommended: TrustSigned, because bytecode in .cvd files already has these checks. Default: TrustSigned</source>
        <translation></translation>
    </message>
    <message>
        <source>Set bytecode timeout in milliseconds. Default: 10000</source>
        <translation></translation>
    </message>
    <message>
        <source>Allow loading bytecode from outside digitally signed .c[lv]d files. **Caution**: You should NEVER run bytecode signatures from untrusted sources. Doing so may result in arbitrary code execution. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Set bytecode execution mode. Possible values: Auto - automatically choose JIT if possible, fallback to in‐ terpreter ForceJIT - always choose JIT, fail if not possible ForceInterpreter - always choose interpreter Test - run with both JIT and interpreter and compare results. Make all failures fatal. Default: Auto</source>
        <translation></translation>
    </message>
    <message>
        <source>Detect Possibly Unwanted Applications. Default: No</source>
        <translation></translation>
    </message>
    <message>
        <source>In some cases (eg. complex malware, exploits in graphic files, and others), ClamAV uses special algorithms to provide accurate detection. This option controls the algorithmic detection. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Allow heuristic match to take precedence. When enabled, if a heuristic scan (such as phishingScan) detects a possible virus/phishing it will stop scanning immediately. Recommended, saves CPU scan-time. When disabled, virus/phishing detected by heuristic scans will be reported only at the end of a scan. If an archive contains both a heuristically detected virus/phishing, and a real malware, the real malware will be reported. Keep this disabled if you intend to handle &quot;*.Heuristics.*&quot; viruses dif‐ ferently from &quot;real&quot; malware. If a non-heuristically-detected virus (signature-based) is found first, the scan is interrupted immediately, regardless of this config option. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>PE stands for Portable Executable - it&apos;s an executable file for‐ mat used in all 32 and 64-bit versions of Windows operating sys‐ tems. This option allows ClamAV to perform a deeper analysis of executable files and it&apos;s also required for decompression of pop‐ ular executable packers such as UPX. If you turn off this option, the original files will still be scanned, but without additional processing. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Executable and Linking Format is a standard format for UN*X exe‐ cutables. This option allows you to control the scanning of ELF files. If you turn off this option, the original files will still be scanned, but without additional processing. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable scanning of mail files. If you turn off this option, the original files will still be scanned, but without parsing individual messages/attachments. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan RFC1341 messages split over many emails. You will need to periodically clean up $TemporaryDirectory/clamav-partial direc‐ tory. WARNING: This option may open your system to a DoS attack. Never use it on loaded servers. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable email signature-based phishing detection. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable URL signature-based phishing detection (Heuristics.Phish‐ ing.Email.*) Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable the DLP module. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the lowest number of Credit Card numbers found in a file to generate a detect. Default: 3</source>
        <translation></translation>
    </message>
    <message>
        <source>With this option enabled the DLP module will search for valid Credit Card0umbers only. Debit and Private Label cards will not be searched. Default: No</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the lowest number of Social Security Numbers found in a file to generate a detect. Default: 3</source>
        <translation></translation>
    </message>
    <message>
        <source>With this option enabled the DLP module will search for valid SSNs formatted as xxx-yy-zzzz. Default: Yes</source>
        <translation></translation>
    </message>
    <message>
        <source>With this option enabled the DLP module will search for valid SSNs formatted as xxxyyzzzz. Default: No</source>
        <translation></translation>
    </message>
    <message>
        <source>Perform HTML/JavaScript/ScriptEncoder normalisation and decryp‐ tion. If you turn off this option, the original files will still be scanned, but without additional processing. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>This option enables scanning of OLE2 files, such as Microsoft Of‐ fice documents and .msi files. If you turn off this option, the original files will still be scanned, but without additional processing. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>This option enables scanning within PDF files. If you turn off this option, the original files will still be scanned, but without additional processing. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>This option enables scanning within SWF files. If you turn off this option, the original files will still be scanned, but without decoding and additional processing. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>This option enables scanning xml-based document files supported by libclamav. If you turn off this option, the original files will still be scanned, but without additional processing. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>This option enables scanning HWP3 files. If you turn off this option, the original files will still be scanned, but without additional processing. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>This option enables scanning OneNote files. If you turn off this option, the original files will still be scanned, but without additional processing. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan within archives and compressed files. If you turn off this option, the original files will still be scanned, but without unpacking and additional processing. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>This option enables scanning of image (graphics). If you turn off this option, the original files will still be scanned, but without unpacking and additional processing. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>This option enables detection by calculating a fuzzy hash of im‐ age (graphics) files. Signatures using image fuzzy hashes typi‐ cally match files and documents by identifying images embedded or attached to those files. If you turn off this option, then some files may no longer be de‐ tected. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on broken executable files (PE &amp; ELF). Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on broken graphics files (JPEG, TIFF, PNG, GIF). Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on encrypted archives and documents (encrypted .zip, .7zip, .rar, .pdf). Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on encrypted archives (encrypted .zip, .7zip, .rar). Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on encrypted documents (encrypted .pdf). Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on OLE2 files containing VBA macros (Heuristics.OLE2.Con‐ tainsMacros). Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>When AlertExceedsMax is set, files exceeding the MaxFileSize, MaxScanSize, or MaxRecursion limit will be flagged with the virus name starting with &quot;Heuristics.Limits.Exceeded&quot;. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on emails containing SSL mismatches in URLs (might lead to false positives!). Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on emails containing cloaked URLs (might lead to some false positives). Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on raw DMG image files containing partition intersections. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>This option allows you to disable the caching feature of the en‐ gine. By default, the engine will store an MD5 in a cache of any files that are not flagged as virus or that hit limits checks. Warning: Disabling the cache will have a negative performance impact on large scans. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>This option allows you to set the number of entries the cache can store. The value should be a square number or will be rounded up to the nearest square number. Default: 65536</source>
        <translation></translation>
    </message>
    <message>
        <source>This option causes memory or nested map scans to dump the content to disk. If you turn on this option, more data is written to disk and is available when the leave-temps option is enabled at the cost of more disk writes. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum amount of time a scan may take to complete. The value is in milliseconds. The value of 0 disables the limit. WARNING: disabling this limit or setting it too high may result allow scanning of certain files to lock up the scan‐ ning process/threads resulting in a Denial of Service. Default: 120000</source>
        <translation></translation>
    </message>
    <message>
        <source>Sets the maximum amount of data to be scanned for each input file. Archives and other containers are recursively extracted and scanned up to this value. The size of an archive plus the sum of the sizes of all files within archive count toward the scan size. For example, a 1M uncompressed archive containing a single 1M in‐ ner file counts as 2M toward the max scan size. Warning: dis‐ abling this limit or setting it too high may result in severe damage to the system. Default: 400M</source>
        <translation></translation>
    </message>
    <message>
        <source>Files larger than this limit won&apos;t be scanned. Affects the input file itself as well as files contained inside it (when the input file is an archive, a document or some other kind of container). Warning: disabling this limit or setting it too high may result in severe damage to the system. Technical design limitations pre‐ vent ClamAV from scanning files greater than 2 GB at this time. Default: 100M</source>
        <translation></translation>
    </message>
    <message>
        <source>Nested archives are scanned recursively, e.g. if a Zip archive contains a RAR file, all files within it will also be scanned. This options specifies how deeply the process should be contin‐ ued. Warning: setting this limit too high may result in severe damage to the system. Default: 17</source>
        <translation></translation>
    </message>
    <message>
        <source>Number of files to be scanned within an archive, a document, or any other kind of container. Warning: disabling this limit or setting it too high may result in severe damage to the system. Default: 10000</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum size of a file to check for embedded PE. Files larger than this value will skip the additional analysis step. Negative values are not allowed. Default: 40M</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum size of a HTML file to normalize. HTML files larger than this value will not be normalized or scanned. Negative values are not allowed. Default: 40M</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum size of a normalized HTML file to scan. HTML files larger than this value after normalization will not be scanned. Negative values are not allowed. Default: 8M</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum size of a script file to normalize. Script content larger than this value will not be normalized or scanned. Negative values are not allowed. Default: 20M</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum size of a ZIP file to reanalyze type recognition. ZIP files larger than this value will skip the step to poten‐ tially reanalyze as PE. Negative values are not allowed. WARNING: setting this limit too high may result in severe damage or impact performance. Default: 1M</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum number of partitions of a raw disk image to be scanned. Raw disk images with more partitions than this value will have up to the value partitions scanned. Negative values are not allowed. WARNING: setting this limit too high may result in severe damage or impact performance. Default: 50</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum number of icons within a PE to be scanned. PE files with more icons than this value will have up to the value number icons scanned. Negative values are not allowed. WARNING: setting this limit too high may result in severe damage or impact performance. Default: 100</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum recursive calls to HWP3 parsing function. HWP3 files using more than this limit will be terminated and alert the user. Scans will be unable to scan any HWP3 attachments if the recur‐ sive limit is reached. Negative values are not allowed. WARNING: setting this limit too high may result in severe damage or impact performance. Default: 16</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum calls to the PCRE match function during an instance of regex matching. Instances using more than this limit will be terminated and alert the user but the scan will continue. For more information on match_limit, see the PCRE documentation. Negative values are not allowed. WARNING: setting this limit too high may severely impact perfor‐ mance. Default: 10000</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum recursive calls to the PCRE match function during an instance of regex matching. Instances using more than this limit will be terminated and alert the user but the scan will continue. For more information on match_limit_recursion, see the PCRE docu‐ mentation. Negative values are not allowed and values &gt; PCREMatchLimit are superfluous. WARNING: setting this limit too high may severely impact perfor‐ mance. Default: 2000</source>
        <translation></translation>
    </message>
    <message>
        <source>This option sets the maximum filesize for which PCRE subsigs will be executed. Files exceeding this limit will not have PCRE subsigs executed unless a subsig is encompassed to a smaller buffer. Negative values are not allowed. Setting this value to zero disables the limit. WARNING: setting this limit too high or disabling it may severely impact performance. Default: 100M</source>
        <translation></translation>
    </message>
    <message>
        <source>With this option you can exclude the root UID (0). Processes run under root will be able to access all files without triggering scans or permission denied events. Note that if clamd cannot check the uid of the process that gen‐ erated an on-access scan event (e.g., because OnAccessPrevention was not enabled, and the process already exited), clamd will per‐ form a scan. Thus, setting OnAccessExcludeRootUID is not guaran‐ teed to prevent every access by the root user from triggering a scan (unless OnAccessPrevention is enabled). Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Files larger than this value will not be scanned in on access. Default: 5M</source>
        <translation></translation>
    </message>
    <message>
        <source>Max number of scanning threads to allocate to the OnAccess thread pool at startup. These threads are the ones responsible for cre‐ ating a connection with the daemon and kicking off scanning after an event has been processed. To prevent clamonacc from consuming all clamd&apos;s resources keep this lower than clamd&apos;s max threads. Default: 5</source>
        <translation></translation>
    </message>
    <message>
        <source>Max amount of time (in milliseconds) that the OnAccess client should spend for every connect, send, and receive attempt when communicating with clamd via curl. Default: 5000 (5 seconds)</source>
        <translation></translation>
    </message>
    <message>
        <source>Specifies a mount point (including all files and directories un‐ der it), which should be scanned on access. This option can be used multiple times. Default: disabled</source>
        <translation></translation>
    </message>
    <message>
        <source>Disables the dynamic directory determination system which allows for recursively watching include paths. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Enables fanotify blocking when malicious files are found. Default: disabled</source>
        <translation></translation>
    </message>
    <message>
        <source>Number of times the OnAccess client will retry a failed scan due to connection problems (or other issues). Default: 0</source>
        <translation></translation>
    </message>
    <message>
        <source>When using prevention, if this option is turned on, any errors that occur during scanning will result in the event attempt be‐ ing denied. This could potentially lead to unwanted system behav‐ iour with certain configurations, so the client defaults this to off and prefers allowing access events in case of scan or connec‐ tion error. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Toggles extra scanning and notifications when a file or directory is created or moved. Requires the DDD system to kick-off extra scans. Default: no</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable libclamav&apos;s debug messages</source>
        <translation></translation>
    </message>
    <message>
        <source>Be verbose</source>
        <translation></translation>
    </message>
    <message>
        <source>Only print infected files</source>
        <translation></translation>
    </message>
    <message>
        <source>Sound bell on virus detection</source>
        <translation></translation>
    </message>
    <message>
        <source>Create temporary files for nested file scans that would otherwise be in-memory only</source>
        <translation></translation>
    </message>
    <message>
        <source>Continue scanning within file after finding a match</source>
        <translation></translation>
    </message>
    <message>
        <source>Show filenames inside scanned archives</source>
        <translation></translation>
    </message>
    <message>
        <source>Only output error messages</source>
        <translation></translation>
    </message>
    <message>
        <source>Disable summary at end of scanning</source>
        <translation></translation>
    </message>
    <message>
        <source>Skip printing OK files</source>
        <translation></translation>
    </message>
    <message>
        <source>Do not remove temporary files</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan subdirectories recursively</source>
        <translation></translation>
    </message>
    <message>
        <source>Detect Possibly Unwanted Applications</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan files and directories on other filesystems</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan mail files</source>
        <translation></translation>
    </message>
    <message>
        <source>Detect structured data (SSN, Credit Card)</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable URL signature-based phishing detection</source>
        <translation></translation>
    </message>
    <message>
        <source>Stop scanning as soon as a heuristic match is found</source>
        <translation></translation>
    </message>
    <message>
        <source>Enable email signature-based phishing detection</source>
        <translation></translation>
    </message>
    <message>
        <source>Heuristic alerts</source>
        <translation></translation>
    </message>
    <message>
        <source>Normalize html, script, and text files. Use normalize=no for yara compatibility</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan PE files</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan ELF files</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan OLE2 containers</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan PDF files</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan SWF files</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan HTML files</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan xml-based document files</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan HWP3 files</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan archive files (supported by libclamav)</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on broken executable files (PE &amp; ELF).</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan OneNote files</source>
        <translation></translation>
    </message>
    <message>
        <source>Scan image (graphics) files</source>
        <translation></translation>
    </message>
    <message>
        <source>Detect files by calculating image (graphics) fuzzy hashes</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on encrypted archives and documents</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on encrypted documents.</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on OLE2 files containing VBA macros</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on encrypted archives</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on files that exceed max file size, max scan size, or max recursion limit</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on emails containing cloaked URLs</source>
        <translation></translation>
    </message>
    <message>
        <source>Disable authenticode certificate chain verification in PE files</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on broken graphics files (JPEG, TIFF, PNG, GIF)</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on emails containing SSL mismatches in URLs</source>
        <translation></translation>
    </message>
    <message>
        <source>Alert on raw DMG image files containing partition intersections</source>
        <translation></translation>
    </message>
    <message>
        <source>Sets the group ownership on the unix socket. Default: the primary group of the user running clamd</source>
        <translation></translation>
    </message>
    <message>
        <source>Enables the SHUTDOWN command. Setting this to no prevents a client to stop clamd via the protocol. When disabled, clamd responds to this command with COMMAND UN‐ AVAILABLE. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Enables the RELOAD command. Setting this to no prevents a client to reload the database. When disabled, clamd responds to this command with COMMAND UN‐ AVAILABLE. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Enables the VERSION command. Setting this to no prevents a client from querying version information. When disabled, clamd responds to this command with COMMAND UN‐ AVAILABLE. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Enables the STATS command. Setting this to no prevents a client from querying statistics. When disabled, clamd responds to this command with COMMAND UN‐ AVAILABLE. Default: yes</source>
        <translation></translation>
    </message>
    <message>
        <source>Exclude a specific PUA category. This directive can be used mul‐ tiple times. See https://docs.clamav.net/faq/faq-pua.html for the complete list of PUA categories. Default: disabled</source>
        <translation></translation>
    </message>
    <message>
        <source>With this option you can exclude specific UIDs. Processes with these UIDs will be able to access all files without triggering scans or permission denied events. This option can be used multiple times (one per line). Note: using a value of 0 on any line will disable this option en‐ tirely. To exclude the root UID (0) please enable the OnAccessEx‐ cludeRootUID option. Also note that if clamd cannot check the uid of the process that generated an on-access scan event (e.g., because OnAccessPreven‐ tion was not enabled, and the process already exited), clamd will perform a scan. Thus, setting OnAccessExcludeUID is not guaran‐ teed to prevent every access by the specified uid from triggering a scan (unless OnAccessPrevention is enabled). Default: disabled</source>
        <translation></translation>
    </message>
    <message>
        <source>This option allows exclusions via user names when using the on- access scanning client. It can be used multiple times, and has the same potential race condition limitations of the OnAccessEx‐ cludeUID option. Default: disabled</source>
        <translation></translation>
    </message>
</context>
</TS>
