# $Id: config.site,v 1.14 2007/06/21 19:21:45 aidan Exp $ # # HylaFAX Facsimile Software # # Copyright (c) 1990-1996 Sam Leffler # Copyright (c) 1991-1996 Silicon Graphics, Inc. # HylaFAX is a trademark of Silicon Graphics, Inc. # # Permission to use, copy, modify, distribute, and sell this software and # its documentation for any purpose is hereby granted without fee, provided # that (i) the above copyright notices and this permission notice appear in # all copies of the software and related documentation, and (ii) the names of # Sam Leffler and Silicon Graphics may not be used in any advertising or # publicity relating to the software without the specific, prior written # permission of Sam Leffler and Silicon Graphics. # # THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, # EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY # WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. # # IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR # ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, # OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, # WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF # LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE # OF THIS SOFTWARE. # # # This file holds site-specific configuration parameters. # # Nothing is defined in here by default, the definitions # commented out below serve as documentation for what you # can set in this file or a config.local file. # # Note that you do not need to set anything here unless you # want to override the auto-configuration behaviour and/or # interactive prompting done by the configure script. # # # Package controls. # #DSO="auto" # configure DSO support (auto|IRIX|no) #GETTY="auto" # type of getty support (auto|BSD|SysV) #PS="auto" # PostScript support to use (auto|gs|dps|imp) #SGI2FAX="auto" # configure SGI image support (auto|yes|no) #DPS="no" # install SGI DPS-based RIP (yes|no) GS="yes" # install Ghostscript RIP (yes|no) #IMP="no" # install SGI Impressario 2.1 support (yes|no) #REGEX="yes" # use distributed regular expression package #UTMP="utmpx" # type of utmp+wtmp handling (auto|utmp|utmpx) #DBLIB="no" # use distributed libdb distribution # # Directory parameters. # DIR_BIN="/usr/bin" # directory for client apps DIR_LIB="/usr/lib" # directory for libfaxserver, libfaxutil DIR_LIBDATA="/usr/lib/hylafax" # directory for client data DIR_LIBEXEC="/usr/libexec/hylafax" # directory for libraries&hidden apps DIR_MAN="/usr/man" # directory for manual pages DIR_SPOOL="/var/spool/hylafax" # directory for spooling area DIR_SBIN="/usr/sbin" # directory for system apps #DIR_LOCKS="/usr/spool/locks" # directory for UUCP lock files #FONTMAP="/usr/share/ghostscript/3.33" # directorys containing Fontmap files #PATH_AFM="/usr/lib/DPS/AFM" # directorys for AFM files # # Miscellaneous parameters. # #DEFVRES="196" # default vertical res for outbound fax #FILLORDER="MS2LSB" # bit order of cpu (MSB2LSB/LSB2MSB) FAXGID="uucp" # group ID for fax user FAXUID="uucp" # user ID for fax user PAGESIZE="North American Letter" # default page size #SYSGID="sys" # group ID for system installs #SYSUID="bin" # user ID for system installs #LOCKS="ascii" # default UUCP lockfile scheme # #PATH_GETTY="/etc/getty" # pathname of suitable getty program #PATH_VGETTY="/bin/vgetty" # pathname of voice getty program #PATH_EGETTY="/bin/egetty" # pathname of external getty program #PATH_SENDMAIL="/usr/lib/sendmail" # pathname of suitable sendmail program PATH_GSRIP="/usr/bin/gs" # pathname of Ghostscript-based RIP #PATH_DPSRIP="/var/spool/hylafax/bin/ps2fax.exe" # pathname of DPS-based RIP #PATH_IMPRIP="/usr/lib/print/psrip" # pathname of Impressario 2.1 RIP #MANSCHEME="sysv-source-cat-strip" # manual page installation scheme SYSVINIT="auto" # install SysV-style init support (auto|yes|no) DIR_SYSVINIT="/etc/rc.d" # location of SysV-style init script DIR_SYSVINITSTART="/etc/rc.d" # location of SysV-style start script DIR_SYSVINITSTOP="/etc/rc.d" # location of SysV-style stop script NAME_SYSVINITSTART="rc.hylafax" # name of SysV-style start script NAME_SYSVINITSTOP="rc.hylafax" # name of SysV-style stop script FAXQ_SERVER=yes # init script starts faxq HFAXD_SERVER=yes # init script starts hfaxd HFAXD_OLD_PROTOCOL=no # don't start old protocol HFAXD_SNPP_SERVER=no # don't start paging protocol # SVR4 packaging stuff #PKG_ARCH= # ARCH variable in pkginfo file #PKG_EMAIL=someone@somehost.somedomain # EMAIL variable in pkginfo file #PKG_VENDOR="Your Name Here" # VENDOR variable in pkginfo file # # # Parameters used when building the software. # # Note that configure has several ENVOPTS built into it that are # set according to the target. This is done to help naive folks. # # Beware of changing the INSTALL definition; you *must* have an # install script that emulates the Silicon Graphics install program! # #AR="/bin/ar" # pathname of suitable ar program #AROPTS="rc" # options to ar for creating archive #CC="gcc" # name/pathname of C compiler #CXX="gcc" # name/pathname of C++ compiler #CXXFILE="-x c++" # options for proper C++ processing #ENVOPTS="-Aa" # options for getting ANSI C #GCOPTS="-g" # options to pass C compiler #GCXXOPTS="-g" # options to pass C++ compiler #GENDIST="/sbin/gendist" # pathname of SGI inst generator program #INSTALL='${SHELL} ${PORT}/install.sh' # SGI install program/emulator #LIBMALLOC="auto" # yes|no|auto configure -lmalloc use #LIBPORT='${PORT}/libport.a' # library with emulation code #LIBSUN="auto" # yes|no|auto configure -lsun use #LLDOPTS="" # extra link line options #MACHDEPLIBS="" # extra libraries for linking #OPTIMIZER="-O2 -march=i486 -mtune=i686" # optimizer flags #PORTFUNCS="" # non-standard functions to emulate #PROTOTYPES="-prototypes" # C compiler options for checking function prototypes #RANLIB=":" # pathname of suitable ranlib program #SHDLIBC="-lc_s" # shared C library, if not standard #SIGHANDLERTYPES='(void(*)(int,...))' # types to check for signal handler #STRIP="/bin/strip" # strip program used by install.sh GLDOPTS="-L/usr/lib" # # The source for the TIFF library is not required # to build this software, but the library is required # to link against. If libtiff is installed in a # non-standard location then setup LIBTIFF accordingly. # LIBTIFF="-L/usr/lib -ltiff" # linkage convention for libtiff TIFFINC="/usr/include" # place to find tiffio.h TIFFBIN="/usr/bin" # where TIFF tools live # # The source for the ZLIB library is not required # to build this software, but the library is required # to link against. If ZLIB is installed in a # non-standard location then setup LIBZ accordingly. # LIBZ="-L/usr/lib -lz" # linkage convention for libz ZLIBINC="-I/usr/include" # place to find zlib.h # # The source for the POSIX regular expression package # is not required to build this software, but the package # is required to link against. If the copy of the software # that is included in this distribution is not to be used # then set REGEX=no and supply the following definitions. # LIBREGEX=" " # linkage convention for regex package REGEXINC="/usr/include" # place to find regex.h # # The LIBDB hashed database package is (currently) used # only by the MLA tools that are not publicly available # but which are built from within this source tree. In # the future the fax software may use the libdb software # for the remote client capabilities database (so these # hooks are included now). # # The source for the LIBDB hashed database package # is not required to build this software, but the package # is required to link against. If the copy of the software # that is included in this distribution is not to be used # then set DBLIB=no and supply the following definitions. # LIBDB=" " # linkage convention for libdb package DBLIBINC="/usr/include" # place to find db.h # # Parameters to control various workarounds for system bugs. # # These parameters are normally set in configure based on # the target system. If they are set here, then they will # override anything done by configure. # #CONFIG_OPENFIFO="O_RDONLY" # mode to open FIFOs in server proc's #CONFIG_FIFOBUG="yes" # enable workaround for FIFO select bug #CONFIG_TIOCMBISBYREF="yes" # pass arg by reference to ioctl #CONFIG_WINSZHACK="no" # include extra files for TIOCWINSZ use #CONFIG_ABORTBUG="no" # enable workaround for abort problems #CONFIG_NOREOPEN="yes" # reopen tty device after toggling DTR #CONFIG_NOSTDINDUP="yes" # do not redirect stdout to stdin in ondelay #CONFIG_BADEXECVPROTO="no" # system has incorrect execv func decl #CONFIG_BADEXECVEPROTO="no" # system has incorrect execve func decl #CONFIG_BADGETOPTPROTO="no" # system has incorrect getopt func decl #CONFIG_SOCKARGLENTYPE="unsigned long" # call-by-ref arg type for socket funcs #CONFIG_BADSELECTPROTO="no" # system has way old select func decl #CONFIG_MAXGID="5999" # maximum permissable GID #CONFIG_OSFCNH="auto" # control inclusion of # # Dynamic Shared Object (DSO) support. # # Beware that adding new support for DSOs may require some # modifications to the */Makefile.dso files. # #DSOSUF="so" # DSO filename suffix #DSODELAY="-delay_load" # DSO option for delayed loading #DSOOPTS="-shared -rdata_shared" # options for building DSOs # # Makefile construction parameters. # # These should not normally be set; configure will # deduce the appropriate syntax to use for includes. # #MAKECXXOVERRIDE="=.C" # make override stuff for SunPRO C++ #MAKEDEPINCLUDE="include" # make include for dependency files #MAKEDSOINCLUDE="#" # make include for DSO support #MAKEINCLUDE=".include" # make include syntax #MAKELQUOTE="<" # make include syntax #MAKERQUOTE=">" # make include syntax #SETMAKE='MAKE = ${MAKE}' # define if make does not setup $MAKE #MKDEPCOPTS="" # C compiler opts to supply w/ -M #MKDEPCXXOPTS="" # C++ compiler opts to supply w/ -M # # General system stuff used by the distribution. # # Beware of setting these as configure selects several programs # based on whether or not they are capable of processing scripts # included in the distribution (e.g AWK and SCRIPT_SH, SED). # #AWK="/bin/awk" # pathname of suitable awk program #CAT="/bin/cat" # pathname of suitable cat program #CHGRP="/etc/chgrp" # pathname of suitable chgrp program #CHMOD="/etc/chmod" # pathname of suitable chmod program #CHOWN="/etc/chown" # pathname of suitable chown program #CMP="/bin/cmp" # pathname of suitable cmp program #COL="/bin/col" # pathname of suitable col program #CP="/bin/cp" # pathname of suitable cp program #ECHO="/bin/echo" # pathname of suitable echo program #GREP="/bin/grep" # pathname of suitable grep program #LN="/bin/ln" # pathname of suitable ln program #LN_S="-s" # option to ${LN} to create symlink #MAN="/usr/bin/man" # pathname of suitable man program MKDIR="/bin/mkdir -p" # pathname of suitable mkdir program #MKFIFO="/bin/mkfifo" # pathname of suitable mkfifo program #MV="/bin/mv" # pathname of suitable mv program #MV_F="-f" # option to ${MV} to force operation #RMCMD="/bin/rm" # pathname of suitable rm program #SED="/bin/sed" # pathname of suitable sed program #SCRIPT_SH="/bin/sh" # pathname of suitable shell #SORT="/bin/sort" # pathname of suitable sort program