# Example hostapd build time configuration # # This file lists the configuration options that are used when building the # hostapd binary. All lines starting with # are ignored. Configuration option # lines must be commented out complete, if they are not to be included, i.e., # just setting VARIABLE=n is not disabling that variable. # # This file is included in Makefile, so variables like CFLAGS and LIBS can also # be modified from here. In most cass, these lines should use += in order not # to override previous values of the variables. # Driver interface for Host AP driver CONFIG_DRIVER_HOSTAP=y # Driver interface for wired authenticator CONFIG_DRIVER_WIRED=y # Driver interface for madwifi driver #CONFIG_DRIVER_MADWIFI=y #CFLAGS += -I/tmp/SBo/madwifi-0.9.4/ # change to reflect local setup; directory for madwifi src # Driver interface for Prism54 driver CONFIG_DRIVER_PRISM54=y # IEEE 802.11F/IAPP CONFIG_IAPP=y # WPA2/IEEE 802.11i RSN pre-authentication CONFIG_RSN_PREAUTH=y # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) CONFIG_PEERKEY=y # IEEE 802.11w (management frame protection) # This version is an experimental implementation based on IEEE 802.11w/D1.0 # draft and is subject to change since the standard has not yet been finalized. # Driver support is also needed for IEEE 802.11w. CONFIG_IEEE80211W=y # Integrated EAP server CONFIG_EAP=y # EAP-MD5 for the integrated EAP server CONFIG_EAP_MD5=y # EAP-TLS for the integrated EAP server CONFIG_EAP_TLS=y # EAP-MSCHAPv2 for the integrated EAP server CONFIG_EAP_MSCHAPV2=y # EAP-PEAP for the integrated EAP server CONFIG_EAP_PEAP=y # EAP-GTC for the integrated EAP server CONFIG_EAP_GTC=y # EAP-TTLS for the integrated EAP server CONFIG_EAP_TTLS=y # EAP-SIM for the integrated EAP server CONFIG_EAP_SIM=y # EAP-AKA for the integrated EAP server CONFIG_EAP_AKA=y # EAP-PAX for the integrated EAP server CONFIG_EAP_PAX=y # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) CONFIG_EAP_PSK=y # EAP-SAKE for the integrated EAP server CONFIG_EAP_SAKE=y # EAP-GPSK for the integrated EAP server CONFIG_EAP_GPSK=y # Include support for optional SHA256 cipher suite in EAP-GPSK CONFIG_EAP_GPSK_SHA256=y # PKCS#12 (PFX) support (used to read private key and certificate file from # a file that usually has extension .p12 or .pfx) CONFIG_PKCS12=y # RADIUS authentication server. This provides access to the integrated EAP # server from external hosts using RADIUS. CONFIG_RADIUS_SERVER=y # Build IPv6 support for RADIUS operations CONFIG_IPV6=y