% \iffalse
%% File: longtable.dtx Copyright (C) 1990-1994 David Carlisle
%
%<package>\NeedsTeXFormat{LaTeX2e}
%<package>\ProvidesPackage{longtable}
%<package>         [1994/05/22 v3.11 Multi-page Table package (DPC)]
%
%<*driver>
\documentclass{ltxdoc}
\usepackage{longtable}
\GetFileInfo{longtable.sty}
\begin{document}
\title{The \textsf{longtable} package\thanks{This file
        has version number \fileversion, last
        revised \filedate.}}
\author{David Carlisle\\carlisle@cs.man.ac.uk}
\date{\filedate}
 \maketitle
 \DeleteShortVerb{\|}
 % \setlongtables
 \DocInput{longtable.dtx}
\end{document}
%</driver>

% \fi
%
% \begin{abstract}
%  This package defines the {\tt longtable} environment, a multi-page
%  version of {\tt tabular}.
% \end{abstract}
%
% \MakeShortVerb{\"}
%
% \changes{v1.00}{1990/12/20}
%    {Initial version}
%
% \changes{v2.00}{1991/06/17}
%    {Support NFSS and array.sty}
%
% \changes{v3.00}{1992/03/16}
%    {New implementation. tables may now start anywhere on the page.}
%
% \changes{v3.01}{1992/04/06}
%    {(Michel Goossens) If a chunk ends on a line in which the first
%     entry is empty, wierd errors occur. Added special begin and end
%     groups, (\cmd\ifnum0 ) stuff as  explained in Appendix D.}
%
% \changes{v3.02}{1992/04/09}
%    {(Michel Goossens) Longtable fails if the table counter is reset
%     during a document. Now use an internal counter, but still
%     increment table so \cmd\caption and \cmd\label work out right.}
%
% \changes{v3.03}{1992/06/25}
%    {Add \cmd{\@ifundefined{reset@font}} so that the documentation may
%     be processed with old versions of LaTeX.}
% \changes{v3.03}{1992/06/25}
%    {Modify the treatment of \cmd{\d@llar} to match the new versions of
%     Mittelbach's array.sty (array.sty v2.0h)}
%
% \changes{v3.04}{1992/11/12}
%    {(Jean-Pierre Drucbert) Longtable failed when used with
%     \cmd\includeonly.}
% \changes{v3.04}{1992/11/12}
%    {Fix bug which stopped \cmd\kill working correctly in headings.}
% \changes{v3.04}{1992/11/12}
%    {(Graham Gough) Made \cmd\setlongtables issue a warning message.}
% \changes{v3.04}{1992/11/12}
%    {(Sebastian Rahtz) longtable ran out of memory on really long
%     tables. Another bug introduced in V3!}
%
% \changes{v3.05}{1992/11/20}
%   {(Juergen Peus) Table was hard coded into the captions, Now the
%     captions use \cmd{\fnum@table}, so \cmd{\tablename} will be used.}
%
% \changes{v3.06}{1993/01/21}
%    {(Ingo Hoffmann) longtable fails with letter style.
%     The table counter is not defined, and the .aux file is not used in
%     the same way. This version will use a .lta file for letter style.}
%
% \changes{v3.07}{1993/06/09}
%    {Allow the LaTeX syntax \cmd\setcounter{LTchunksize}{10}}
%
% \changes{v3.08}{1993/06/09}
%     {Update for LaTeX2e}
%
% \changes{v3.09}{1994/03/15}
%     {New ltxdoc style}
%
% \changes{v3.11}{1994/05/22}
%      {Option handling added, new style errors and warnings}
%
% \CheckSum{879}
%
%
% \makeatletter
% \def\@oddfoot{\reset@font\rmfamily\dotfill Page \thepage\dotfill}
% \def\@oddhead{\dotfill{\reset@font\ttfamily longtable.sty}\dotfill}
% \def\ps@titlepage{\let\@oddhead\@empty}
% \makeatother
%
%
% \LTleft=\parindent
% \LTright=\fill
% \LTchunksize=10
%
% \def\v{\char`}
%
% ^^A \vbox to 100pt makes the page breaks the same on the first run.
% \changes{v3.08}{1993/06/09}
%     {No need to use \cmd{\vbox} with LaTeX2e minipage}
% \noindent\begin{minipage}[80pt]{\textwidth}
% \listoftables
% \end{minipage}
%
% \section{Introduction}
%
% {\tt longtable.sty} defines a new environment, \DescribeEnv{longtable}
% {\tt longtable}, which has most of the features of the {\tt tabular}
% environment, but produces tables which may be broken by \TeX's
% standard page-breaking algorithm. It also shares some features with
% the {\tt table} environment. In particular it uses the same counter,
% {\tt table}, and has a similar "\caption" command. Also, the standard
% "\listoftables" command lists tables produced by either the {\tt
% table} or {\tt longtable} environments.
%
% The following example uses most of the features of the {\tt longtable}
% environment. An edited listing of the input for this example appears
% in Section~\ref{listing}.
%
% \textbf{Note:} Various parts of the following table will
% \textbf{not} line up correctly. This is to demonstrate a feature of
% this package. Tables are not aligned unless a "\setlongtables"
% declaration is used (usually in the preamble) or equivalently on of
% the package options "set" or "final" is specified. See
% page~\pageref{READ-THIS-PARA} for more details.
%
% \begin{longtable}{@{*}r||p{1in}@{*}}
% KILLED & LINE!!!! \kill
% \caption[An optional caption (for the list of tables)]{A long
% table\label{long}}\\
% \hline\hline
% \multicolumn{2}{@{*}c@{*}}%
%      {This part appears at the top of the table}\\
% \sc First&\sc Second\\
% \hline\hline
% \endfirsthead
% \caption[]{(continued)}\\
% \hline\hline
% \multicolumn{2}{@{*}c@{*}}%
%       {This part appears at the top of every other page}\\
% \bf First&\bf Second\\
% \hline\hline
% \endhead
% \hline
% This goes at the&bottom.\\
% \hline
% \endfoot
% \hline
% These lines will&appear\\
% in place of the & usual foot\\
% at the end& of the table\\
% \hline
% \endlastfoot
% {\tt longtable}  columns  are specified& in the \\
% same way as  in the {\tt tabular}& environment.\\
% "@{*}r||p{1in}@{*}"& in this case.\\
% Each row ends with a& "\\" command.\\
% The "\\"  command  has an& optional\\
% argument, just as in& the\\
%  {\tt tabular}&environment.\\[10pt]
% See the  effect  of "\\[10pt]"&?\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Also  "\hline"  may be used,&  as in {\tt tabular}.\\
% \hline
% That  was a "\hline"&.\\
% \hline\hline
% That  was "\hline\hline"&.\\
% \multicolumn{2}{||c||}%
% {This is a \tt\v\\multicolumn\v{2\v}\v{||c||\v}}\\
% If a  page break  occurs at a "\hline" then& a line is drawn\\
% at the bottom of one  page  and at the& top of the next.\\
% \hline
% The  "[t] [b] [c]"  argument of {\tt tabular}& can  not be used.\\
% The optional argument may be  one of& "[l] [r] [c]"\\
% to specify whether  the  table  should be& adjusted\\
% to the  left, right& or centrally.\\
% \hline\hline
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Some lines may take up a lot of space, like this: &
%     \begin{flushright} This last column is a ``p'' column so this
%     ``row'' of the table can take up several lines. Note however that
%     \TeX\ will  never break a page within such a row. Page breaks only
%     occur between rows of the table or at "\hline" commands.
%     \end{flushright}\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% Lots of lines& like this.\\
% \hline
% Lots\footnote{This is a footnote.} of lines& like this.\\
% Lots   of   lines& like this\footnote{{\tt longtable} takes special
%     precautions, so that footnotes may also be used in `p' columns.}\\
% \hline
% Lots of lines& like this.\\
% Lots of lines& like this.
% \end{longtable}
%
% \section{Chunk Size}
%
% \DescribeMacro{\LTchunksize}
% In order to \TeX\ multi-page tables, it is necessary to break up the
% table into smaller chunks, so that \TeX\ does  not have to keep
% everything in memory at one time. By default {\tt longtable} uses 20
% rows per chunk, but this can be set by the user, with e.g.,
% "\LTchunksize=10".\footnote
%    {Since V3.07, you can also use the \LaTeX\ syntax
%    {\tt\v\\setcounter\v{LTchunksize\v}\v{10\v}.}}
% These chunks do not affect page breaking,
% thus if you are using a \TeX\ with a lot of memory, you can set
% "\LTchunksize" to be several pages of the table. \TeX\ will run
% faster with a large "\LTchunksize". However, if necessary, {\tt
% longtable} can work with "\LTchunksize=1", in which case the memory
% taken up is negligible.
% Note that if you use the commands for setting the table head or foot
% (see below), the "\LTchunksize" must be at least  as large as the
% number of rows in each of the head or foot sections.
%
% This document specifies "\LTchunksize=10".  If you look at the
% previous table, you will see that various parts of the table do not
% line up.\label{READ-THIS-PARA}
% Also \LaTeX\ will have printed a warning that the column
% widths had changed. {\tt longtable} writes information onto the {\tt
% .aux} file, so that it can line up the different chunks; however, it
% does not use this information unless a \DescribeMacro{\setlongtables}
% "\setlongtables" command is given before the table starts. It is best
% not to use this command until the document is nearly complete, as
% otherwise {\tt longtable} will leave enough room in each column for
% the widest entry {\it in all previous versions\/}. (At least since the
% {\tt .aux} file was last removed.)
%
% If you look at the preamble to this document, 
% you will see a line:\\
% "%\setlongtables"\\
% If you delete
% the "%" and re-\LaTeX\ the document, all the tables will line up
% perfectly. (You may need to \LaTeX\ the document twice if the {\tt
% .aux} file has been destroyed.)
%
% \begin{table}
% \centering
% \begin{tabular}{||l|l|l||}
% \hline\hline
% A&\tt tabular& environment\\
% \hline
% within&a floating& \tt table\\
% \hline\hline
% \end{tabular}
% \caption{A floating table}
% \end{table}
%
% \section{Captions and Headings}
%
% At the start of the table one may specify lines which are to appear at
% the top of every page (under the headline, but before the other lines
% of the table).
% \DescribeMacro{\endhead}
% The lines are entered as normal, but the last "\\" command is
% replaced by a "\endhead" command.
% \DescribeMacro{\endfirsthead}
% If the first page should have a different heading, then this should be
% entered in the same way, and terminated with the "\endfirsthead"
% command. The "\LTchunksize" should be at least as large as the
% number of rows in the heading.
% \DescribeMacro{\endfoot}
% There are also "\endfoot" and "\endlastfoot"
%\DescribeMacro{\endlastfoot}
% commands which are used in the same way (at the {\em start\/} of the
% table) to specify rows (or an "\hline") to appear at the bottom of
% each page. In certain situations, you may want to place lines which
% logically belong in the table body at the end of the {\tt firsthead},
% or the beginning of the {\tt lastfoot}. This helps to control which
% lines appear on the first and last page of the table.
%
% \DescribeMacro{\caption}%
% The "\caption{...}" command is essentially equivalent to\\
% "\multicolumn{n}{c}{\parbox{\LTcapwidth}{...}}"\\
% where {\tt n} is the number of columns of the table. You may set the
% width of the caption with a command such as
% "\setlength{\LTcapwidth}{3in}"
% in the preamble of your document. The default is 4in. "\caption" also
% writes the information to produce an entry in the list of tables. As
% with the "\caption" command in the {\tt figure} and {\tt table}
% environments, an optional argument specifies the text to appear in the
% list of tables if this is different from the text to appear in the
% caption. Thus the caption for table \ref{long} was specified as
% {\tt"\caption"[An optional caption (for the list of tables)]\{A long
%  table"\label{long}"\}}.
%
% You may wish the caption on later pages to be different to that on the
% first page. In this case put the "\caption" command in the first
% heading, and put a subsidiary caption in a "\caption[]" command in
% the main heading. If the optional argument to "\caption" is empty,
% no entry is made in the list of tables. Alternatively, if you do not
% want the table number to be printed each time, use the "\caption*"
% command.
%
% You may use the "\label" command so that you can cross reference
% {\tt longtable}s with "\ref". Note however, that the "\label" command
% should not be used in a heading that may appear more than once. Place
% it either in the {\tt firsthead}, or in the body of the table. It
% should not be the {\em first\/} command in any entry.
%
% \section{Multicolumn entries}
%
% "\multicolumn" entries present a particular problem for {\tt
% longtable}.
% Suppose we were trying to typeset the following table,
% with"\LTchunksize=1".
%
% {\LTchunksize=1
%
%   \begin{longtable}[c]{|l|l|}
%   \caption{A good example\label{good}}\\
%   \hline
%   \multicolumn{2}{|c|}{A wide multicolumn entry}\\
%   A wide column in a different chunk&narrow\\
%   \hline
%   \end{longtable}}
%
% If after the first chunk, {\tt longtable} had only seen the wide
% multicolumn entry, then it would think that the first column was very
% narrow (just containing the rules and glue specified by "|l|"). All
% the width of the multicolumn entry would be assumed to be in the
% second column. (This is a `feature' of \TeX's primitive "\halign"
% command.) {\tt longtable} would then pass the information that there
% is a wide second column to the second chunk, with the result that the
% final table would be much too wide, like this:
%
% {\LTchunksize=1
%   \let\LTmulticolumn\multicolumn
%
%   \begin{longtable}[c]{|l|l|}
%   \caption{A bad example\label{bad}}\\
%   \hline
%^^A
%^^A If you do not use the draft \multicolumn, you may have to use \kill
%^^A
%^^A A wide column in a different chunk&narrow\kill
%^^A
%   \multicolumn{2}{|c|}{A wide multicolumn entry}\\
%   A wide column in a different chunk&narrow\\
%   \hline
%   \end{longtable}}
%
% \DescribeMacro{\kill}%
% The solution to this problem used in Versions 1~and~2, was to use a
% "\kill" line. If a line is "\kill"ed, by using "\kill" rather than
% "\\" at the end of the line, it is used in calculating
% column widths, but removed from the final table. Thus entering a
% "\kill"ed copy of the second row before the multicolumn entry would
% mean that "\halign" `saw' the wide entry in the first column, and so
% did not widen the second column to make room for the multicolumn
% entry.
%
% In Version~3, a new solution has been introduced. If the saved row in
% the {\tt .aux} file is not being used, {\tt longtable} uses a special
% `draft' form of "\multicolumn", this modifies the definition, so the
% spanning entry is never considered to be wider than the columns it is
% spanning. So after the first pass, the {\tt .aux} file stores the
% widest normal entry for each column, no column has been widened due to
% "\span"ned columns. By default {\tt longtable} ignores the {\tt .aux}
% file, and so each run of \LaTeX\ is considered a first pass. Once the
% "\setlongtables" declaration is given, the saved row in the {\tt .aux}
% file, and the proper definition of "\multicolumn" are used. If any
% "\multicolumn" entry causes one of the columns to be widened, this
% information can not be passed back to earlier chunks, and so the table
% will not correctly line up until the third pass.
%
% This new system means that "\kill" is essentially redundant, however I
% think that some people will object to \LaTeX-ing a file three times,
% and so I have made it easy to revert to the Version~2 behaviour.
% Giving the declaration "\let\LTmulticolumn=\multicolumn" will stop
% multicolumn entries being set in draft mode, and so in order to avoid
% bad examples like Table~\ref{bad}, you will need to use "\kill" as
% discussed above.
%
% If you object even to \LaTeX-ing a file twice, you should
% disable "\LTmulticolumn" as above, and also make the first line of
% every {\tt longtable} a "\kill" line that contains the widest entry
% to be used in each column. All chunks will then line up on the first
% pass, and "\setlongtables" need not be used at all.
%
% \section{Adjustment}
%
% The last two tables also show the use of the optional argument. They
% are set with "\begin{longtable}[c] ..." specifying that the table
% should be centred. The other possible options are "[r]" and "[l]", for
% right  and left adjustment, respectively.
% \DescribeMacro{\LTleft}
% Normally centering is the default, but this document specifies
% \DescribeMacro{\LTright}
% "\LTleft=\parindent \LTright=\fill"
% in the preamble,\footnote
%    {Equivalent to {\tt\v\\setlength\v{\v\\LTleft\v}\v{\v\\parindent\v}
%                     \ \v\\setlength\v{\v\\LTright\v}\v{\v\\fill\v}}}
%  which means that the tables are set flush left, but
% indented by the usual paragraph indentation. Any lengths can be
% specified for these two parameters, but at least one of them should be
% a rubber length so that it fills up the width of the page, unless
% rubber lengths are added between the columns using the
% "\extracolsep" command.
%
% \section{Changes Since Version 2}
%
% There have been several changes made between versions 2 and 3.
% \begin{itemize}
% \item The mechanism for adding the head and foot of the table has been
% completely rewritten. With this new mechanism, {\tt longtable} does
% not need to issue a "\clearpage" at the start of the table, and so the
% table may start half way down a page. Also the "\endlastfoot" command
% which could not safely be implemented under the old scheme, has been
% added.
% \item {\tt longtable} now issues an error if started in the scope of
% "\twocolumn", or the {\tt multicols} environment.
% \item The separate documentation file {\tt longtable.tex} has been
% merged with the style file, {\tt longtable.sty} using Mittelbach's
% {\tt doc.sty}.
% \item Support for footnotes has been added. Note however that
% "\footnote" will not work in the `head' or `foot' sections of the
% table. In order to put a footnote in those sections (e.g., inside a
% caption), use "\footnotemark" at that point, and "\footnotetext"
% anywhere in the table \emph{body} that will fall on the same page.
% \item The treatment of "\multicolumn" has changed, making
% "\kill" lines unnecessary, at the price of sometimes requiring a
% third pass through \LaTeX.
% \item The "\newpage" command now works inside a {\tt longtable}.
% \end{itemize}
%
% In particular, the first of these changes means that Version~3 may not
% be able to exactly reproduce documents originally developed with
% Version~2, even if "\clearpage" commands are placed before and after
% the {\tt longtable} environment. For this reason, individual users,
% {\em not archives}, may want to retain Version~2 under a different
% name if they have documents using Version~2.
%
% \section{Summary}
%
% \begin{small}
% \begin{longtable}[l]{@{}l@{\hspace{10pt}}l@{}}
% \caption[A summary of {\tt longtable} commands]%
%         {\protect\normalsize A summary of {\tt longtable} commands}\\
% \multicolumn{2}{c}{\bf Parameters}\\
% \hline
% "\LTleft"&
%     Glue to the left of the table.           \hfill("\fill")\\
% "\LTright"&
%     Glue to the right of the table.          \hfill("\fill")\\
% "\LTpre"&
%     Glue before the the table.      \hfill("\bigskipamount")\\
% "\LTpost"&
%     Glue after the the table.       \hfill("\bigskipamount")\\
% "\LTchunksize"&
%     The number of rows per chunk.                 \hfill(20)\\
% "\LTcapwidth"&
%     The width of a parbox containing the caption.\hfill(4in)\\[5pt]
% \multicolumn{2}{c}{\bf Setlongtables}\\
% \hline
% "\setlongtables"&     Use column widths from the previous run.\\[5pt]
% \multicolumn{2}{c}{{\bf
%      Optional arguments to} \tt\v\\begin\v{longtable\v}}\\
% \hline
% \it none& Position as specified by "\LTleft" and "\LTright".\\
% \tt[c]&   Centre the table.\\
% \tt[l]&   Place the table flush left.\\
% \tt[r]&   Place the table flush right.\\[5pt]
% \multicolumn{2}{c}{{\bf Commands available inside} \tt longtable}\\
% \hline
% "\endhead"&
%     Specifies rows to appear at the top of every page.\\
% "\endfirsthead"&
%     Specifies rows to appear at the top the first page.\\
% "\endfoot"&
%     Specifies rows to appear at the bottom of every page.\\
% "\endlastfoot"&
%     Specifies rows to appear at the bottom of the last page.\\
% "\kill"&
%     Row is `killed', but is used in calculating widths.\\
% "\caption{foo}"&
%     Caption `Table ?: foo', and a `foo' entry in the list of tables.\\
% "\caption[bar]{foo}"&
%     Caption `Table ?: foo', and a `bar' entry in the list of tables.\\
% "\caption[]{foo}"&
%     Caption `Table ?: foo', but no entry in the list of tables.\\
% "\caption*{foo}"&
%     Caption `foo', but no entry in the list of tables.\\
% "\newpage"&
%     Force a page break.\\
% "\footnote"&
%     Footnotes, but may not be used in the table head \& foot.\\
% "\footnotemark"&
%     Footnotemark, May be used in the table head \& foot.\\
% "\footnotetext"&
%     Footnote text, Use in the table body.
% \end{longtable}
%
% \end{small}
%
% \clearpage
% \section{Verbatim highlights from Table \protect\ref{long}}
% \label{listing}
% \begingroup\catcode`\/=0
% \begin{verbatim}
% \begin{longtable}{@{*}r||p{1in}@{*}}
% KILLED & LINE!!!! \kill
% \caption[An optional caption /ldots]{A long table\label{long}}\\
% \hline\hline
% \multicolumn{2}{@{*}c@{*}}%
%      {This part appears at the top of the table}\\
% \sc First&\sc Second\\
% \hline\hline
% \endfirsthead
% \caption[]{(continued)}\\
% \hline\hline
% \multicolumn{2}{@{*}c@{*}}%
%       {This part appears at the top of every other page}\\
% \bf First&\bf Second\\
% \hline\hline
% \endhead
% \hline
% This goes at the&bottom.\\
% \hline
% \endfoot
% \hline
% These lines will&appear\\
% in place of the & usual foot\\
% at the end& of the table\\
% \hline
% \endlastfoot
% {\tt longtable}  columns  are specified& in the \\
% same way as  in the {\tt tabular}& environment.\\
% /ldots
% \multicolumn{2}{||c||}{This is a /ldots}\\
% /ldots
% Lots of lines& like this.\\
% /ldots
% \hline
% Lots\footnote{/ldots} of lines& like this.\\
% Lots   of   lines& like this\footnote{/ldots}\\
% \hline
% Lots of lines& like this.\\
% /ldots
% \end{longtable}
% \end{verbatim}
% \endgroup
%
% \StopEventually{}
%
% \section{The Macros}
%
%    \begin{macrocode}
%<*package>
%    \end{macrocode}
%
% \subsection{Initial code}
%
% Before declaring the package options, we must define some defaults
% here.
%
%  \begin{macro}{\LT@err}
% The error generating command
%    \begin{macrocode}
\def\LT@err{\PackageError{longtable}}
%    \end{macrocode}
%  \end{macro}
%
%  \begin{macro}{\LT@err}
% The warning generating command
%    \begin{macrocode}
\def\LT@warn{\PackageWarning{longtable}}
%    \end{macrocode}
%  \end{macro}
%
% \subsection{Options}
%
% The first two options deal with error handling. They are compatible
% with the options used by the \texttt{tracefnt} package.
%
%  \begin{macro}{errorshow}
% \emph{Only} show errors on the terminal. `warnings' are just sent to
% the log file.  
%    \begin{macrocode}
\DeclareOption{errorshow}{%
  \def\LT@warn{\PackageInfo{LT}}}
%    \end{macrocode}
%  \end{macro}
%
%  \begin{macro}{pausing}
%    \begin{macrocode}
\DeclareOption{pausing}{%
  \def\LT@warn##1{\PackageError{LT}{##1}{This is not really an error}}}
%    \end{macrocode}
%  \end{macro}
%
%  \begin{macro}{set}
%  \begin{macro}{final}
% The next options are just alternative syntax for the
% "\setlongtables" declaration.
%    \begin{macrocode}
\DeclareOption{set}{%
  \AtEndOfPackage{\setlongtables\let\setlongtables\relax}}
\DeclareOption{final}{%
  \ExecuteOptions{set}}
%    \end{macrocode}
%  \end{macro}
%  \end{macro}
%
%
%    \begin{macrocode}
\ProcessOptions
%    \end{macrocode}
%    \begin{macrocode}
%<*package>
%    \end{macrocode}
% \subsection{User Setable Parameters}
%
% \begin{macro}{\LTleft}
% \begin{macro}{\LTright}
% Glue to the left and right of the table, default "\fill" (ie
% centred).
%    \begin{macrocode}
\newskip\LTleft       \LTleft=\fill
\newskip\LTright      \LTright=\fill
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\LTpre}
% \begin{macro}{\LTpost}
% Glue before and after the {\tt longtable}.  "\bigskip" by default.
%    \begin{macrocode}
\newskip\LTpre        \LTpre=\bigskipamount
\newskip\LTpost       \LTpost=\bigskipamount
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\LTchunksize}
% Chunk size (The number of rows taken per "\halign"). Default 20.
%    \begin{macrocode}
\newcount\LTchunksize \LTchunksize=20
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@LTchunksize}
% Added in V3.07 to allow the purist syntax
% "\setcounter{LTchunksize}{10}".
%    \begin{macrocode}
\let\c@LTchunksize\LTchunksize
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LTcapwidth}
% Width of the "\parbox" containing the caption. Default 4in.
%    \begin{macrocode}
\newdimen\LTcapwidth  \LTcapwidth=4in
%    \end{macrocode}
% \end{macro}
%
% \subsection{Internal Parameters}
%
% \begin{macro}{\LT@head}
% \begin{macro}{\LT@firsthead}
% \begin{macro}{\LT@foot}
% \begin{macro}{\LT@lastfoot}
% Boxes for the table head and foot.
%    \begin{macrocode}
\newbox\LT@head
\newbox\LT@firsthead
\newbox\LT@foot
\newbox\LT@lastfoot
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\LT@cols}
% Counter for number of columns.
%    \begin{macrocode}
\newcount\LT@cols
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@rows}
% Counter for rows up to chunksize.
%    \begin{macrocode}
\newcount\LT@rows
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@LT@tables}
% Counter for the tables, added in V3.02. Previous versions just used
% the \LaTeX\ counter {\tt table}, but this fails if {\tt table} is
% reset during a document, eg {\tt report} class resets it every
% chapter.
%
% This was changed from "\newcount\LT@tables" in V3.04. \LaTeX\ counters
% are preserved correctly when "\includeonly" is used. In the rest of
% the file "\LT@tables" has been replaced by "\c@LT@tables" without
% further comment. Don't ask what "\relax" is doing here!
%    \begin{macrocode}
\newcounter{LT@tables}\relax
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\c@table}
% \begin{macro}{\fnum@table}
% \begin{macro}{\tablename}
% If the "table" counter is not defined (eg in "letter" style), define
% it. (Added in V3.06.)
%    \begin{macrocode}
\ifx\c@table\undefined
  \newcounter{table}
  \def\fnum@table{\tablename~\thetable}
\fi
\ifx\tablename\undefined
  \def\tablename{Table}
\fi
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \begin{macro}{\LT@out}
% In a normal style, "longtable" uses the ".aux" file to record the
% column widths. With "letter.sty", use a separate ".lta" file.
% (Added in V3.06.)
%    \begin{macrocode}
\ifx\startlabels\undefined
  \let\LT@out\@auxout
\else
  {\@input{\jobname.lta}}%
  \newwrite\LT@out
  \immediate\openout\LT@out=\jobname.lta
\fi
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@p@ftn}
% Temporary storage for footnote text in a `p' column.
%    \begin{macrocode}
\newtoks\LT@p@ftn
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@end@pen}
% Special penalty for the end of the table. Done this way to save using
% up a count register.
%    \begin{macrocode}
\mathchardef\LT@end@pen=30000
%    \end{macrocode}
% \end{macro}
%
% \subsection{The {\tt longtable} environment}
%
% \begin{macro}{\longtable}
% Called by "\begin{longtable}". This implementation does not work in
% multiple column formats. "\par" added at V3.04.
%    \begin{macrocode}
\def\longtable{%
  \par
  \ifx\multicols\@undefined\else
     \ifnum\col@number>\@ne\@twocolumntrue\fi\fi
  \if@twocolumn\LT@err{longtable not in 1-column mode}\@ehc\fi
  \begingroup
%    \end{macrocode}
% Check for an optional argument.
%    \begin{macrocode}
  \@ifnextchar[\LT@array{\LT@array[x]}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@array}
% Start setting the alignment. Based on "\@array" from {\tt latex.tex}
% and {\tt array.sty}.
%
% Since Version 3.02, {\tt longtable} has used the internal counter
% "\c@LT@tables". The \LaTeX\ counter {\tt table} is still incremented
% so that "\caption" works correctly.
%    \begin{macrocode}
\def\LT@array[#1]#2{%
  \refstepcounter{table}\global\advance\c@LT@tables\@ne
%    \end{macrocode}
% Set up the glue around the table if an optional argument given.
%    \begin{macrocode}
  \if l#1\LTleft\z@ \LTright\fill
   \else\if r#1\LTleft\fill \LTright\z@
     \else\if c#1\LTleft\fill \LTright\fill \fi\fi\fi
%    \end{macrocode}
% Set up these internal commands for {\tt longtable}.
%    \begin{macrocode}
  \global\let\LT@mcw@rn\relax\let\LT@mc\multicolumn
  \let\\\LT@tabularcr\def\newpage{\noalign{\break}}%
  \let\hline\LT@hline \let\kill\LT@kill\let\caption\LT@caption
  \@tempdima\ht\strutbox
%    \end{macrocode}
% Set up internal commands according to Lamport or Mittelbach.
%    \begin{macrocode}
  \ifx\extrarowheight\LT@undef
%    \end{macrocode}
% Initialise these commands as in {\tt latex.tex}.
%    \begin{macrocode}
    \let\@acol\@tabacol
    \let\@classz\@tabclassz \let\@classiv\@tabclassiv
    \def\@startpbox{\vtop\LT@startpbox}\let\LT@LL@FM@cr\@tabularcr
  \else
%    \end{macrocode}
% Initialise these commands as in {\tt array.sty}. "\d@llar" 
% replaced by "\d@llarbegin" "\d@llarend"  in V3.03 to match {\tt
% array.sty} V2.0h. We do not need to set "\d@llarbegin" and
% "\d@llarend"  as array.sty gives them the correct values at the top
% level.
%    \begin{macrocode}
    \advance\@tempdima\extrarowheight
    \col@sep\tabcolsep
    \let\@startpbox\LT@startpbox\let\LT@LL@FM@cr\@arraycr
  \fi
%    \end{macrocode}
% The rest of this macro is mainly based on {\tt array.sty}, but should
% work for the standard {\tt tabular} too.
%    \begin{macrocode}
  \setbox\@arstrutbox\hbox{\vrule
    \@height \arraystretch \@tempdima
    \@depth \arraystretch \dp \strutbox
    \@width \z@}%
  \let\@sharp##\let\protect\relax
%    \end{macrocode}
% Interpret the preamble argument.
%    \begin{macrocode}
   \begingroup
    \@mkpream{#2}%
%    \end{macrocode}
% We need to rename "\@preamble" here as F.M.'s scheme uses
% "\global", and we may need to nest "\@mkpream", eg for
% "\multicolumn"
% or an {\tt array}. We do not need to worry about nested longtables
% though!
%    \begin{macrocode}
    \xdef\LT@bchunk{\global\LT@rows\z@\setbox\z@\vbox\bgroup
       \tabskip\LTleft\halign to \hsize\bgroup
      \tabskip\z@ \@arstrut \@preamble \tabskip\LTright \cr}%
  \endgroup
%    \end{macrocode}
% Find out how many columns we have (store in "\LT@cols").
%    \begin{macrocode}
  \expandafter\LT@nofcols\LT@bchunk&\LT@nofcols
%    \end{macrocode}
% Get the saved row from "\LT@i"\ldots"\LT@ix" (from the {\tt
% .aux}  file), or make a new blank row.
%    \begin{macrocode}
  \LT@make@row
%    \end{macrocode}
% A few more internal commands for {\tt longtable}.
%    \begin{macrocode}
  \let\@endpbox\LT@endpbox
  \m@th\let\par\@empty
  \everycr{}\lineskip\z@\baselineskip\z@
%    \end{macrocode}
% Start the first chunk.
%    \begin{macrocode}
  \LT@bchunk}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@start}
% This macro starts the process of putting the table on the current
% page. It is not called until either a "\\" or "\endlongtable" command
% ends a chunk, as we do not know until that point which of the four
% possible head or foot sections have been specified.
%
% It begins by redefining itself, so that the table is only started
% once! Until V3.04, was redefined to "\relax", now use "\endgraf" to
% force the page-breaker to wake up.
%    \begin{macrocode}
\def\LT@start{%
  \let\LT@start\endgraf
  \endgraf\penalty\z@\vskip\LTpre
%    \end{macrocode}
% Start a new page if there is not enough room for the table head, foot,
% and one extra line.
%    \begin{macrocode}
  \dimen@\pagetotal
  \advance\dimen@ \ht\ifvoid\LT@firsthead\LT@head\else\LT@firsthead\fi
  \advance\dimen@ \dp\ifvoid\LT@firsthead\LT@head\else\LT@firsthead\fi
  \advance\dimen@ \ht\LT@foot
  \advance\dimen@ \ht\@arstrutbox
  \advance\dimen@ \dp\@arstrutbox
  \advance\dimen@ -\pagegoal
  \ifdim \dimen@>\z@\vfil\break\fi
%    \end{macrocode}
% If the foot is non empty, reduce the "\vsize" accordingly.
%    \begin{macrocode}
  \ifvoid\LT@foot\else
    \advance\vsize-\ht\LT@foot
    \dimen@\pagegoal\advance\dimen@-\ht\LT@foot\pagegoal\dimen@
    \maxdepth=\z@
  \fi
%    \end{macrocode}
% Put the table head on the page, and then switch to the new output
% routine.
%    \begin{macrocode}
  \ifvoid\LT@firsthead\copy\LT@head\else\box\LT@firsthead\fi
  \output{\LT@output}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\endlongtable}
% Called by "\end{longtable}".
%    \begin{macrocode}
\def\endlongtable{%
%    \end{macrocode}
% Essentially add a final "\\".
%    \begin{macrocode}
  \LT@echunk
  \LT@start
  \unvbox\z@
  \LT@get@widths
%    \end{macrocode}
% Write the dummy row to the ".aux" file.
% Since V3.06, use ".lta" for "letter.sty".
%    \begin{macrocode}
  \immediate\write\LT@out
%    \end{macrocode}
% Since Version 3.02, {\tt longtable} has used the internal counter
% "\c@LT@tables" rather than the \LaTeX\ counter {\tt table}.
%    \begin{macrocode}
    {\gdef\string\LT@\romannumeral\c@LT@tables{\LT@save@row}}%
%    \end{macrocode}
% Issue a warning if a "\multicolumn" has been set in draft mode.
%    \begin{macrocode}
  \LT@mcw@rn
%    \end{macrocode}
% If the last chunk has different widths than the first, warn the user.
%    \begin{macrocode}
  \ifx\LT@save@row\LT@@save@row\else
    \LT@warn{Column widths have changed\MessageBreak
             in table \thetable}\fi
%    \end{macrocode}
% Force one more go with the {\tt longtable} ouput routine.
%    \begin{macrocode}
  \endgraf\penalty -\LT@end@pen
%    \end{macrocode}
% Now close the group to return to the standard routine.
%    \begin{macrocode}
  \endgroup
%    \end{macrocode}
% Reset "\@mparbottom" to allow marginpars close to the end of the
% table.\footnote{This can not be the correct. However if it is omitted,
% there is a problem with marginpars, for example on page~3 of this
% document. Any Output Routine Gurus out there?}
%    \begin{macrocode}
  \global\@mparbottom\z@
  \pagegoal\vsize
  \endgraf\penalty\z@\addvspace\LTpost
%    \end{macrocode}
% Footnotes. As done in {\tt multicol.sty}.
%    \begin{macrocode}
  \ifvoid\footins\else\insert\footins{}\fi}
%    \end{macrocode}
% \end{macro}
%
% \subsection{Counting Columns}
%
% Columns are counted by examining "\@preamble", rather than simply
% getting "\@mkpream" to increment the counter as it builds the
% preamble so that this package works with many of the packages which
% add extra column specifiers to \LaTeX's standard ones.
%
%  Version~1 counted "\@sharp"'s to calculate the number of columns,
%  this was changed for Version~2 as it does not work with the NFSS. Now
%  count "&"'s. ({\tt lfonts.new} defines "\@tabclassz" so that
%  "\@sharp" is inside a group.)
%
% \begin{macro}{\LT@nofcols}
% Find the next "&", then look ahead to see what is next.
%    \begin{macrocode}
\def\LT@nofcols#1&{\futurelet\LT@next\LT@n@fcols}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@n@fcols}
% Add one, then stop at an "\LT@nofcols" or look for the next
% "&". The "\expandafter" trick was added in Version~3, also the
% name changed from "\@LT@nofcols" to preserve the "\LT@" naming
% convention.
%    \begin{macrocode}
\def\LT@n@fcols{\advance\LT@cols\@ne
  \ifx\LT@next\LT@nofcols\expandafter\@gobble
  \else\expandafter\LT@nofcols\fi}
%    \end{macrocode}
% \end{macro}
%
% \subsection{The {\tt \bslash\bslash} and {\tt \bslash kill} Commands}
%
% \begin{macro}{\LT@tabularcr}
% The internal definition of "\\".
%    \begin{macrocode}
\def\LT@tabularcr{%
%    \end{macrocode}
% Increment the counter, and do  {\tt tabular}'s "\\" or finish the
% chunk.\\ The "\expandafter" trick was added in Version~3.
%    \begin{macrocode}
  \global\advance\LT@rows\@ne \ifnum\LT@rows=\LTchunksize
  \expandafter\LT@t@bularcr\else\expandafter\LT@LL@FM@cr\fi}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@t@bularcr}
% This definition also accepts "\\*", which acts in the same way as
% "\\". {\tt tabular} does this, but {\tt longtable} probably ought to
% make "\\*" prevent page breaking.
% "{\ifnum0=`}\fi" added in version 3.01, required if the first entry
% is empty.
%    \begin{macrocode}
\def\LT@t@bularcr{{\ifnum0=`}\fi
  \@ifstar{\LT@xtabularcr}{\LT@xtabularcr}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@xtabularcr}
% This justs looks for an optional argument.
%    \begin{macrocode}
\def\LT@xtabularcr{\@ifnextchar[{\LT@argtabularcr}{\LT@ntabularcr}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@ntabularcr}
% The version with no optional argument.
% "\ifnum0=`{\fi}" added in version 3.01.
%    \begin{macrocode}
\def\LT@ntabularcr{%
  \ifnum0=`{\fi}%
  \LT@echunk
  \LT@start
  \unvbox\z@
  \LT@get@widths
  \LT@bchunk}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@argtabularcr}
% The version with an optional argument.
% "\ifnum0=`{\fi}" added in version 3.01.
%    \begin{macrocode}
\def\LT@argtabularcr[#1]{%
  \ifnum0=`{\fi}%
  \ifdim #1>\z@
  \unskip\@xargarraycr{#1}\else \@yargarraycr{#1}\fi
%    \end{macrocode}
% Add the dummy row, and finish the "\halign".
%    \begin{macrocode}
  \LT@echunk
  \LT@start
  \unvbox\z@
  \LT@get@widths
  \LT@bchunk}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@echunk}
% This ends the current chunk, and removes the dummy row.
%    \begin{macrocode}
\def\LT@echunk{%
  \crcr\LT@save@row\cr\egroup
  \global\setbox\@ne\lastbox
  \egroup}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@kill}
% This ends the current chunk as above, but strips off two rows, the
% `dummy row' and the `killed row' before starting the next chunk.
% Since V3.04, the old chunk is reboxed at the start of the box
% containing the next chunk. This allows "\kill" to be used in headers,
% which must be processed in a single box.
%    \begin{macrocode}
\def\LT@kill{%
  \LT@echunk
  \LT@get@widths
  \expandafter\LT@rebox\LT@bchunk}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@rebox}
% Drop the old chunk (box0) back at the top of the new chunk, removing
% the killed row. This macro added at V3.04.
%    \begin{macrocode}
\def\LT@rebox#1\bgroup{#1\bgroup\unvbox\z@\unskip\setbox\z@=\lastbox}%
%    \end{macrocode}
%    \begin{macrocode}

%    \end{macrocode}
% \end{macro}
%
% \subsection{The Dummy Row}
%
% \begin{macro}{\LT@blank@row}
% Create a blank row if we are not using the info in the .aux file. Also
% use the draft form of "\multicolumn".
%    \begin{macrocode}
\def\LT@blank@row{%
  \let\multicolumn\LTmulticolumn
    {\xdef\LT@save@row{\omit}%
    \loop
    \advance\LT@cols\m@ne
    \ifnum\LT@cols>\z@
    \xdef\LT@save@row{\LT@save@row&\omit}%
    \repeat}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@make@row}
% By default do not use information in the {\tt .aux} file.
%    \begin{macrocode}
\let\LT@make@row\LT@blank@row
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\setlongtables}
% Redefine "\LT@make@row" to use information in the {\tt .aux} file,
% if there is a saved row for this table.
%
% Since Version 3.02, {\tt longtable} has used the internal counter
% "\c@LT@tables" rather than the \LaTeX\ counter {\tt table}.
% The warning message was added at V3.04, as was the "\global", to stop
% save-stack overflow.
%    \begin{macrocode}
\def\setlongtables{%
  \LT@warn{%
    \noexpand\setlongtables is in force.%
    \MessageBreak
    If you have edited the file since the last LaTeX run%
    \MessageBreak
    incorrect column widths, or even errors,%
    \MessageBreak
    may be produced.%
    \@gobbletwo}%
  \def\LT@make@row{%
    \global\expandafter\let\expandafter\LT@save@row
      \csname LT@\romannumeral\c@LT@tables\endcsname
    \ifx\LT@save@row\relax\LT@blank@row\fi}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@get@widths}
% This is the heart of {\tt longtable}. If it were not for the table
% head and foot, this macro together with the modified "\\" command
% would form the basis of quite a simple little package file for long
% tables. It is closely modelled on the "\endvrulealign" macro of
% appendix D of the \TeX{}Book.
%    \begin{macrocode}
\def\LT@get@widths{%
%    \end{macrocode}
% "\global" added at V3.04, to stop save-stack overflow.
%    \begin{macrocode}
  \global\let\LT@save@row\end
%    \end{macrocode}
% Loop through the last row, discarding glue, and saving box widths. At
% V3.04 changed the scratch box to 2, as the new "\kill" requires that
% "\box0" be preserved.
%    \begin{macrocode}
  \setbox\tw@=\hbox{\unhbox\@ne
    \loop
    \unskip
    \setbox\tw@=\lastbox
    \ifhbox\tw@
      \LT@def@row
    \repeat}%
%    \end{macrocode}
% Remember the widths if we are in the first chunk.
%    \begin{macrocode}
  \ifx\LT@@save@row\LT@undef\let\LT@@save@row\LT@save@row\fi}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@def@row}
% Add a column to the dummy row. Name changed from "\defLT@save@row"
% in Version~3, to preserve the "\LT@" naming convention.
%    \begin{macrocode}
\def\LT@def@row{\ifx\LT@save@row\end
  \xdef\LT@save@row{\omit\kern\the\wd\tw@}\else
  \xdef\LT@save@row{\omit\kern\the\wd\tw@&\LT@save@row}\fi}
%    \end{macrocode}
% \end{macro}
%
% \subsection{The {\tt\bslash hline} Command}
%
% \begin{macro}{\LT@hline}
% "\hline" and "\hline\hline" both produce {\em two\/} lines.
% The only difference being the glue and penalties between them.
% This is so that a page break at a "\hline" produces a line on both
% pages.\footnote
% {{\tt longtable} has always done this, but perhaps it would be
% better if hlines were {\em omitted\/} at a page break, as the head and
% foot usually put a hline here anyway.}
% Also this "\hline" is more like a "\cline[1-\LT@cols]".
% {\tt tabular}'s "\hline" would draw lines the full width of the page.
%    \begin{macrocode}
\def\LT@hline{\noalign{\ifnum0=`}\fi
   \penalty\@M
   \futurelet\LT@next\LT@@hline}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@@hline}
% This code is based on "\cline". Two copies of the line are produced,
% as described above.
%    \begin{macrocode}
\def\LT@@hline{%
  \ifx\LT@next\hline
    \global\let\LT@next\@gobble
    \gdef\LT@sep{\penalty-\@medpenalty\vskip\doublerulesep}%
  \else
    \global\let\LT@next\empty
    \gdef\LT@sep{\penalty-\@lowpenalty\vskip-\arrayrulewidth}%
  \fi\ifnum0=`{\fi}%
  \multispan\LT@cols
     \unskip\leaders\hrule\@height\arrayrulewidth\hfill\cr
  \noalign{\LT@sep}%
  \multispan\LT@cols
     \unskip\leaders\hrule\@height\arrayrulewidth\hfill\cr
  \noalign{\penalty\@M}%
  \LT@next}
%    \end{macrocode}
% \end{macro}
%
% \subsection{Captions}
%
% \begin{macro}{\LT@caption}
% The caption is "\multicolumn{\LT@cols}{c}{"\meta{a parbox with the
% table's caption}"}"
%    \begin{macrocode}
\def\LT@caption{\noalign\bgroup
  \@ifnextchar[{\egroup\LT@c@ption}{\LT@capti@n}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@c@ption}
% Caption command (with [optional argument]).  "\protect" added in
% Version~3. "\fnum@table" added at V3.05.
%    \begin{macrocode}
\def\LT@c@ption[#1]#2{%
  \LT@mkcaption{\fnum@table: #2}%
  \def\@tempa{#1}\ifx\@tempa\empty\else
     {\let\\\space
     \addcontentsline{lot}{table}{\protect\numberline{\thetable}{#1}}}%
  \fi}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@capti@n}
% Caption command (no [optional argument])
%    \begin{macrocode}
\def\LT@capti@n{\@ifstar{\egroup\LT@mkcaption}{\egroup\LT@@c@ption}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@@c@ption}
% Caption command (no [optional argument] or *). "\protect" added in
% Version~3. "\fnum@table" added at V3.05.
%    \begin{macrocode}
\def\LT@@c@ption#1{%
  \LT@mkcaption{\fnum@table: #1}%
  {\let\\\space
   \addcontentsline{lot}{table}{\protect\numberline{\thetable}{#1}}}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@mkcaption}
% Put the caption in a box of width 0pt, so that it never affects the
% column widths. Inside that is a "\parbox" of width
% "\LTcapwidth".
%    \begin{macrocode}
\def\LT@mkcaption#1{%
  \LT@mc{\LT@cols}{c}{\hbox to \z@{\hss\parbox[t]{\LTcapwidth}{%
%    \end{macrocode}
% {\tt article.sty}'s "\@makecaption" (without the 10pt skip at the
% top).
%    \begin{macrocode}
    \setbox\@tempboxa\hbox{#1}%
   \ifdim \wd\@tempboxa >\hsize #1
     \else \hbox to\hsize{\hfil\box\@tempboxa\hfil}\fi
            \endgraf\vskip\baselineskip}\hss}}}
%    \end{macrocode}
% \end{macro}
%
% \subsection{The Output Routine}
%
% The method used here for interfacing a special purpose output routine
% to the standard \LaTeX\ routine is lifted straight out of
% F.~Mittelbach's {\tt multicol.sty}.
%
% \begin{macro}{\LT@output}
%     Actually this is not so bad, with FM leading the way.
%    \begin{macrocode}
\def\LT@output{%
  \ifnum\outputpenalty <-\@Mi
    \ifnum\outputpenalty > -\LT@end@pen
%    \end{macrocode}
%     If this was a float or a marginpar we complain.
%    \begin{macrocode}
      \LT@err{floats and marginpars not allowed in a longtable}\@ehc
    \else
%    \end{macrocode}
% We have reached the end of the table, on the scroll at least,
%    \begin{macrocode}
      \setbox\z@\vbox{\unvbox\@cclv}%
      \ifdim \ht\LT@lastfoot>\ht\LT@foot
%    \end{macrocode}
% The last foot might not fit, so:\footnote{An alternative would be to
% vsplit off a bit of the last chunk, so that the last page did not just
% have head and foot sections, but it is hard to do this in a consistent
% manner.}
%    \begin{macrocode}
        \dimen@=\pagegoal
        \advance\dimen@-\ht\LT@lastfoot
        \ifdim\dimen@<\ht\z@
          \setbox\@cclv=\vbox{\unvbox\z@\copy\LT@foot\vss}%
          \@makecol
          \@outputpage
          \setbox\z@\vbox{\box\LT@head}%
%    \end{macrocode}
% End of "\ifdim\dimen@<\ht\@cclc".
%    \begin{macrocode}
        \fi
%    \end{macrocode}
% End of "\ifdim \ht\LT@lastfoot > \ht\LT@foot".
%    \begin{macrocode}
      \fi
      \vbox
        {\unvbox\z@\box\ifvoid\LT@lastfoot\LT@foot\else\LT@lastfoot\fi}%
%    \end{macrocode}
% End of "\ifnum\outputpenalty > -\LT@end@pen".
%    \begin{macrocode}
    \fi
%    \end{macrocode}
% Else "\outputpenalty > -\@Mi".
%    \begin{macrocode}
  \else
%    \end{macrocode}
% If we have not reached the end of the table,
%    \begin{macrocode}
    \setbox\@cclv=\vbox{\unvbox\@cclv\copy\LT@foot\vss}%
    \@makecol
    \@outputpage
%    \end{macrocode}
% Put the head at the top of the next page.
%    \begin{macrocode}
    \copy\LT@head
%    \end{macrocode}
% End of "\ifnum\outputpenalty <-\@Mi".
%    \begin{macrocode}
  \fi}
%    \end{macrocode}
% \end{macro}
%
% \subsection{Commands for the the table head and foot}
%
% \begin{macro}{\LT@end@hd@ft}
% The core of "\endhead" and friends. Store the current chunk in the
% box specified by "#1". Issue an error if the table has already
% started. Then start a new chunk.
%    \begin{macrocode}
\def\LT@end@hd@ft#1{%
  \LT@echunk
%    \end{macrocode}
% Changed from "\relax" to "\endgraf" at V3.04, see "\LT@start".
%    \begin{macrocode}
  \ifx\LT@start\endgraf\LT@err
   {Longtable head or foot not at start of table}%
   {Increase LTchunksize}\fi
  \setbox#1\box\z@
  \LT@get@widths
  \LT@bchunk}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\endfirsthead}
% \begin{macro}{\endhead}
% \begin{macro}{\endfoot}
% \begin{macro}{\endlastfoot}
% Call "\LT@end@hd@ft" with the appropriate box.
%    \begin{macrocode}
\def\endfirsthead{\LT@end@hd@ft\LT@firsthead}
\def\endhead{\LT@end@hd@ft\LT@head}
\def\endfoot{\LT@end@hd@ft\LT@foot}
\def\endlastfoot{\LT@end@hd@ft\LT@lastfoot}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsection{The {\tt\bslash multicolumn} command}
%
% \begin{macro}{\LTmulticolumn}
% A temporary definition of "\multicolumn" to use if we are ignoring
% the saved row in the {\tt .aux} file.
% Hide the width of the entry with "\hidewidth\null", and warn the
% user at the end that this `draft' version of "\multicolumn" has been
% used.
%    \begin{macrocode}
\def\LTmulticolumn#1#2#3{%
  \LT@mc{#1}{#2}{#3}\hidewidth\null
  \global\let\LT@mcw@rn\LT@mcwarn}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@mcwarn}
% Typeout a warning if "\LTmulticolumn" has been used.
%    \begin{macrocode}
\def\LT@mcwarn{\LT@warn{%
  \string\multicolumn\space set in draft mode\MessageBreak
   in table \thetable}}
%    \end{macrocode}
% \end{macro}
%
% \subsection{Footnotes}
%
% The standard "\footnote" command works in a {\tt c} column, but we
% need to modify the definition in a {\tt p} column to overcome the
% extra level of boxing. These macros are based on {\tt array.sty}, but
% should be OK for the standard {\tt tabular}.
%
% \begin{macro}{\LT@startpbox}
% Add extra code to switch the definition of "\@footnotetext".
%    \begin{macrocode}
\def\LT@startpbox#1{\bgroup
  \let\@footnotetext\LT@p@ftntext\hsize #1 \@arrayparboxrestore
  \vrule \@height \ht\@arstrutbox \@width \z@}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@endpbox}
% After the parbox is closed, expand "\LT@p@ftn" which will execute a
% series of\\
% "\footnotetext["\meta{num}"]{"\meta{note}"}"\\
% commands. After being lifted out of the parbox, they can migrate on
% their own from here.
% \changes{v3.10}{1994/05/15}
%     {Use \cs{@finalstrut}}
%    \begin{macrocode}
\def\LT@endpbox{\@finalstrut\@arstrutbox\egroup
       \the\LT@p@ftn\global\LT@p@ftn{}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\LT@p@ftntext}
% Inside the `p' column, just save up the footnote text in a token
% register.
%    \begin{macrocode}
\def\LT@p@ftntext#1{%
  \edef\@tempa{\the\LT@p@ftn\noexpand\footnotetext[\the\c@footnote]}%
  \global\LT@p@ftn\expandafter{\@tempa{#1}}}%
%    \end{macrocode}
% \end{macro}
%
%    \begin{macrocode}
%</package>
%    \end{macrocode}
%
% \Finale
\endinput
