Release notes for the Comtrol Rocketport Driver.

Version 1.07, 11-Jul-95
=======================

Fixed documentation file HW-INSTALL so that the dip switches 7 and 8
are labeled MUST BE ON instead of MUST BE OFF.

Added code to reserve, check, and release IO port reservations.

Version 1.06, 21-May-95
=======================

Fixed a bug which caused odd and even parity to be incorrectly set
when parity was enabled.

Version 1.05, 19-May-95
=======================

Fixed bug in the rocketport driver which caused it to produce kernel
OOPS if a hangup occurred while data was being transmitted.

Fixed bug in the rocketport driver which caused it to not work with
the SLIP driver.  (Actually, whether the bug was in the rocketport
driver or in the SLIP driver is not quite clear, since the SLIP driver
was using the tty driver interface in a non-standard fashion.)

Changed the naming of the callout ports from /dev/cuR## to /dev/cur##.
This is to conform with the proposed new serial port device naming
scheme.  Note that if you were using version 1.04, and had configured
your system to use the callout ports, you may need to change some
configuration files.  For backwards compatibility, setrocket will
generate device names using the old device name if the -o flag is
passed to it, but it is suggested that you transition to the new
names.

Version 1.04, 25-Mar-95
=======================

Initial public release of the Comtrol Rocketport Driver.
