#!/bin/bash

# bluez.SlackBuild
# Heavily based on the original Slackware build scripts,
# Modified by Stuart Winter for Slackware ARM.
#
# Copyright 2009, 2010  Patrick J. Volkerding, Sebeka, Minnesota, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


# Record toolchain & other info for the build log:
slackbuildinfo

# Paths to skeleton port's source & real Slackware source tree:
export CWD=$SLACKSOURCE/$PKGSERIES/$PKGNAM
export PORTCWD=$PWD

# Temporary build locations:
export TMPBUILD=$TMP/build-$PKGNAM
export PKG=$TMP/package-$PKGNAM
mkpkgdirs # Delete & re-create temporary directories then cd into $TMPBUILD

# Determine the CFLAGS for the known architectures:
case $ARCH in
   arm)     export SLKCFLAGS="-O2 -march=armv5te"
            export LIBDIRSUFFIX="" ;;
   *)       export SLKCFLAGS="-O2" ;;
esac

# Extract source:
tar xvvf $CWD/$PKGNAM-$VERSION.tar.xz
cd $PKGNAM-$VERSION || exit 1
slackhousekeeping

# Start bluetoothd via a wrapper script to check rc.bluetooth's +/-x first
zcat $CWD/bluez-run_udev_helper.patch.gz | patch -p1 --verbose || exit 1

# Enable the audio socket in audio.conf:
zcat $CWD/bluez.enable.audio.socket.diff.gz | patch -p1 --verbose || exit 1

# Configure:
CFLAGS="$SLKCFLAGS" \
CXXFLAGS="$SLKCFLAGS" \
./configure \
   --prefix=/usr \
   --libdir=/usr/lib${LIBDIRSUFFIX} \
   --sysconfdir=/etc \
   --mandir=/usr/man \
   --localstatedir=/var \
   --enable-datafiles \
   --enable-audio \
   --enable-gstreamer \
   --enable-alsa \
   --enable-usb \
   --enable-tools\
   --enable-input \
   --enable-bccmd \
   --enable-hid2hci \
   --enable-dfutool \
   --enable-hidd \
   --enable-pand \
   --enable-dund \
   --enable-cups \
   --enable-service \
   --enable-network \
   --enable-serial \
   --enable-health \
   --enable-pnat \
   --enable-maemo6 \
   --enable-wiimote \
   --enable-test \
   --enable-dbusoob \
   --with-ouifile=/usr/share/hwdata/oui.txt \
   --disable-silent-rules \
   --build=$ARCH-slackware-linux-gnueabi || failconfig

# Build:
make $NUMJOBS || make || exit 1

# Install into package:
make install DESTDIR=$PKG

cp -fav scripts/bluetooth-serial.rules $PKG/lib/udev/rules.d/97-bluetooth-serial.rules || exit 1
cp -fav scripts/bluetooth_serial $PKG/lib/udev/bluetooth_serial || exit 1
chmod 0755 $PKG/lib/udev/bluetooth_serial

mkdir -p $PKG/etc/bluetooth
cp -a audio/audio.conf $PKG/etc/bluetooth
cp -a input/input.conf $PKG/etc/bluetooth
cp -a network/network.conf $PKG/etc/bluetooth
cp -a serial/serial.conf $PKG/etc/bluetooth
chmod 644 $PKG/etc/bluetooth/*.conf

mkdir -p $PKG/etc/alsa
mv $PKG/usr/share/alsa/bluetooth.conf $PKG/etc/alsa
( cd $PKG/usr/share/alsa ; ln -s ../../../etc/alsa/bluetooth.conf . )

# Do not overwrite configuration
# Well, let the dbus file be overwritten, as it is not usually user-edited.
( cd $PKG
  for file in \
    etc/alsa/bluetooth.conf \
    etc/bluetooth/audio.conf \
    etc/bluetooth/input.conf \
    etc/bluetooth/network.conf \
    etc/bluetooth/serial.conf \
    etc/bluetooth/rfcomm.conf \
    etc/bluetooth/main.conf \
    etc/modprobe.d/bluetooth.conf ; do
      mv ${file} ${file}.new
  done
)

# Add the wrapper script
install -vpm755 $CWD/config/bluetooth.sh $PKG/lib/udev/

# Add an init script
mkdir -p $PKG/etc/rc.d
cat $CWD/config/rc.bluetooth > $PKG/etc/rc.d/rc.bluetooth.new

# Copy docs:
mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
cp -a \
  AUTHORS COPYING* INSTALL NEWS README* \
  $PKG/usr/doc/$PKGNAM-$VERSION
changelogliposuction ChangeLog $PKGNAM $VERSION # Trim down a "ChangeLog" file

# If necessary, start the fakeroot server so we can set file/dir ownerships:
start_fakeroot

# Apply generic Slackware packaging policies:
cd $PKG
slackstripall   # strip all .a archives and all ELFs
slackgzpages -i # compress man & info pages and delete usr/info/dir
slackslack      # chown -R root:root, chmod -R og-w, slackchown, slack644docs
slackdesc       # install slack-desc and doinst.sh
slackmp         # run makepkg -l y -c n

# Perform any final checks on the package:
cd $PKG
slackhlinks     # search for any hard links