Postfix manual - sendmail(1)

    SENDMAIL(1)                                                        SENDMAIL(1)

    NAME
           sendmail - Postfix to Sendmail compatibility interface

    SYNOPSIS
           sendmail [option ...] [recipient ...]

           mailq
           sendmail -bp

           newaliases
           sendmail -I

    DESCRIPTION
           The  Postfix sendmail(1) command implements the Postfix to
           Sendmail compatibility interface.  For the sake of compat-
           ibility with existing applications, some Sendmail command-
           line options are recognized but silently ignored.

           By default, Postfix sendmail(1) reads a message from stan-
           dard  input until EOF or until it reads a line with only a
           . character, and arranges  for  delivery.   Postfix  send-
           mail(1)  relies  on  the  postdrop(1)  command to create a
           queue file in the maildrop directory.

           Specific command aliases are  provided  for  other  common
           modes of operation:

           mailq  List  the  mail  queue.  Each entry shows the queue
                  file ID, message size, arrival  time,  sender,  and
                  the recipients that still need to be delivered.  If
                  mail could not be delivered upon the last  attempt,
                  the reason for failure is shown. This mode of oper-
                  ation is implemented by executing the  postqueue(1)
                  command.

           newaliases
                  Initialize the alias database.  If no input file is
                  specified (with the -oA  option,  see  below),  the
                  program  processes  the  file(s) specified with the
                  alias_database  configuration  parameter.   If   no
                  alias  database type is specified, the program uses
                  the type specified with  the  default_database_type
                  configuration parameter.  This mode of operation is
                  implemented by running the postalias(1) command.

                  Note: it may take a minute or so  before  an  alias
                  database  update  becomes visible. Use the "postfix
                  reload" command to eliminate this delay.

           These and other features can be selected by specifying the
           appropriate combination of command-line options. Some fea-
           tures are controlled by parameters in the main.cf configu-
           ration file.

           The following options are recognized:

           -Am (ignored)

           -Ac (ignored)
                  Postfix  sendmail  uses the same configuration file
                  regardless of whether or not a message is  an  ini-
                  tial submission.

           -B body_type
                  The message body MIME type: 7BIT or 8BITMIME.

           -bd    Go  into  daemon  mode.  This  mode of operation is
                  implemented by executing the "postfix  start"  com-
                  mand.

           -bh (ignored)

           -bH (ignored)
                  Postfix has no persistent host status database.

           -bi    Initialize  alias database. See the newaliases com-
                  mand above.

           -bm    Read mail  from  standard  input  and  arrange  for
                  delivery.  This is the default mode of operation.

           -bp    List the mail queue. See the mailq command above.

           -bs    Stand-alone  SMTP  server  mode. Read SMTP commands
                  from standard input, and write responses  to  stan-
                  dard output.  In stand-alone SMTP server mode, mail
                  relaying and other access controls are disabled  by
                  default.  To  enable  them,  run the process as the
                  mail_owner user.

                  This mode of operation is  implemented  by  running
                  the smtpd(8) daemon.

           -bv    Do  not collect or deliver a message. Instead, send
                  an email  report  after  verifying  each  recipient
                  address.    This  is  useful  for  testing  address
                  rewriting and routing configurations.

                  This feature is available in  Postfix  version  2.1
                  and later.

           -C config_file

           -C config_dir
                  The  path  name  of the Postfix main.cf file, or of
                  its parent directory. This information  is  ignored
                  with Postfix versions before 2.3.

                  With all Postfix versions, you can specify a direc-
                  tory  pathname  with  the  MAIL_CONFIG  environment
                  variable  to override the location of configuration
                  files.

           -F full_name
                  Set the sender full name. This overrides  the  NAME
                  environment  variable,  and  is used only with mes-
                  sages that have no From: message header.

           -f sender
                  Set  the  envelope  sender  address.  This  is  the
                  address  where  delivery problems are sent to. With
                  Postfix versions before 2.1, the Errors-To: message
                  header overrides the error return address.

           -G     Gateway  (relay)  submission, as opposed to initial
                  user submission.  Either do not  rewrite  addresses
                  at  all,  or  update  incomplete addresses with the
                  domain information specified with remote_header_re-
                  write_domain.

                  This  option is ignored before Postfix version 2.3.

           -h hop_count (ignored)
                  Hop count limit. Use the hopcount_limit  configura-
                  tion parameter instead.

           -I     Initialize  alias database. See the newaliases com-
                  mand above.

           -i     When reading a message from standard  input,  don't
                  treat  a line with only a . character as the end of
                  input.

           -L label (ignored)
                  The logging label. Use the  syslog_name  configura-
                  tion parameter instead.

           -m (ignored)
                  Backwards compatibility.

           -N dsn (default: 'delay, failure')
                  Delivery   status   notification  control.  Specify
                  either a comma-separated list with one or  more  of
                  failure  (send  notification  when delivery fails),
                  delay (send notification when delivery is delayed),
                  or  success  (send notification when the message is
                  delivered); or specify never (don't send any  noti-
                  fications at all).

                  This feature is available in Postfix 2.3 and later.

           -n (ignored)
                  Backwards compatibility.

           -oAalias_database
                  Non-default alias  database.  Specify  pathname  or
                  type:pathname. See postalias(1) for details.

           -O option=value (ignored)
                  Backwards compatibility.

           -o7 (ignored)

           -o8 (ignored)
                  To send 8-bit or binary content, use an appropriate
                  MIME encapsulation and specify the  appropriate  -B
                  command-line option.

           -oi    When  reading  a message from standard input, don't
                  treat a line with only a . character as the end  of
                  input.

           -om (ignored)
                  The  sender  is  never  eliminated  from alias etc.
                  expansions.

           -o x value (ignored)
                  Set option x to value. Use the equivalent  configu-
                  ration parameter in main.cf instead.

           -r sender
                  Set  the  envelope  sender  address.  This  is  the
                  address where delivery problems are sent  to.  With
                  Postfix versions before 2.1, the Errors-To: message
                  header overrides the error return address.

           -R return_limit (ignored)
                  Limit  the  size   of   bounced   mail.   Use   the
                  bounce_size_limit  configuration parameter instead.

           -q     Attempt to deliver all queued mail. This is  imple-
                  mented by executing the postqueue(1) command.

                  Warning:  flushing  undeliverable  mail  frequently
                  will result in poor  delivery  performance  of  all
                  other mail.

           -qinterval (ignored)
                  The   interval   between   queue   runs.   Use  the
                  queue_run_delay configuration parameter instead.

           -qIqueueid
                  Schedule immediate delivery of mail with the speci-
                  fied  queue ID.  This option is implemented by exe-
                  cuting the postqueue(1) command, and  is  available
                  with Postfix version 2.4 and later.

           -qRsite
                  Schedule  immediate  delivery  of  all mail that is
                  queued for the named site. This option accepts only
                  site  names  that are eligible for the "fast flush"
                  service,  and  is  implemented  by  executing   the
                  postqueue(1) command.  See flush(8) for more infor-
                  mation about the "fast flush" service.

           -qSsite
                  This command is not  implemented.  Use  the  slower
                  "sendmail -q" command instead.

           -t     Extract  recipients from message headers. These are
                  added to any recipients specified  on  the  command
                  line.

                  With  Postfix  versions  prior  to 2.1, this option
                  requires that no recipient addresses are  specified
                  on the command line.

           -U (ignored)
                  Initial user submission.

           -V envid
                  Specify the envelope ID for notification by servers
                  that support DSN.

                  This feature is available in Postfix 2.3 and later.

           -XV (Postfix 2.2 and earlier: -V)
                  Variable  Envelope  Return  Path. Given an envelope
                  sender address of the  form  owner-listname@origin,
                  each  recipient  user@domain  receives  mail with a
                  personalized envelope sender address.

                  By  default,  the  personalized   envelope   sender
                  address  is  owner-listname+user=domain@origin. The
                  default + and = characters  are  configurable  with
                  the  default_verp_delimiters  configuration parame-
                  ter.

           -XVxy (Postfix 2.2 and earlier: -Vxy)
                  As -XV, but uses x and  y  as  the  VERP  delimiter
                  characters,  instead  of  the  characters specified
                  with  the   default_verp_delimiters   configuration
                  parameter.

           -v     Send  an email report of the first delivery attempt
                  (Postfix versions 2.1  and  later).  Mail  delivery
                  always  happens in the background. When multiple -v
                  options  are  given,  enable  verbose  logging  for
                  debugging purposes.

           -X log_file (ignored)
                  Log  mailer  traffic.  Use  the debug_peer_list and
                  debug_peer_level configuration parameters  instead.

    SECURITY
           By  design,  this  program  is not set-user (or group) id.
           However, it must  handle  data  from  untrusted,  possibly
           remote,  users.   Thus,  the  usual precautions need to be
           taken against malicious inputs.

    DIAGNOSTICS
           Problems are logged to  syslogd(8)  and  to  the  standard
           error stream.

    ENVIRONMENT
           MAIL_CONFIG
                  Directory with Postfix configuration files.

           MAIL_VERBOSE (value does not matter)
                  Enable verbose logging for debugging purposes.

           MAIL_DEBUG (value does not matter)
                  Enable debugging with an external command, as spec-
                  ified  with  the   debugger_command   configuration
                  parameter.

           NAME   The  sender  full name. This is used only with mes-
                  sages that have no From: message header.  See  also
                  the -F option above.

    CONFIGURATION PARAMETERS
           The  following  main.cf parameters are especially relevant
           to this program.  The text below provides only a parameter
           summary.  See postconf(5) for more details including exam-
           ples.

    TROUBLE SHOOTING CONTROLS
           The DEBUG_README file gives examples  of  how  to  trouble
           shoot a Postfix system.

           debugger_command (empty)
                  The external command to execute when a Postfix dae-
                  mon program is invoked with the -D option.

           debug_peer_level (2)
                  The increment  in  verbose  logging  level  when  a
                  remote  client  or  server matches a pattern in the
                  debug_peer_list parameter.

           debug_peer_list (empty)
                  Optional list of remote client or  server  hostname
                  or  network address patterns that cause the verbose
                  logging level to increase by the  amount  specified
                  in $debug_peer_level.

    ACCESS CONTROLS
           Available in Postfix version 2.2 and later:

           authorized_flush_users (static:anyone)
                  List  of  users  who  are  authorized  to flush the
                  queue.

           authorized_mailq_users (static:anyone)
                  List of users who are authorized to view the queue.

           authorized_submit_users (static:anyone)
                  List  of  users  who  are authorized to submit mail
                  with the sendmail(1) command (and with  the  privi-
                  leged postdrop(1) helper command).

    RESOURCE AND RATE CONTROLS
           bounce_size_limit (50000)
                  The maximal amount of original message text that is
                  sent in a non-delivery notification.

           fork_attempts (5)
                  The maximal number of attempts to  fork()  a  child
                  process.

           fork_delay (1s)
                  The  delay  between  attempts  to  fork()  a  child
                  process.

           hopcount_limit (50)
                  The maximal number of  Received:   message  headers
                  that is allowed in the primary message headers.

           queue_run_delay (300s)
                  The  time between deferred queue scans by the queue
                  manager; prior to Postfix 2.4 the default value was
                  1000s.

    FAST FLUSH CONTROLS
           The ETRN_README file describes configuration and operation
           details for the Postfix "fast flush" service.

           fast_flush_domains ($relay_domains)
                  Optional list of destinations that are eligible for
                  per-destination  logfiles  with mail that is queued
                  to those destinations.

    VERP CONTROLS
           The VERP_README file describes configuration and operation
           details  of  Postfix  support for variable envelope return
           path addresses.

           default_verp_delimiters (+=)
                  The two default VERP delimiter characters.

           verp_delimiter_filter (-=+)
                  The characters Postfix accepts  as  VERP  delimiter
                  characters  on the Postfix sendmail(1) command line
                  and in SMTP commands.

    MISCELLANEOUS CONTROLS
           alias_database (see 'postconf -d' output)
                  The alias databases for local(8) delivery that  are
                  updated with "newaliases" or with "sendmail -bi".

           command_directory (see 'postconf -d' output)
                  The  location  of  all  postfix administrative com-
                  mands.

           config_directory (see 'postconf -d' output)
                  The default location of  the  Postfix  main.cf  and
                  master.cf configuration files.

           daemon_directory (see 'postconf -d' output)
                  The  directory  with  Postfix  support programs and
                  daemon programs.

           default_database_type (see 'postconf -d' output)
                  The default database type for use in newaliases(1),
                  postalias(1) and postmap(1) commands.

           delay_warning_time (0h)
                  The  time  after which the sender receives the mes-
                  sage headers of mail that is still queued.

           enable_errors_to (no)
                  Report mail delivery errors to the  address  speci-
                  fied   with  the  non-standard  Errors-To:  message
                  header, instead  of  the  envelope  sender  address
                  (this  feature is removed with Postfix version 2.2,
                  is turned off by default with Postfix version  2.1,
                  and  is  always  turned  on with older Postfix ver-
                  sions).

           mail_owner (postfix)
                  The UNIX system account that owns the Postfix queue
                  and most Postfix daemon processes.

           queue_directory (see 'postconf -d' output)
                  The  location of the Postfix top-level queue direc-
                  tory.

           remote_header_rewrite_domain (empty)
                  Don't rewrite message headers from  remote  clients
                  at all when this parameter is empty; otherwise, re-
                  write message  headers  and  append  the  specified
                  domain name to incomplete addresses.

           syslog_facility (mail)
                  The syslog facility of Postfix logging.

           syslog_name (postfix)
                  The  mail  system  name  that  is  prepended to the
                  process name in syslog  records,  so  that  "smtpd"
                  becomes, for example, "postfix/smtpd".

    FILES
           /var/spool/postfix, mail queue
           /etc/postfix, configuration files

    SEE ALSO
           pickup(8), mail pickup daemon
           qmgr(8), queue manager
           smtpd(8), SMTP server
           flush(8), fast flush service
           postsuper(1), queue maintenance
           postalias(1), create/update/query alias database
           postdrop(1), mail posting utility
           postfix(1), mail system control
           postqueue(1), mail queue control
           syslogd(8), system logging

    README_FILES
           DEBUG_README, Postfix debugging howto
           ETRN_README, Postfix ETRN howto
           VERP_README, Postfix VERP howto

    LICENSE
           The  Secure  Mailer  license must be distributed with this
           software.

    AUTHOR(S)
           Wietse Venema
           IBM T.J. Watson Research
           P.O. Box 704
           Yorktown Heights, NY 10598, USA

                                                                       SENDMAIL(1)