Docker

Netatalk comes with a Dockerfile and entry point script for running a
containerized AFP server and AppleTalk services.

Out of the box, exactly two users, and two shared volumes are supported in this
container. One of the shared volumes is a backup volume by default. If you need
a different setup, please use the manual configuration option.

Make sure you have a container runtime installed, then build the netatalk
container:

docker build -t netatalk:latest .

Alternatively, pull a pre-built Docker image from Docker Hub.

How to Run

Once you have the netatalk image on your machine run it with docker, podman or
equivalent container runtime.

The easiest way to enable full functionality including Zeroconf service
discovery and AppleTalk, is to use the host network driver.

For a hardened deployment, use the bridge network driver and expose port 548 for
AFP. However, Zeroconf service discovery may not work and you will have to
manually specify the IP address in the client when connecting to the file
server.

It is recommended to set up either a bind mount, or a Docker managed volume for
persistent storage. Without this, the shared volume be stored in volatile
storage that is lost upon container shutdown.

For Docker Compose, you can use the sample docker-compose.yml file that is
distributed with this source code.

Below follows a sample docker run command. Substitute /path/to/share with an
actual path on your file system with appropriate permissions, AFP_USER and
AFP_PASS with the appropriate user and password, and ATALKD_INTERFACE with the
network interface to use for AppleTalk.

You also need to set the timezone with TZ to the IANA time zone ID for your
location, in order to get the correct time synchronized with the Timelord time
server.

docker run --rm \
  --network host \
  --cap-add=NET_ADMIN \
  --volume "/path/to/share:/mnt/afpshare" \
  --volume "/path/to/backup:/mnt/afpbackup" \
  --volume "/var/run/dbus:/var/run/dbus" \
  --env AFP_USER= \
  --env AFP_PASS= \
  --env AFP_GROUP=afpusers \
  --env ATALKD_INTERFACE=eth0 \
  --env TZ=Europe/Stockholm \
  --name netatalk netatalk:latest

Constraints

The most straight forward way to enable Zeroconf service discovery as well as
the AppleTalk transport layer, is to use the host network driver and NET_ADMIN
capabilities.

Additionally, we rely on the host's D-Bus for Zeroconf, achieved with a bind
mount such as /var/run/dbus:/var/run/dbus. The left hand side of the bind mount
is the host machine, and the right hand side is the container. The host machine
path may have to be changed to match the location of D-Bus on the host machine.

On certain host OSes, notably Ubuntu: if the Apparmor security policy restricts
D-Bus messages, enable the unconfined security option.

Example for the docker compose yaml configuration file:

    security_opt:
      - apparmor=unconfined

See the Docker AppArmor security profiles documentation for further details.

The container is hard coded to output afpd (the Netatalk file server daemon)
logs to the container's stdout, with default log level info. Logs from the
AppleTalk daemons are sent to the syslog.

MySQL CNID Backend

The MySQL CNID backend is an alternative to the default Berkeley DB CNID backend
which offers better scalability.

Here follows a Docker Compose example to run a container network with MariaDB as
the database for the MySQL CNID backend, plus a web interface to administer the
database for good measure.

Set AFP_CNID_SQL_PASS and MARIADB_ROOT_PASSWORD to the same password.

services:
  netatalk:
    image: netatalk:latest
    networks:
      - afp_network
    ports:
      - "548:548"
    volumes:
      - afpshare:/mnt/afpshare
      - afpbackup:/mnt/afpbackup
      - /var/run/dbus:/var/run/dbus
    environment:
      - AFP_USER=atalk1
      - AFP_USER2=atalk2
      - AFP_PASS=
      - AFP_PASS2=
      - AFP_GROUP=afpusers
      - AFP_CNID_BACKEND=mysql
      - AFP_CNID_SQL_HOST=cnid_db
      - AFP_CNID_SQL_PASS=
    depends_on:
      - cnid_db

  cnid_db:
    image: mariadb:latest
    restart: always
    networks:
      - afp_network
    volumes:
      - cnid_db_data:/var/lib/mysql
    environment:
      - MARIADB_ROOT_PASSWORD=

  adminer:
    image: adminer:latest
    restart: always
    networks:
      - afp_network
    ports:
      - 8081:8080

volumes:
  afpshare:
  afpbackup:
  cnid_db_data:

networks:
  afp_network:
    driver: bridge

Webmin Module

Netatalk's Webmin module is distributed as a separate container image. The
module allows you to administer the Netatalk configuration via a web interface.
Here follows an example Docker Compose configuration to run the module in a
container.

Note that since the netatalk daemons run in a separate container, we cannot
control the services directly. Instead, activate polling of changes to the
afp.conf configuration file. Set AFP_CONFIG_POLLING to the number of seconds to
wait between polling attempts.

services:
  netatalk:
    image: netatalk:latest
    networks:
      - afp_network
    ports:
      - "548:548"
    volumes:
      - afpshare:/mnt/afpshare
      - afpbackup:/mnt/afpbackup
      - afpconf:/etc/netatalk
      - /var/run/dbus:/var/run/dbus
    environment:
      - AFP_USER=atalk1
      - AFP_USER2=atalk2
      - AFP_PASS=
      - AFP_PASS2=
      - AFP_GROUP=afpusers
      - AFP_CONFIG_POLLING=5
      - MANUAL_CONFIG=1

  webmin:
    image: netatalk_webmin_module:latest
    networks:
      - afp_network
    ports:
      - "10000:10000"
    volumes:
      - afpconf:/etc/netatalk
      - /var/run/docker.sock:/var/run/docker.sock
    environment:
      - WEBMIN_USER=admin
      - WEBMIN_PASS=
    depends_on:
      - netatalk

volumes:
  afpshare:
  afpbackup:
  afpconf:

networks:
  afp_network:
    driver: bridge

Printing

The CUPS administrative web app is running on port 631 in the container, which
is exposed to the host machine by default when using the host network driver.
This is used to configure CUPS compatible printers for printing from an old Mac
or Apple IIGS.

You may have to restart papd (or the entire container) after adding a CUPS
printer for it to be picked up as an AppleTalk printer.

Environment Variables

Mandatory

These are required to set the credentials used to authenticate with the file
server.

| Variable | Description |
| --- | --- |
| AFP_USER | Primary user of the shared volumes |
| AFP_PASS | Password to authenticate with the primary user |
| AFP_GROUP | Group that owns the shared volume dirs |

Mandatory for AppleTalk

| Variable | Description |
| --- | --- |
| ATALKD_INTERFACE | The network interface to use for AppleTalk |
| TZ | The timezone to use for the container; must be a IANA time zone ID |

Optional

| Variable | Description |
| --- | --- |
| AFP_UID | Specify user id of AFP_USER |
| AFP_GID | Specify group id of AFP_GROUP |
| AFP_USER2 | Username for the secondary user |
| AFP_PASS2 | Password for the secondary user |
| SERVER_NAME | The name of the server (AFP and Zeroconf) |
| SHARE_NAME | The name of the primary shared volume |
| SHARE2_NAME | The name of the secondary shared (Time Machine) volume |
| AFP_LOGLEVEL | The verbosity of logs; default is "info" |
| AFP_MIMIC_MODEL | Use a custom modern AFP icon, such as Tower or RackMount |
| AFP_LEGACY_ICON | Use a custom legacy AFP icon, such as daemon or sdcard |
| INSECURE_AUTH | When non-zero, enable the "ClearTxt" and "Guest" UAMs |
| DISABLE_TIMEMACHINE | When non-zero, the secondary shared volume is a regular
volume |
| DISABLE_SPOTLIGHT | When non-zero, Spotlight compatible indexing is disabled |
| MANUAL_CONFIG | When non-zero, enable manual management of config files |
| ATALKD_OPTIONS | A string with options to append to atalkd.conf |
| AFP_DROPBOX | Enable dropbox mode; turns secondary user into guest with read
only access to the second shared volume |
| AFP_EXTMAP | Enable filename extension to Classic Mac OS type/creator
mapping |
| AFP_CNID_BACKEND | The backend to use for the CNID database; valid values are
bdb and mysql |
| AFP_CNID_SQL_HOST | The hostname or IP address of the CNID SQL server |
| AFP_CNID_SQL_USER | The username to use when connecting to the CNID SQL
server |
| AFP_CNID_SQL_PASS | The password to use when connecting to the CNID SQL
server |
| AFP_CNID_SQL_DB | The name of the designated database in the SQL server |
