rygel.conf(5)

Name
rygel.conf - Configuration file for Rygel

SYNOPSIS

•   /etc/rygel.conf

•   $XDG_CONFIG_HOME/rygel.conf

DESCRIPTION
Rygel reads its configuration values from the file $XDG_CONFIG_HOME/rygel.conf or a file given on command line with the --config option. If that file does not exist, it uses the file /etc/rygel.conf. Most of the options may be overriden by commandline arguments or environment variables. See rygel(1) for details on those.

Lists in the configuration file are separated by a semicolon(;). Boolean values must be either the text true or the text false.

GENERAL DIRECTIVES

ipv6
    Set to false if you do not want Rygel to run on IPv6 addresses. Whether or not IPv6 is actually supported depends on how GUPnP was configured.

enable-transcoding
    Set to false if you want to disable transcoding of audio and video

video-upload-folder
    Where video files should be saved if allow-upload is true. It defaults to @VIDEOS@, which expands to the standard videos folder (typically ${HOME}/Videos)

music-upload-folder
    Where music files should be saved if allow-upload is true. It defaults to @MUSIC@, which expands to the standard videos folder (typically ${HOME}/Music)

picture-upload-folder
    Where picture files should be saved if allow-upload is true. It defaults to @PICTURES@, which expands to the standard videos folder (typically ${HOME}/Pictures)

media-engine
    Default media engine to load. If not specified, the engine folder is searched recursively and the first engine found is loaded.

interface
    List of network interfaces to attach rygel to. You can also use network IP or even ESSID for wireless networks on Linux. Leave it blank for dynamic configuration.

port
    Set the listen port for the HTTP server. 0 means to dynamically chose a port.

log-level
    Comma-separated list of domain:level pairs. This allows to specify log level thresholds infividually for different domains. Valid domains are "rygel" for anything not a plugin, "*" for everything or the name of a plugin.

    The available levels are 1 to 5, with 1 only logging critical errors and 5 being debug logging. All levels include messages of the levels below.

    To see log messages of level 5, it is also necessary to set the environment variable G_MESSAGES_DEBUG to all to get any output.

allow-upload
    Whether clients should be allowed to upload media files to the server.

allow-deletion
    Whether clients should be allowed to delete media files from the server.

force-downgrade-for
    Semicolon-separated list of device user agents (or parts thereof) that need a downgrade in the UPnP device versions.

    Warning: ONLY change this setting when told to do so or when you know what you are doing If you find that adding your device makes it working with Rygel, please file an issue at <https://gitlab.gnome.org/GNOME/rygel/issues/new/?issuable_template=IOP> so we can include it in future releases.

acl-fallback-policy
    Access control fall-back policy if no access control provider could be found. The default value is true, which will allow any peer to access everything.

strict-dlna
    If set to true, Rygel will disable various features that improve compatibility with many clients, but break standard conformance.

DATABASE SETTINGS
Generic options for the database support library

debug
    Set to true for extended SQL output

GSTREAMER MEDIA ENGINE
These settings are specific for the GStreamer Media Engine. This is the default engine, refer to the media-engine setting. The following options are available

transcoders
    A semicolon-separated list of active transcoders. This setting has no effect if enable-transcoding is set to false.

    Possible values are lpcm,mp3,mp2ts,aac,avc or wmv.

PLUGIN-SPECIFIC SETTINGS
Sections for plugins are denoted with [PluginName] and can contain options specific to a plugin, or any of these common options

title
    Title of the device implemented by this plugin.

    There are some variables which will be replaced by rygel. @REALNAME@ will be substituted by the user's real name, @USERNAME@ by the user's login name, @HOSTNAME@ by the name of the machine rygel runs on, and @PRETTY_HOSTNAME@ the system description from /etc/machine-info if available, otherwise it's equivalent to @HOSTNAME@.

enabled
    You can individually enable or disable plugions by setting this to true or false

uuid
    Instead of having a plugin generate an UUID on its own, it is possible to pass a fixed UUID through the configuration. Format is a plain UUID, NOT an UDN.

energy-management
    Set to true if you would like the UPnP device to contain an EnergyManagement service. Note that additional settings are required then, see the section on EnergyManagement below.

SECTION RENDERER
Generic options for the renderer framework, independent of the back-end

image-timeout
    Default showtime in seconds to use for images in playlists if dlna:lifetime is not set. DLNA wants something between 5 and 15 seconds.

SECTION LOCALSEARCH
The LocalSearch plugin uses the centralized database of meta information from the LocalSearch project, using the TinySparql library. See <https://tracker.gnome.org> for more information.

only-export-from
    Restrict the exported media items to files that are located in any of the folders listed. This setting supports the usual @ patterns for path substitution.

share-pictures
    Enable or disable sharing of all pictures found in the LocalSearch database, filtered for the list of folders in only-export-from.

share-videos
    Enable or disable sharing of all videos found in the LocalSearch database, filtered for the list of folders in only-export-from.

share-music
    Enable or disable sharing of all music found in the LocalSearch database, filtered for the list of folders in only-export-from.

strict-sharing
    When enabled, only files that have a DLNA profile (nmm:dlnaProfile) will be exported. Improves compatibility with the DLNA standard, but potentially filters out a lot of media files.

SECTION MEDIAEXPORT
The MediaExport plugin is an alternative to the localsearch-backed media export. It extracts meta-data by itself and stores it in a SQLite database under $XDG_CACHE_HOME/rygel/media-export.db.

%%Note: If both plugins, LocalSearch as well as MediaExport, are enabled, MediaExport will disable itself in favour of the LocalSearch plugin.

uris
    A list of if URIs to expose via UPnP. It may be files, folder or anything supported by GVFS. If left empty it defaults to export the user's music, video and picture folders as defined by the XDG special user directories spec. These default folders can be referenced by @MUSIC@, @PICTURES@ and @VIDEOS@. Locations can be entered as either fully escaped URIs or normal paths.

    An example for uris could be uris=@MUSIC@;/home/user/My Pictures;file:///home/user/My%20Videos

    Note: If you enter a normal path that contains whitespace, there is no need to escape them with either a backslash or putting the string in quotes.

    Note: It is strongly advised against using an exported folder as a target for downloads when extract-metadata is enabled. Rygel will most likely ignore the files then because they will fail to extract while the download is ongoing.

extract-metadata
    Whether MediaExport should query and store meta-data from the media files

monitor-changes
    Whether MediaExport should monitor the locations given in uris for modifications

monitor-grace-timeout
    How long MediaExport should wait to start meta-data extraction after it has been notified about a file change

virtual-folders
    Whether MediaExport should show generated folders based off of file meta-data

SECTION PLAYBIN
Playbin is a default implementation of a DLNA Media Renderer, using GStreamer. It allows minimal customisation of the sinks used in the renderer. For example, to configure an audio-only renderer, set "audio-sink" to "autoaudiosink" and "video-sink" to "fakesink".

audio-sink
    Override the default audiosink for the playbin used in the renderer

video-sink
    Override the default videosink for the playbin in the renderer

SECTION GSTLAUNCH
The GstLaunch plugin allows to export GStreamer Pipelines using the syntax from the gst-launch commandline utility. It is able to export more than one pipeline. You have to omit the sink which is provided by Rygel.

Available items have to be declared using the "launch-items" setting. Each pipeline then needs to be configured for the three values of "launch", "mime" and "title", and optionally for "dlnaprofile". For example, given the setting of launuch-items=audio;video it is necessary to also define triplets of audio-title, audio-mime, audio-launch and video- title, video-mime and video-launch.

SECTION MPRIS
MPRIS allows you to turn any media player that implements MPRIS control into a DLNA/UPnP renderer by converting UPnP calls to MPRIS and vice-versa. If you want to disable MPRIS integration for some players, e.g. if they do not support setting the URL through MPRIS, you can add a section with the name of the MPRIS endpoint as shown in Rygel's log and set enable to false

SECTION ORG.MPRIS.MEDIAPLAYER2.IO.BASSI.AMBEROL
Example of disabling a specific player for MPRIS integration

SECTION EXTERNAL
Similar to MPRIS the External plugin allows applications that expose the MediaServer2 D-Bus specification converted into a DLNA server.