# x3270 Resources

Here is a complete list of the customizable X11 resources used by x3270, their meanings, default values, command-line switches and menu options that change them.

Note that any resource can be set on the command line with the -xrm switch.

    x3270.activeIcon	Default false		Switch -activeicon
        This one is a lot of fun.  When set to true, x3270's icon becomes a live
        miniature of the screen display.  There are some limitations, spelled out
        in the man page.

    x3270.allowResize	Default true
        When true, the x3270 window can be resized by the mouse (actually, by the
        window manager).  When false, the window can only be resized from menu
        options.  The purpose of disabling mouse resizing is to allow a window
        bigger than will fit on the screen, which some window managers (e.g., mwm)
        will not allow if permitted to resize it.

    x3270.altCursor		Default false		Switch -set altCursor
    			Option Underline Cursor	       -clear altCursor
    			       Block Cursor
        When set to true, this causes x3270 to use with the alternate (underscore)
        cursor.

    x3270.aplFont		Default	3270-apl
        The font used when in apl mode (when the -apl switch is used).  It is
        assumed that this is a 3270 font (one with the same ordering as 3270 and
        3270-12), but with special APL characters in place of accented (ISO
        Latin-1) characters.

    x3270.background	Default white		Switches: -bg, -rv
        The background color for menus, buttons, and on monochrome X displays, the
        emulator window.

    x3270.bellVolume	Default 0
        Controls the volume used when ringing the terminal bell.  The value
        ranges from -100 (silent) through 0 (normal) to +100 (loud).  Not all
        X servers can vary the bell volume, other than turning it on and off.
        This resource can be overridden by the x3270.visualBell resource, which
        if set to true, will replace the bell with a flash of the screen.

    x3270.boldColor		Default cyan
        On color X displays in 3278 (pseudo-color) mode, this is the color of
        high-intensity text.  (See the description of boldFont for how it works on
        monochrome X displays.)

    x3270.blankFill		Default false		Option Blank Fill
    			Switch -set blankFill
    			       -clear blankFill
        When set to true, in 3270 mode x3270 will automatically convert trailing
        blanks in a field to nulls in order to insert a character, and will
        automatically convert leading nulls to blanks so that input data is not
        squeezed to the left.  This eliminates some of the quirkier behavior of
        real 3270 terminals.

    x3270.bsdTm		Default false
        Defines x3270's response to the TELNET DO TIMING MARK option.  When set
        to false (the default), x3270 will respond to DO TIMING MARK with WONT
        TIMING MARK, which is consistent with most modern TELNET clients.  When
        set to true, x3270 will respond with WILL TIMING MARK, which is consistent
        with the old BSD 'telnet' program and with previous versions of x3270.
        In either case, x3270 will not respond to a DONT TIMING MARK option.

    x3270.charset		Default bracket		Switch -charset
        This defines the host EBCDIC character set, that is, what glyph (image) is
        displayed for each EBCDIC code sent by the host.

        For each host character set x, an additional resource by the name of
        charset.x must be defined.  Optionally, resources by the name of
        codepage.x and displayCharset.x may be defined.

    x3270.charset.us-intl
    x3270.charset.us
    x3270.charset.apl
    x3270.charset.bracket
    x3270.charset.oldibm
    x3270.charset.german
    x3270.charset.finnish
    x3270.charset.uk
    x3270.charset.norwegian
    x3270.charset.french
    x3270.charset.hebrew
        Individual host character set definitions.  These resources take one of two
        forms: a set of exceptions (differences from the U.S. English host
        character set), or a full EBCDIC-to-display-code translation table.

        If the first token in the resouce is "#table", then it is interpreted as
        a full table.  It must consist of 256 whitespace-separated values, each
        giving the display code for the corresponding EBCDIC code.

        If the first token is not "#table", then it is interpreted as a series
        of newline-separated strings that define how an EBCDIC national character
        set differs from IBM's standard U.S. English set (codepage 37).  Each
        string is a number, a colon, and a symbol.  The number is the EBCDIC code
        in decimal, and the symbol is a single character, the ISO Latin-1 name of
        the graphic it represents, or a hexadecimal number in the form 0xnn.

        In either style of definition, the display code can be preceded by an
        asterisk "*" to indicate a one-way translation.  One-way translations
        are used when multiple EBCDIC codes are displayed with the same display
        code.  The entry without the asterisk is used to define how that one
        display code is translated back to EBCDIC.

    x3270.charsetList	Default U.S. International: us-intl
    				Bracket: bracket
    				German: german
    				Finnish: finnish
    				United Kingdom: uk
    				Norwegian: norwegian
    				French: french
    				Hebrew: hebrew
        Defines the "Character Set" pull-right menu.  Can contain '>' characters
        to define a menu hierarchy.

    x3270.codepage.hostCharset	Default 37
        Code page definitions for various host character sets.  If x3270.charset is
        x, then x3270.codepage.x defines the IBM code page reported to the
        host in a Query Reply.  The default code page is 37.  The base character
        set and the code page are combined into a CGCSGID reported to the host.  If
        the value of x3270.codepage.x is a 16-bit number (less than 65536), then
        the code page is combined with the default base character set of 697 to
        form the CGCSGID.  If the value of x3270.codepage.x is greater than 16
        bits, then it specifies the entire CGCSGID reported to the host.

    x3270.color8		Default False
        If set to True, x3270 will respond to a Query(Color) with a list of 8
        supported colors.  If set to False (the default), it will send a list
        of 16 colors.  The 8-color setting is required for some hosts which
        abort a session if 16 colors are reported.

    x3270.colorBackground	Default black
        The background color for the emulator window.  This resource is used only
        on color X displays when the x3270.model specifies 3278 (pseudo-color)
        mode.  On monochrome X displays, the background color is white, unless -rv
        (reverse video) is selected on the command line; in 3279 mode, the screen
        background is determined by the x3270.colorScheme resource.

    x3270.colorScheme	Default default
    			Options Default 3279: default
    				Bright: bright
    				Reverse: reverse
    				Green Screen: greenScreen
        Defines the colors used to paint the emulator window in 3279 (full-color)
        mode.  This resource is used only when the "x3270.model" specifies a 3279
        display.  For each color scheme x, an additional resources by the name of
        colorScheme.x must be defined.

    x3270.colorScheme.default
    x3270.colorScheme.reverse
    x3270.colorScheme.bright
    x3270.colorScheme.cpe
    x3270.colorScheme.greenScreen
        Individual color scheme definitions.  Each resource is a list of 23 items:
         0  X color to use for IBM "neutral/black" (also used as ANSI color 0)
         1	X color to use for IBM "blue" (also used for ANSI color 4)
         2	X color to use for IBM "red" (also used for ANSI color 1)
         3	X color to use for IBM "pink" (also used for ANSI color 5)
         4	X color to use for IBM "green" (also used for ANSI color 2)
         5	X color to use for IBM "turquiose"
         6	X color to use for IBM "yellow" (also used for ANSI color 3)
         7	X color to use for IBM "neutral/white"
         8	X color to use for IBM "black"
         9	X color to use for IBM "deep blue"
         10	X color to use for IBM "orange"
         11	X color to use for IBM "purple"
         12	X color to use for IBM "pale green"
         13	X color to use for IBM "pale turquiose" (also used for ANSI color 6)
         14	X color to use for IBM "grey"
         15	X color to use for IBM "white" (also used for ANSI color 7)
         16 X color to use if one of 0..15 cannot be allocated (white or black)
         17 X color to use as the default screen background
         18 X color to use as the select background
         19 IBM color index (0..15) to use for unprotected, unhighlighted fields
         20 IBM color index (0..15) to use for unprotected, highlighted fields
         21 IBM color index (0..15) to use for protected, unhighlighted fields
         22 IBM color index (0..15) to use for protected, highlighted fields

    x3270.composeMap	Default latin1
        Gives the name of the map used to define the pairs of characters that
        form composite characters with the Compose key.

    x3270.composeMap.latin1
    x3270.composeMap.apl
        For each compose map x, an additional resource by the name of
        composeMap.x must be defined.  Each line in the resource is of the form
        "keysym1 + keysym2 = keysym3", meaning "when the Compose key is pressed,
        followed by keysym1 and keysym2 (in either order), interpret it as
        keysym3."  The definitions are case-sensitive.

    x3270.connectFileName	Default ~/.x3270connect
        Gives the name of the file to consult and store the recently-connected
        host list in.  If given the value "none", no file will be read or
        written.  Note that by default, this file is shared among all instances
        of x3270 that run under the same username.

    x3270.crosshair		Default false		Switch -set crosshair
    						       -clear crosshair
        When set to true, causes x3270 to display a crosshair over the cursor:
        lines extending with height and width of the screen.

    x3270.cursorBlink	Default false		Switch -set cursorBlink
    						       -clear cursorBlink
        When set to true, this causes x3270 to use a blinking cursor.

    x3270.cursorColor	Default red
        On color X displays, this is the color of the text cursor.  This resource
        is used only if the x3270.useCursorColor resource is set to true.

    x3270.cursorPos		Default true		Switch -set cursorPos
    			Option Track Cursor	       -clear cursorPos
        When set to true, causes x3270 to display the cursor location on the
        status line.

    x3270.debugFont		Default 3270d
        The name of the font recognized as the "debug" font.  (When x3270 thinks
        it is using a debug font, it uses a different, slower method to draw the
        screen.)  It is assumed that this is a 3270 font (one with the same
        ordering as 3270 and 3270-12), but with printable graphics in place of
        the NULL and field attribute characters, which are normally blank.

        Usually, the "Debug Font" menu option selects this font.

    x3270.debugTracing	Default true
        If set to true, options are available on the File menu to trace the 3270
        data stream and X events.  If set to false, these options are not
        displayed.

    x3270.disconnectClear	Default false
        If set to true, x3270 will clear the screen when a host disconnects.

    x3270.displayCharset.hostCharset	Default iso8859-1
        Defines the display character set that the x3270.emulatorFont must
        implement, in order for x3270 to display all characters that the host can
        generate.  If x3270.charset is x, then x3270.displayCharset.x defines
        the display character set.  If the x3270.emulatorFont does not implement
        the specified display character set, x3270 will try to use a different
        font, and if none is available, will reject the host character set
        definition.

    x3270.doConfirms	Default true
        When set to true, x3270 will display a pop-up to report successful
        completion of certain operations, such as screen printing.  When
        set to false, these pop-ups are not displayed.

    x3270.dsTrace		Default false		 Switch -trace
    			Option Trace Data Stream        -set dsTrace
    							-clear Trace
        When true, x3270 writes a hexadecimal representation of all network
        traffic, and its interpretation, into a file, which defaults to
        /tmp/x3trc.<pid>.  It also pops up a window to watch the file as it
        is created, with the pathname of the file as the window title.  The
        command run in the window is defined by the traceCommand resource.  The
        directory prefix is defined by the traceDir resource.  If the traceFile
        resource is defined, it explicitly defines the file name and traceDir
        is ignored.

    x3270.emulatorFont	Default 3270 (*)	Switch -efont
    			Options 3270 Font (14 point): 3270
    				8-point Font: 3270gt8
    				12-point Font: 3270-12
    				16-point Font: 3270gt16
    				20-point Font: 3270-20
    				24-point Font: 3270gt24
    				32-point Font: 3270gt32
    				Debug Font: 3270d
    			        Other Font...
        The font used for the emulator window.  By default it is 3270, a 14-pixel
        clone of a real 3278 display font.  A nice substitution is 3270-12, which
        is a little more compact.  Actually, x3270 can use any X font, so long as
        it uses constant spacing.  However, only 3270 and 3270-12 allow displaying
        all special symbols on the status line.

        (*) Actually, the default for emulatorFont is the value of the first font
        in the x3270.emulatorFontList.displayCharset resource, below.

    x3270.emulatorFontList.displayCharset	Default: 3270 Font (14 point): #resize 3270
    				 8-point Font: #resize 3270gt8
    				 12-point Font: #resize 3270-12
    				 16-point Font: #resize 3270gt16
    				 20-point Font: #resize 3270-20
    				 24-point Font: #resize 3270gt24
    				 32-point Font: #resize 3270gt32
    				 Debug Font: #noauto 3270d
        A list of known fonts for a given displayCharset.  Each line describes
        a font.  The list serves two purposes: it is presented as the Font menu
        when the displayCharset is selected, and it is searched when that
        displayCharset is selected for use.

        On each line, if there is text separated by a ":", that text appears as the
        menu label.  Otherwise, the font name is displayed.  If the keyword
        #noauto appears before the font name, the font will not be a
        candidate for automatic selection when the displayCharset is selected.
        If the keyword #resize appears before the font name, the font will
        be used to change the screen size in response to Window Manager requests.
        Finally, a font name may be preceded by a "!" to override character set
        checking, in case the font's properties have been improperly defined.

        Each emulatorFontList is implicitly followed by two entries:
    	*-r-*-c-*-displayCharset
    	*-r-*-m-*-displayCharset
        (Actually, each of those two entries will be expanded for each of the
        components in the displayCharset).  This will find any
        constant-spaced fonts implementing that display character set.

        An emulatorFontList resource can contain '>' characters to indicate a menu
        hierarchy.  For example, an definition like this:
            GoodFonts>8-point Font: 3278gt8
    	GoodFonts>12-point Font: 3270-12
    	BadFonts>16-point Font: 3270gt16
    	BadFonts>24-point Font: 3270gt24
        will result in a two-level menu hierarchy.  The first level will have two
        items, GoodFonts and BadFonts.  Each will have a pull-right with two
        entries.

    x3270.eof		Default ^D
        Used in ANSI mode, when communicating in line-at-a-time mode (when x3270
        gathers a line of input before forwarding it to the host).  Defines a
        special character used for editing input, and has exactly the same
        function as the "stty" parameter of the same name.

    x3270.erase		Default ^?
        Used in ANSI mode, when communicating in line-at-a-time mode (when x3270
        gathers a line of input before forwarding it to the host).  Defines a
        special characters used for editing input, and has exactly the same
        functions as the "stty" parameters of the same name.

        When connected in ANSI character-at-a-time mode (when x3270 sends each
        keystroke to the host), this is the ASCII character that is sent to
        the host in response to the Erase action.

    x3270.eventTrace	Default false		 Switch -set eventTrace
    			Option Trace X Events           -clear eventTrace
        When true, x3270 traces information about the X events that it processes
        into a file, which defaults to /tmp/x3trc.<pid>.  It also pops up a
        window to watch the file as it is created, with the pathname of the file
        as the window title.  The command run in the window is defined by the
        traceCommand resource.  The directory prefix is defined by the traceDir
        resource.   If the traceFile resource is defined, it explicitly defines
        the file name and traceDir is ignored.

    x3270.extended		Default false		Switch -extended
        *** DEPRECATED RESOURCE -- REPLACED BY NEW x3270.model SYNTAX ***
        If set to true, enables support of the 3270 Extended Data Stream, which
        allows extended highlighting, structured fields, and query reply.  The
        actual difference is that a "-E" is appended to the default terminal
        name which is passed to the host through TELNET negotiations, indicating
        support for the feature.  If the x3270.m3279 resource is true,
        x3270.extended is automatically assumed to be true as well.

    x3270.fixedSize
        If set to a value widthxheight, specifies a fixed size
        for the x3270 display.  The 3270 emulator will float in the center of the
        window, if need be.

    x3270.ftCommand		Default ind$file
        Defines the host command used to transfer files.

    x3270.foreground	Default black		Switches: -fg, -rv
        The foreground color for menus, buttons, and on monochrome X displays, the
        emulator display.

    x3270.highlightBold	Default False
        If true, then highlighted fields are displayed in bold.  If false, then
        highlighted fields are displayed in the usual font.

    x3270.hostsFile		Default /usr/lib/X11/x3270/ibm_hosts
        The name of a file listing the host names that appear on the "Connect"
        pull-down menu.  The format of the file is explained on the ibm_hosts man
        page.

    x3270.iconFont		Default nil2
        The font used to paint the text inside the active icon.  "nil2" is a
        one-by-two pixel font that produces a "greeked" picture of the screen
        image.

    x3270.iconLabelFont 	Default 8x13
        When activeIcon and labelIcon are true, this is the name of the font used
        to paint the icon label.

    x3270.icrnl		Default true
        Used in ANSI mode; similar to the "stty" parameter of the same name.
        Controls whether input carriage returns are mapped to newlines.

    x3270.idleCommand
    x3270.idleCommandEnabled	Default false
    x3270.idleTimeout	Default ~7m
        When idleCommand is defined, it specifies a command to execute after a
        period of keyboard inactivity (no AID keys pressed).  idleCommand can be
        an arbitrary sequence of x3270 actions, but it should include an action
        which generates an AID (PF(), PA(), Clear() or Enter()).
        idleCommandEnabled must be set to "true" in order for the idleCommand to
        take effect.  idleTimeout specifies the inactivity interval.  If it begins
        with a tilde ("~"), the time will be randomly varied +/-10% from the value
        specified.  If the values ends in 'h', it specifies hours; if it ends in
        'm' is specifies minutes; if it ends in 's' or does not have an
        alphanumeric suffix, it specifies seconds.

    x3270.inlcr		Default false
        Used in ANSI mode; similar to the "stty" parameter of the same name.
        Controls whether input newlines are mapped to carriage returns.

    x3270.inputColor	Default orange
        On color X displays in 3278 (pseudo-color) mode, this is the color of
        light-pen selectable fields.  If the resource x3270.modifiedSel is set to
        true, modified fields are also displayed in this color.  On monochrome X
        displays, these fields are indistinguishable from other normal-intensity
        text.

    x3270.inputMethod	No Default		Switch -im
        Specifies the name of the input method to use for multi-byte input.  The
        default is specified by the XMODIFIERS environment variable, if set, or is
        constructed by Xlib based on the current locale.

        Supported only when x3270 is compiled with DBCS support.

    x3270.intr		Default ^C
        Used in ANSI mode, when communicating in line-at-a-time mode (when x3270
        gathers a line of input before forwarding it to the host).  Defines a
        special character used for editing input, and has exactly the same
        function as the "stty" parameter of the same name.

    x3270.invertKeypadShift	Default false
        When set to true, this causes the PF1-PF12 and PF13-PF24 keys on the
        pop-up keypad to be swapped.  Normally, the low-numbered keys appear;
        when Shift, Alt, Ctrl or Meta is pressed, the high-numbered keys appear.
        With this resource set to true, that is reversed.

    x3270.keymap		No Default		Switch -keymap
        The name of the keyboard map to use.  If no keymap resource is specified,
        the environment variables KEYMAP and KEYBD are checked (in that order) for
        the keymap name.

        For each keymap x, an additional resource by the name x3270.keymap.x
        must be defined, which gives the actual key mappings.  These are in X
        translation table format.

        The name may be followed by any number of comma-separated modifier names,
        e.g., if the keymap name "sun-k4,ow", means keymap "sun-k4" and modifier
        "ow".

        For each keymap modifier x, an additional resource by the name
        x3270.keymap.x must be defined, which gives the actual key mappings.
        These are also in X translation table format.

    x3270.keymap.sun-k5
    x3270.keymap.sun-k4
    x3270.keymap.sun-k3
    x3270.keymap.ncd
    x3270.keymap.hp-k1
    x3270.keymap.hp-pc
        These are predefined keymaps.

    x3270.keymap.ow
    x3270.keymap.apl
    x3270.keymap.alt
    x3270.keymap.t
    x3270.keymap.finnish7
    x3270.keymap.norwegian7
        These are predefined keymap modifiers:
        - "ow" makes the mouse work more like OpenWindows defaults
        - "apl" is automatically applied when in apl mode (the -apl switch is used)
        - "alt" maps many of the "Meta" key actions to "Alt" key actions, for
    	keyboards which lack a "Meta" key
        - "t" is useful for keymap debugging; it maps Meta-z to an action that
    	displays the current keymap
        - "finnish7" and "norwegian7" are for compatibility with certain 7-bit
    	international keyboards

    x3270.keypad		Default right
        This controls the position of the pop-up keypad.  It can have one of
        five values: left, meaning a pop-up window positioned to the left of the
        main x3270 window; right, meaning a pop-up window positioned to the right
        of the main x3270 window; bottom, meaning a pop-up window positioned below
        the main x3270 window; integral, making the keypad an extension of the
        bottom of the main window itself, and insideRight, placing the keypad
        over the upper-right corner of the emulator window, just below the keypad
        button on the menu bar.

    x3270.keypad.keyHeight	Default 24
        The height in pixels of all of the buttons on the keypad.

    x3270.keypad.keyWidth	Default 48
        The width in pixels of the lower tier of buttons on a horizontal keypad.

    x3270.keypad.largeKeyWidth	Default 56
        The width in pixels of the lower tier of buttons on a vertical keypad.

    x3270.keypad.paWidth	Default 36
        The width in pixels of PA and cursor keys on the keypad.

    x3270.keypad.pfWidth	Default 32
        The width in pixels of PF keys on the keypad.

    x3270.keypadBackground	Default grey70
        On color X displays, this is the color of the empty area behind the buttons
        on the main window and keypad window.  On monochrome X displays, these
        areas are filled with a 50% grey bitmap.

    x3270.keypadOn		Default false
        If set to true, the keypad will automatically appear when x3270 is started.

    x3270.kill		Default ^U
        Used in ANSI mode, when communicating in line-at-a-time mode (when x3270
        gathers a line of input before forwarding it to the host).  Defines a
        special characters used for editing input, and has exactly the same
        functions as the "stty" parameter of the same name.

        When connected in ANSI character-at-a-time mode (when x3270 sends each
        keystroke to the host), this is the ASCII characters that is sent to
        the host in response to the DeleteField action.

    x3270.labelIcon		Default false
        When activeIcon is true, MIT's twm window manager will not put a label on
        x3270's icon.  Setting labelIcon to true causes x3270 to supply its own
        label for the icon.

    x3270.lineWrap		Default true		Switch -set lineWrap
    			Option Wraparound	       -clear lineWrap
        When set to true, in ANSI mode x3270 will automatically insert a
        Newline then output reaches the end of a line.  When false, output can
        pile up at the end of each line.

    x3270.lnext		Default ^V
        Used in ANSI mode, when communicating in line-at-a-time mode (when x3270
        gathers a line of input before forwarding it to the host).  Defines a
        special character used for editing input, and has exactly the same
        function as the "stty" parameter of the same name.

    x3270.lockedCursor	Default X_cursor
        The name of the mouse cursor displayed with x3270 is not connected to a
        host.

    x3270.m3279		Default false		Switch -color
        *** DEPRECATED RESOURCE -- REPLACED BY NEW x3270.model SYNTAX ***
        If true and running on a color X display, x3270 runs in full 3279 color
        mode.  If false, x3270 runs in 3278 (pseudo-color) mode, with colors
        representing different field attributes.

    x3270.macros
    x3270.macros.host1
    x3270.macros.host2
        Defines a set of macros assigned to a pull-down menu that appears when
        connected to a host.  The syntax is similar to a keymap (an X11 translation
        table), except that rather than a keysym name, the left-hand side is a
        name that will appear on the menu.  Any single action can be specified
        on the right-hand side.

        Definitions of the form "x3270.macros.<xxx>" define the macros menu when
        connected to host <xxx>, which override the "x3270.macros" definitions.

    x3270.marginedPaste	Default false		Switch -set marginedPaste
    			Option Paste With Left Margin  -clear marginedPaste
        When set to true, x3270 will use the current cursor position as a left
        margin for pasted data: no pasted data will be input into an area to the
        left of the current cursor positon.

    x3270.menuBar		Default true
        If set to false, the menu bar will not be displayed at the top of the
        x3270 main window.  The three pull-down menus are still available, however,
        by pressing Ctrl and each of the mouse buttons.

    x3270.model		Default 3278-4-E (mono)	Switch -model
    				3279-4-E (color)
    			Options Model 2
    			        Model 3
    			        Model 4
    			        Model 5
        The terminal model that x3270 is emulating.  The model is in three parts,
        separated by dashes; each part is optional.
    	3278 or 3279
    	    "3278" specifies a monochrome 3270 display.  If used on a color
    	     X display, it will cause fields to be drawn in pseudo-color
    	     (different colors for different field attributes).  This is
    	     the default for monochrome X displays.
    	    "3279" specifies a color 3270 display.  This is the default for
    	     color X displays.
    	2, 3, 4 or 5
    	    The model number, which determines the size of the screen.  The
    	     default is 4.
    	E
    	    An optional suffix which specifies support for the 3270 Extended
    	     Data Stream (color, extended attributes, query reply).  3279
    	     implies E.

    x3270.modifiedSel       Default false
        When set to true, modified fields are displayed in a different color than
        other modifiable fields.  In 3278 mode, this color is the "input" (light
        pen selectable) color, defined by the x3270.inputColor resource.  In 3279
        mode, this is the color whose index is defined by the
        x3270.modifiedSelColor resource.  When x3270.modifiedSel is set to false,
        modified fields are displayed in the same colors as unmodified fields.

    x3270.modifiedSelColor	Default 10
        In 3279 mode, when the x3270.modifiedSel resource is set to true, this
        is the index of the color used to display modified fields.  The value is
        not an X color name or specification; rather it is a 3279 color index,
        as documented under the x3270.colorScheme resource.  The default value
        is 10, which corresponds to "orange".

    x3270.mono		Default false		Switch -mono
        If set to true, x3270 will operate as if it were running on a monochrome X
        display.

    x3270.monoCase		Default false		Switch -set monoCase
    			Option Monocase		       -clear monoCase
        When true, causes x3270 to run in uppercase-only mode.

    x3270.noOther		Default false
        If set to true, the "Other" options are disabled for selecting fonts
        and connecting to hosts, limiting users to the options provided on
        the menus.

    x3270.numericLock	Default false
        When true, causes x3270 to lock the keyboard when non-numeric data is
        entered into fields with the Numeric attribute.

    x3270.normalColor	Default green
        On color X displays in 3278 (pseudo-color) mode, this is the color of
        normal-intensity text.  On monochrome X displays, normal text uses the
        foreground color.

    x3270.onlcr		Default true
        Used in ANSI line mode; similar to the "stty" parameter of the same name.
        Controls whether output newlines are mapped to CR/LF sequences.

    x3270.oerrLock		Default true
        If set to true, operator errors (typing into protected fields, insert
        overflow, etc.) will cause the keyboard to lock with an error message
        on the status line.  If set to false, the terminal bell will ring,
        without any keyboard lock or message.

    x3270.once		Default false		Switch -once
        When true, x3270 will exit as soon as a host disconnects.

    x3270.oversize					Switch -oversize
        Sets the screen dimensions to be larger than the default for the
        chosen model.  Its value is a string in the format "COLSxROWS".  It is
        used only if the value of "x3270.model" includes a "-E" (extended
        data stream) suffix, and if the specified dimensions are larger than
        the model number defaults.  Also, only hosts that support the Query Reply
        structured field will function properly with x3270 in this mode.

    x3270.port		Default telnet		Switch -port
        The name of the default TCP port for x3270 to connect to.  This can be
        either a symbolic name from /etc/services, or an integer.

    x3270.preeditType	Default OverTheSpot+1	Switch -pt
        The preedit type for the multi-byte input method.  Valid values are
        "OverTheSpot", "OffTheSpot", "Root" and "OnTheSpot".  The value for
        "OverTheSpot" can include an optional suffix, a signed number indicating
        the vertical distance in rows of the preedit window from the cursor
        position, e.g.  "OverTheSpot+1" or "OverTheSpot-2".

        Supported  only when x3270 is compiled with DBCS support.

    x3270.printerLu					Switch -printerlu
        If a value is set, x3270 will automatically start a pr3287 printer session
        when a host is connected to.  If the value is ".", the pr3287 session will
        be associated with the interactive terminal session (this requires that
        the host support TN3270E).  Otherwise, the value is assumed to be the LU
        name to associate with the printer session.

    x3270.printer.assocCommandLine
    			Default pr3287 -assoc %L% -command %C% %R% %H%
        The shell command to use to start a printer session, associated with the
        current TN3270E session LU.  Within the string, the following substitutions
        are made:
    	%L% is replaced with the current session's LU
    	%C% is replaced with the value of the x3270.printer.command resource
    	%H% is replaced with the current host name
    	%R% is replaced with an option to pass the current character set
    	 definition (-charset @/tmp/cs)

    x3270.printer.command	Default lpr
        The name of the command supplied to the "-command" option of the pr3287
        program to print each job.  This is the text which is substituted for
        "%C" in the x3270.printer.assocCommandLine and x3270.printer.luCommandLine
        resources.

    x3270.printer.luCommandLine
    			Default pr3287 -command %C% %R% %L%@%H%
        The shell command to use to start a printer session, associated with a
        specific LU.  Within the string, the following substitutions are made:
    	%L% is replaced with the LU value entered into the dialog box
    	%C% is replaced with the value of the x3270.printer.command resource
    	%H% is replaced with the current host name
    	%R% is replaced with an option to pass the current character set
    	 definition (-charset @/tmp/cs)

    x3270.printTextCommand	Default lpr
        The shell command used by the PrintText action.  An ASCII image of the
        3270 display becomes the standard input to this command.  If the first
        character of the command is '@', the usual pop-up windows before and after
        the text is printed will not appear.

    x3270.printWindowCommand	Default xwd -id %d | xpr | lpr
        The shell command used by the PrintWindow action.  The X window identifier
        of the main x3270 window is substituted for any "%d" in the command.  If
        the first character of the command is '@', the usual pop-up windows before
        and after the window is printed will not appear.

    x3270.quit		Default ^\\
        Used in ANSI mode, when communicating in line-at-a-time mode (when x3270
        gathers a line of input before forwarding it to the host).  Defines a
        special character used for editing input, and has exactly the same
        function as the "stty" parameter of the same name.

    x3270.rectangleSelect	Default false		Switch -set rectangleSelect
    			Option Select by Rectangles    -clear rectangleSelect
        When set to true, x3270 will always select rectangular areas of the
        screen.  When false, x3270 will select rectangular areas in 3270 mode, but
        in ANSI mode it will select continuous areas of the screen like xterm.

    x3270.rprnt		Default ^R
        Used in ANSI mode, when communicating in line-at-a-time mode (when x3270
        gathers a line of input before forwarding it to the host).  Defines a
        special character used for editing input, and has exactly the same
        function as the "stty" parameter of the same name.

    x3270.saveLines		Default 64		Switch -sl
        The number of display lines to save for the scroll bar.

    x3270.schemeList	Default Default 3279: default
    				Bright: bright
    				Reverse: reverse
    				Green Screen: greenScreen
        Lists the options on the Color Scheme menu.  Can contain '>' characters to
        indicate a menu hierarchy.

    x3270.screenTrace	Default false		Switch -set screenTrace
    			Option Save Screen(s) in File  -clear screenTrace
        When true, x3270 will save an ASCII version of the screen image in
        a file, which defaults to /tmp/x3scr.<pid>, every time it is redrawn.
        The directory prefix is defined by the traceDir resource.   If the
        screenTraceFile resource is defined, it explicitly defines the file name
        and traceDir is ignored.

    x3270.screenTraceFile	No default
        If defined, gives the name of the file that screen traces will be
        written to.

    x3270.scripted		Default false		Switch -scripted
        When true, x3270 will read commands from standard input.  The rules for
        these commands are documented in x3270script(1).

    x3270.scrollBar		Default false		Switches -sb, +sb
    			Option Scrollbar		 -set scrollBar
    							 -clear scrollBar
        When true, x3270 will display a scroll bar to the right of the emulator
        window.

    x3270.secure		Default false
        When true, x3270 will prevent users from executing arbitrary commands
        from within the program.  In particular, the "Execute an Action" menu
        option is disabled, as are the pop-ups which allow editing the commands
        for "Print Screen Text" and "Print Window Bitmap", and the
        x3270.disconnectClear resource is set to True.  See the x3270.noOther
        resource for additional security options.

    x3270.selectBackground	Default dim gray
        On color X displays, this is the background color used for selected text
        (text highlighted with the mouse for cut and paste).  On monochrome
        X displays, selected text is in reverse video.

    x3270.showTiming	Default false		Switch -set showTiming
    			Option Show Timing	       -clear showTiming
        When true, x3270 will display on the status line the time that the host
        takes to unlock the keyboard after an AID is sent.

    x3270*suppress		No default
        When set to true, suppresses a given menu item.  For example, setting
        x3270executeActionOption.label to true will remove the Execute an
        Action option on the File menu.  The names of the menu items generally
        end in 'Option' and have label resources in X3270.xad.

    x3270.suppressActions	No default
        A list of whitespace-separated action names, with or without parentheses,
        which are to be ignored.  The actions will be completely inaccessible,
        whether by keymaps, scripts, macros or the Execute an Action menu option.
        This resource is intended to be used as a security precaution for users
        who can define their own keymaps, but who do not have access to resource
        definitions or command-line options.

    x3270.termName		Default IBM-327x-n	Switch -tn
        An alternate name to be sent in response to the host's "DO OPTION
        TERMINAL-NAME" request.  The default is "IBM-" followed bu the value of
        the "x2370.model" resource.

    x3270.traceDir		Default /tmp
        Defines the directory that data stream traces and screen images are saved
        in.

    x3270.traceFile		No default		Switch -tracefile
        If defined, gives the name of the file that data stream and event traces
        will be written to.  If given the value 'stdout', then the traces will
        be written to standard output.  If given the value 'none', then the
        traces will be piped directory to the monitor window, and no file will
        be created.

    x3270.traceFileSize	No default		Switch -tracefilesize
        If defined, gives a limit on the size of the file that data stream and
        event traces will be written to.  If not defined, or defined as '0', there
        will be no limit on the size of the file.  The value is a number, followed
        by an optional suffix.  If the suffix is 'K' (e.g., '128K'), the value will
        be multiplied by 1024.  If the suffix is 'M', the value will be multiplied
        by (1024*1024).  The size limit enforced at operation boundaries, not per
        byte, so the actual file may grow slightly larger.  When the file size
        exceeds the limit, the second half of the file will be written over the
        first, so that in steady state, the file size will vary between half the
        traceFileSize and the entire traceFileSize.

    x3270.traceMonitor	Default true
        When true, x3270 will create an xterm to monitor data stream and event
        traces.  When false, no monitor window will be created (and the value of
        'none' for x3270.traceFile will be invalid).

    x3270.typeahead		Default true
        When true, x3270 will store keystrokes in a buffer when the keyboard is
        locked.  When false, these keystrokes will be dropped.

    x3270.useCursorColor	Default false
        If set to false, the cursor is drawn using the same color as the text
        behind it.  If set to true, on color X displays the cursor is drawn with
        the color specified by the x3270.cursorColor resource.

    x3270.visualBell	Default false
        When true, x3270 will flash the screen in response to an ALARM WCC or
        BELL character, rather than ringing the X display's bell.

    x3270.visualSelect	Default false
        This resource controls how x3270 displays light pen selectable fields
        that do not have a color explicitly set by the host.  When set to true,
        x3270 these fields using the color defined by x3270.visualSelectColor
        (default 6).  When set to false, x3270 will display these fields based on
        their highlighting attribute.  The attribute is used only in 3279 mode.

    x3270.visualSelectColor	Default 6
        The 3270 color index of the color to use when displaying light pen
        selectable fields.  This resource is used only if x3270.visualSelect is
        set to true.  The default is 6 (yellow).

    x3270.waitCursor	Default watch
        The name of the mouse cursor displayed when x3270 is connected to a host,
        but is unable to process keyboard input.  Cursor names are in the file
        <X11/cursorfont.h>.

    x3270.werase		Default ^W
        Used in ANSI mode, when communicating in line-at-a-time mode (when x3270
        gathers a line of input before forwarding it to the host).  Defines a
        special character used for editing input, and has exactly the same
        function as the "stty" parameter of the same name.

        When connected in ANSI character-at-a-time mode (when x3270 sends each
        keystroke to the host), this is the ASCII character that is sent to
        the host in response to the DeleteWord action.

    x3270*keyPad*large*font	Default fixed
        The font used to paint the "large" labels on the keys in the keypad, i.e.,
        the PA and PF keys.

    x3270*keyPad*small*font	Default -*-fixed-medium-r-semicondensed-*-12-*-*-*-*-*-*-*
        The font used to paint the "small" labels on the keys in the keypad, e.g.,
        the "Mono Case" key.

    x3270*value*font	Default fixed
        The is the name of the font used for the input fields in data entry
        pop-ups.

    x3270*dataLabel.font	Default -*-terminal-medium-r-normal--14-*-*-*-*-*-iso8859-1
        The font used to display values in the "About x3270" pop-up.

    x3270*font:		Default -*-helvetica-bold-r-normal--12-*-*-*-*-*-*-*
        The font used for everything else.

    x3270.baselevelTranslations
        The default translation table for the main window and keypad.  This may
        be modified with great care, however, it makes more sense to use keymaps
        to accomplish customizations.

    x3270.errorPopup.title
    x3270.infoPopup.title
    x3270.connectPopup.title
    x3270.fontPopup.title
    x3270.keymapPopup.title
    x3270.oversizePopup.title
    x3270.keypadPopup.title
    x3270.printTextPopup.title
    x3270.printWindowPopup.title
    x3270.tracePopup.title
    x3270.screentracePopup.title
    x3270.executeActionPopup.title
    x3270.saveOptionsPopup.title
    x3270.aboutPopup.title
    x3270.connectPopup.dialog.label
    x3270.fontPopup.dialog.label
    x3270.keymapPopup.dialog.label
    x3270.oversizePopup.dialog.label
    x3270.oversizePopup*confirmButton.label
    x3270.printTextPopup.dialog.label
    x3270.printTextPopup*confirmButton.label
    x3270.printWindowPopup.dialog.label
    x3270.printWindowPopup*confirmButton.label
    x3270.tracePopup.dialog.label
    x3270.tracePopup*confirmButton.label
    x3270.screentracePopup.dialog.label
    x3270.screentracePopup*confirmButton.label
    x3270.screentracePopup*confirm2Button.label
    x3270.executeActionPopup.dialog.label
    x3270.executeActionPopup*confirmButton.label
    x3270.saveOptionsPopup.dialog.label
    x3270.saveOptionsPopup*confirmButton.label
    x3270.connectPopup*confirmButton.label
    x3270.fontPopup*confirmButton.label
    x3270.keymapPopup*confirmButton.label
    x3270*okayButton.label
    x3270*cancelButton.label
    x3270*aboutOption.label
    x3270*disconnectOption.label
    x3270*exitOption.label
    x3270*printTextOption.label
    x3270*printWindowOption.label
    x3270*executeActionOption.label
    x3270*fileMenuButton.label
    x3270*fileMenu.label
    x3270*optionsMenuButton.label
    x3270*optionsMenu.label
    x3270*connectMenuButton.label
    x3270*reconnectButton.label
    x3270*macrosMenuButton.label
    x3270*hostMenu.label
    x3270*otherHostOption.label
    x3270*togglesOption.label
    x3270*fontsOption.label
    x3270*modelsOption.label
    x3270*colorsOption.label
    x3270*keymapOption.label
    x3270*keypadOption.label
    x3270*monocaseOption.label
    x3270*cursorBlinkOption.label
    x3270*showTimingOption.label
    x3270*cursorPosOption.label
    x3270*dsTraceOption.label
    x3270*eventTraceOption.label
    x3270*screenTraceOption.label
    x3270*scrollBarOption.label
    x3270*lineWrapOption.label
    x3270*marginedPasteOption.label
    x3270*rectangleSelectOption.label
    x3270*blankFillOption.label
    x3270*underlineCursorOption.label
    x3270*blockCursorOption.label
    x3270*otherFontOption.label
    x3270*lineModeOption.label
    x3270*characterModeOption.label
    x3270*model2Option.label
    x3270*model3Option.label
    x3270*model4Option.label
    x3270*model5Option.label
    x3270*oversizeOption.label
    x3270*saveOption.label
    x3270.message.reconnect
    x3270.message.processId
    x3270.message.windowId
    x3270.message.model
    x3270.message.rows
    x3270.message.columns
    x3270.message.mono
    x3270.message.fullColor
    x3270.message.pseudoColor
    x3270.message.extendedDs
    x3270.message.standardDs
    x3270.message.terminalName
    x3270.message.emulatorFont
    x3270.message.fullFont
    x3270.message.asciiFont
    x3270.message.cgFont
    x3270.message.characterSet
    x3270.message.defaultCharacterSet
    x3270.message.keyboardMap
    x3270.message.defaultKeyboardMap
    x3270.message.composeMap
    x3270.message.noComposeMap
    x3270.message.activeIcon
    x3270.message.iconFont
    x3270.message.iconLabelFont
    x3270.message.staticIcon
    x3270.message.connectedTo
    x3270.message.port
    x3270.message.charMode
    x3270.message.lineMode
    x3270.message.dsMode
    x3270.message.connectionPending
    x3270.message.notConnected
    x3270.message.specialCharacters
    x3270.message.hour
    x3270.message.hours
    x3270.message.minute
    x3270.message.minutes
    x3270.message.second
    x3270.message.seconds
    x3270.message.sent
    x3270.message.Received
    x3270.message.received
    x3270.message.byte
    x3270.message.bytes
    x3270.message.record
    x3270.message.records
    x3270.message.statusNotConnected
    x3270.message.statusConnecting
    x3270.message.statusTwait
    x3270.message.statusSyswait
    x3270.message.statusProtected
    x3270.message.statusNumeric
    x3270.message.statusOverflow
    x3270.message.statusInhibit
    x3270.message.statusScrolled
        The titles and labels used for nearly every window, menu option, and
        button.  These can be readily translated to Swahili, Hindi, or whatever.