Metadata-Version: 2.1
Name: gj2ascii
Version: 0.4.1
Summary: Render GeoJSON as ASCII on the commandline.
Home-page: https://github.com/geowurster/gj2ascii
Author: Kevin Wurster
Author-email: wursterk@gmail.com
License: New BSD License
        
        Copyright (c) 2015, Kevin D. Wurster
        All rights reserved.
        
        Redistribution and use in source and binary forms, with or without
        modification, are permitted provided that the following conditions are met:
        
        * Redistributions of source code must retain the above copyright notice, this
          list of conditions and the following disclaimer.
        
        * Redistributions in binary form must reproduce the above copyright notice,
          this list of conditions and the following disclaimer in the documentation
          and/or other materials provided with the distribution.
        
        * The names of its contributors may not be used to endorse or promote products
          derived from this software without specific prior written permission.
        
        THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
        AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
        IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
        DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
        FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
        DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
        SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
        CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
        OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
        OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Platform: UNKNOWN
Classifier: Development Status :: 4 - Beta
Classifier: Intended Audience :: Developers
Classifier: License :: OSI Approved :: BSD License
Classifier: Intended Audience :: Information Technology
Classifier: Programming Language :: Python :: 2.7
Classifier: Programming Language :: Python :: 3.3
Classifier: Programming Language :: Python :: 3.4
Classifier: Topic :: Multimedia :: Graphics :: Presentation
Classifier: Topic :: Scientific/Engineering :: GIS
Classifier: Topic :: Utilities
Provides-Extra: test
Provides-Extra: emoji
Provides-Extra: all
License-File: LICENSE.txt

.. code-block:: console

                _ ___                   _ _
       ____ _  (_)__ \ ____ ___________(_|_)
      / __ `/ / /__/ // __ `/ ___/ ___/ / /
     / /_/ / / // __// /_/ (__  ) /__/ / /
     \__, /_/ //____/\__,_/____/\___/_/_/
    /____/___/


.. image:: https://travis-ci.org/geowurster/gj2ascii.svg?branch=master
    :target: https://travis-ci.org/geowurster/gj2ascii


.. image:: https://coveralls.io/repos/geowurster/gj2ascii/badge.svg?branch=master
    :target: https://coveralls.io/r/geowurster/gj2ascii

Render spatial vector data as ASCII or emoji with Python on the commandline.

.. image:: https://raw.githubusercontent.com/geowurster/gj2ascii/master/images/emoji-land-cover-80w.png
    :target: https://github.com/geowurster/gj2ascii/blob/master/images/emoji-land-cover-80w.png
    :width: 574
    :height: 563


Why?
====

A `tweet <https://twitter.com/vtcraghead/status/575370039701929984>`__ made it seem like an interesting exercise but
the ``gj2ascii`` commandline utility has been very useful for previewing multiple files and the API has proven to be
useful for debugging complex geoprocessing operations.


Default Behavior
================

The overall goal of this utility is to provide easy access to ASCII representations
of vector geometries and overlapping layers.

1. When rendering a single layer an ASCII character is used.
2. When rendering multiple layers colors are used with a randomly assigned character underneath and a transparent fill.

There are only ``7`` colors (black is not used for auto-assignment) so if more than 7 layers
are given the ``--char`` flag must be used for each of them to manually assign a character,
emoji, or color.


Emoji Example
=============

The emoji screenshot was generated by downloading the ``GeoTIFF`` version of the
`MODIS Landcover dataset <http://glcf.umd.edu/data/lc/>`_, resampling to ``25%``
of its original, size converted to a vector with `gdal_polygonize.py <http://www.gdal.org/gdal_polygonize.html>`_,
and `split <http://gis.stackexchange.com/questions/25709/splitting-shapefile-into-separate-shapefiles-for-each-feature-using-qgis-gdal-sa>`_
into one ``ESRI Shapefile`` per class with `QGIS <qgis.org>`_, before executing the following
command:

.. code-block:: console

    $ gj2ascii \
        --bbox -130 9 -61.5 77 \
        --width 80 \
        0.geojson -c ' ' \
        1.geojson -c :christmas_tree: \
        2.geojson -c :evergreen_tree: \
        3.geojson -c :maple_leaf: \
        4.geojson -c :maple_leaf: \
        5.geojson -c :deciduous_tree: \
        6.geojson -c :herb: \
        7.geojson -c :herb: \
        8.geojson -c :herb: \
        9.geojson -c :herb: \
        10.geojson -c :ear_of_rice: \
        11.geojson -c :turtle: \
        12.geojson -c :tractor: \
        13.geojson -c :house_building: \
        14.geojson -c :leaf_fluttering_in_wind: \
        15.geojson -c :snowflake: \
        16.geojson -c :black_medium_square:

The same data can be rendered with ASCII characters instead:

.. code-block:: console

    $ gj2ascii \
        --bbox -130 9 -61.5 77 \
        --width 80 \
        0.shp -c ' ' \
        1.shp -c \# \
        2.shp -c \^ \
        3.shp -c + \
        4.shp -c \& \
        5.shp -c \$ \
        6.shp -c \% \
        7.shp -c \: \
        8.shp -c P \
        9.shp -c - \
        10.shp -c \" \
        11.shp -c 0 \
        12.shp -c = \
        13.shp -c N \
        14.shp -c \@ \
        15.shp -c \* \
        16.shp -c O


.. image:: https://raw.githubusercontent.com/geowurster/gj2ascii/master/images/ascii-land-cover-80w.png
    :target: https://github.com/geowurster/gj2ascii/tree/master/images/ascii-land-cover-80w.png
    :width: 566
    :height: 553


Other Examples
==============

See the `examples directory <https://github.com/geowurster/gj2ascii/tree/master/examples>`__ for more information and
more complex examples but the following are a good place to get started.  Some of the examples include output that
would be colored if run on the commandline or in Python but RST cannot render the ANSI codes.

Render two layers, one read from stin and one read directly from a file, across 20 pixels while explicitly specifying
a character and color for each layer and background fill, and zooming in on an area of interest.

.. code-block:: console

    $ cat sample-data/polygons.geojson | gj2ascii - \
        sample-data/lines.geojson \
        --bbox sample-data/small-aoi-polygon-line.geojson \
        --width 20 \
        --char ^=red \
        --char -=blue \
        --fill .=green
    . . . . . . - . . . . . . . . . ^ ^ ^ ^
    . . . . . - . . . . . . . . . . . ^ ^ ^
    . . . . - . . . . . . . . . . . . . - -
    . . . . - . . . . . . . . - - - - - . ^
    ^ ^ . - . . . . . . . . . . . . . . . .
    ^ ^ - . . . . . . . . . . . . . . . . .
    ^ - ^ . . . . . . . . . . . . . . . . .
    ^ - . . . . . . . . . . . . . . . . . .
    - ^ . . . . . . - . . . . . ^ . . . . .
    . - . . . . . . - - . . . ^ ^ . . . . .
    . . - . . . . . - . - . ^ ^ ^ . . . . .
    . . . - . . . . - . . - ^ ^ ^ . . . . .
    . . . . - . . - . . ^ ^ - ^ ^ . . . . .
    . . . . . - . - . ^ ^ ^ ^ - ^ . . . . .
    . . . . . . - - ^ ^ ^ ^ ^ ^ - . . . . .



Render individual features across 10 pixels and display the attributes for two
fields, ``COUNTYFP`` and ``NAME``.

.. code-block:: console

    $ gj2ascii sample-data/WV.geojson \
        --iterate \
        --properties COUNTYFP,NAME \
        --width 10

    +----------+---------+
    | COUNTYFP |     001 |
    | NAME     | Barbour |
    +----------+---------+

                + + +
      +   + + + + + + +
      + + + + + + + + +
    + + + + + + + + +
    + + + + + + + + + +
        + + + + + + +
            + + + +
            + + + +

    Press enter for the next geometry or ^C/^D or 'q' to quit...

Recreate the first example with the Python API
----------------------------------------------

There are two ways to recreate the first example with the Python API.  If the user does not care about which characters
are assigned to which color, use this one:

.. code-block:: python

    import fiona as fio
    import gj2ascii
    with fio.open('sample-data/polygons.geojson') as poly, \
            fio.open('sample-data/lines.geojson') as lines, \
            fio.open('sample-data/small-aoi-polygon-line.geojson') as bbox:
        layermap = [
            (poly, 'red'),
            (lines, 'blue')
        ]
        print(gj2ascii.style_multiple(layermap, 20, fill='green', bbox=bbox.bounds))
    0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 2 2 2 2
    0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 2 2 2
    0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1
    0 0 0 0 1 0 0 0 0 0 0 0 0 1 1 1 1 1 0 2
    2 2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    2 2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    2 1 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
    1 2 0 0 0 0 0 0 1 0 0 0 0 0 2 0 0 0 0 0
    0 1 0 0 0 0 0 0 1 1 0 0 0 2 2 0 0 0 0 0
    0 0 1 0 0 0 0 0 1 0 1 0 2 2 2 0 0 0 0 0
    0 0 0 1 0 0 0 0 1 0 0 1 2 2 2 0 0 0 0 0
    0 0 0 0 1 0 0 1 0 0 2 2 1 2 2 0 0 0 0 0
    0 0 0 0 0 1 0 1 0 2 2 2 2 1 2 0 0 0 0 0
    0 0 0 0 0 0 1 1 2 2 2 2 2 2 1 0 0 0 0 0


If the user cares about which character is assigned to which layer, use this one:

.. code-block:: python

    import fiona as fio
    import gj2ascii

    with fio.open('sample-data/polygons.geojson') as poly, \
            fio.open('sample-data/lines.geojson') as lines, \
            fio.open('sample-data/small-aoi-polygon-line.geojson') as bbox:

        # Render each layer individually with the same bbox and width
        # The fill will be assigned in the next step but must be a single space here
        rendered_layers = [
            gj2ascii.render(poly, 20, char='^', fill=' ', bbox=bbox.bounds),
            gj2ascii.render(lines, 20, char='-', fill=' ', bbox=bbox.bounds)
        ]

        # Overlay the rendered layers into one stack
        stacked = gj2ascii.stack(rendered_layers, fill='.')

        # Apply the colors and print
        colormap = {
            '^': 'red',
            '-': 'blue',
            '.': 'green'
        }
        print(gj2ascii.style(stacked, colormap))
    . . . . . . - . . . . . . . . . ^ ^ ^ ^
    . . . . . - . . . . . . . . . . . ^ ^ ^
    . . . . - . . . . . . . . . . . . . - -
    . . . . - . . . . . . . . - - - - - . ^
    ^ ^ . - . . . . . . . . . . . . . . . .
    ^ ^ - . . . . . . . . . . . . . . . . .
    ^ - ^ . . . . . . . . . . . . . . . . .
    ^ - . . . . . . . . . . . . . . . . . .
    - ^ . . . . . . - . . . . . ^ . . . . .
    . - . . . . . . - - . . . ^ ^ . . . . .
    . . - . . . . . - . - . ^ ^ ^ . . . . .
    . . . - . . . . - . . - ^ ^ ^ . . . . .
    . . . . - . . - . . ^ ^ - ^ ^ . . . . .
    . . . . . - . - . ^ ^ ^ ^ - ^ . . . . .
    . . . . . . - - ^ ^ ^ ^ ^ ^ - . . . . .

Paginating through features:

.. code-block:: python

    import fiona as fio
    import gj2ascii

    with fio.open('sample-data/WV.geojson') as src:
        for feature in gj2ascii.paginate(src, 10, properties=['COUNTYFP', 'NAME']):
            print(feature)
    +----------+---------+
    | COUNTYFP |     001 |
    | NAME     | Barbour |
    +----------+---------+

                + + +
      +   + + + + + + +
      + + + + + + + + +
    + + + + + + + + +
    + + + + + + + + + +
        + + + + + + +
            + + + +
            + + + +


Installation
============

Via pip:

.. code-block:: console

    $ pip install gj2ascii --upgrade

From master branch:

.. code-block:: console

    $ git clone https://github.com/geowurster/gj2ascii.git
    $ cd gj2ascii
    $ python setup.py install

To enable emoji:

.. code-block:: console

    $ pip install gj2ascii[emoji]


Dependencies
------------

The dependencies are pretty heavy for a utility like this and may require some
extra work to get everything installed.  All dependencies should install on their
own but there are a few potentially problematic packages.  Manually installing
the following might help:

* `Rasterio <https://github.com/mapbox/rasterio#installation>`__
* `Fiona <https://github.com/toblerity/fiona#installation>`__
* `Shapely <https://github.com/toblerity/shapely#installing-shapely>`__

Some Linux distributions require an additional step before installing rasterio:
``apt-get install python-numpy-dev libgdal1h libgdal-dev``.


Developing
==========

.. code-block:: console

    $ git clone https://github.com/geowurster/gj2ascii.git
    $ cd gj2ascii
    $ virtualenv venv
    $ source venv/bin/activate
    $ pip install -e .[all]
    $ py.test gj2ascii --cov gj2ascii --cov-report term-missing


License
=======

See ``LICENSE.txt``.

