_OrtpNetworkSimulatorParams Struct Reference

#include <rtpsession.h>

Data Fields
int	enabled
float	max_bandwidth
int	max_buffer_size
float	loss_rate
uint32_t	latency
float	consecutive_loss_probability
float	jitter_burst_density
float	jitter_strength
bool_t	rtp_only
bool_t	pad [3]
OrtpNetworkSimulatorMode	mode

Detailed Description

Structure describing the network simulator parameters

Field Documentation

float _OrtpNetworkSimulatorParams::consecutive_loss_probability

a probability of having a subsequent loss after a loss occurred, in a 0-1 range. Useful to simulate burst of lost packets

int _OrtpNetworkSimulatorParams::enabled

Whether simulation is enabled or off.

float _OrtpNetworkSimulatorParams::jitter_burst_density

density of gap/bursts events. A value of 1 means one gap/burst per second approximately

float _OrtpNetworkSimulatorParams::jitter_strength

percentage of max_bandwidth artificially consumed during bursts events

uint32_t _OrtpNetworkSimulatorParams::latency

Packet transmission delay, in ms

float _OrtpNetworkSimulatorParams::loss_rate

Percentage of lost packets

float _OrtpNetworkSimulatorParams::max_bandwidth

IP bandwidth, in bit/s. This limitation is applied after loss are simulated, so incoming bandwidth is NOT socket bandwidth, but after-loss-simulation bandwidth e.g with 50% loss, the bandwidth will be 50% reduced

int _OrtpNetworkSimulatorParams::max_buffer_size

Max number of bit buffered before being discarded

OrtpNetworkSimulatorMode _OrtpNetworkSimulatorParams::mode

whether simulation is applied to inbound or outbound stream.

bool_t _OrtpNetworkSimulatorParams::pad[3]

True for only RTP packet loss, False for both RTP and RTCP

---

The documentation for this struct was generated from the following file:

• rtpsession.h