Lecture de la liste des paquets…Fait
Les paquets suivants ont été EXCLUS :
  kernel-firmware kernel-generic kernel-headers kernel-huge kernel-modules 
  kernel-source 
Les paquets suivants vont être mis à jour :
  glibc-zoneinfo gnupg httpd irssi kdelibs libcgroup libgcrypt libpcap libsoup 
  libtiff libtirpc libzip lynx mariadb mcabber mercurial minicom mkinitrd 
  mozilla-firefox mozilla-nss mozilla-thunderbird nasm network-manager-applet 
  ntp openssl openssl-solibs openvpn php pidgin pkg-config proftpd rpcbind 
  ruby rxvt samba seamonkey seamonkey-solibs slapt-get spkg squashfs-tools 
  subversion sudo tcpdump xfce4-weather-plugin xorg-server xorg-server-xephyr 
  xorg-server-xnest xorg-server-xvfb xscreensaver 
49 mis à jour, 0 a été réinstallé, 0 a été installé dernièrement, 0 à retirer, 6 n'ont pas été mis à jour.
Il me faut télécharger 113,0kB/261,6MB d'archives.
Après décompression 179,4MB de place disque supplémentaire sera utilisée.
Voulez-vous continuer ? [y (oui)/N (non)] 
Preparation du remplacement de glibc-zoneinfo-2016j-noarch-1_slack14.2 par glibc-zoneinfo-2017b-noarch-1_slack14.2
Upgrading package glibc-zoneinfo-2016j-noarch-1_slack14.2 -> glibc-zoneinfo-2017b-noarch-1_slack14.2...
| glibc-zoneinfo (timezone database)
| 
| This package allows you to configure your time zone.
| 
| This timezone database comes from the tzdata and tzcode packages by
| Arthur David Olson et.al.  The latest version and more information
| may be found at:  http://www.iana.org/time-zones
| 
| Use the timeconfig utility to set your local time zone.
| 
| 
| 
| 
Preparation du remplacement de gnupg-1.4.21-x86_64-1_slack14.2 par gnupg-1.4.22-x86_64-1_slack14.2
Upgrading package gnupg-1.4.21-x86_64-1_slack14.2 -> gnupg-1.4.22-x86_64-1_slack14.2...
| gnupg (The GNU Privacy Guard)
| 
| GnuPG is GNU's tool for secure communication and data storage.  It can
| be used to encrypt data and to create digital signatures.  It includes
| an advanced key management facility and is compliant with the proposed
| OpenPGP Internet standard as described in RFC2440.
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de httpd-2.4.25-x86_64-1_slack14.2 par httpd-2.4.27-x86_64-2_slack14.2
Upgrading package httpd-2.4.25-x86_64-1_slack14.2 -> httpd-2.4.27-x86_64-2_slack14.2...
| httpd (The Apache HTTP Server)
| 
| Apache is an HTTP server designed as a plug-in replacement for the
| NCSA HTTP server.  It fixes numerous bugs in the NCSA server and
| includes many frequently requested new features, and has an API which
| allows it to be extended to meet users' needs more easily.
| 
| Apache is the most popular web server in the known universe; over
| half of the servers on the Internet are running Apache or one of
| its variants.
| 
| 
| 
Preparation du remplacement de irssi-0.8.21-x86_64-1_slack14.2 par irssi-1.0.4-x86_64-1_slack14.2
Upgrading package irssi-0.8.21-x86_64-1_slack14.2 -> irssi-1.0.4-x86_64-1_slack14.2...
| irssi (Internet Relay Chat client)
| 
| Irssi is an Internet Relay Chat client.  Designed to be both secure
| and expandable, irssi is easily customized using modules and scripts.
| 
| For more information, visit:  http://irssi.org
| 
| irssi was written by Timo Sirainen.
| 
| 
| 
| 
| 
Preparation du remplacement de kdelibs-4.14.21-x86_64-1 par kdelibs-4.14.32-x86_64-1_slack14.2
Upgrading package kdelibs-4.14.21-x86_64-1 -> kdelibs-4.14.32-x86_64-1_slack14.2...
| kdelibs (KDE libraries)
| 
| System libraries and other resources required for the KDE Platform.
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de libcgroup-0.41-x86_64-1 par libcgroup-0.41-x86_64-2_slack14.2
Upgrading package libcgroup-0.41-x86_64-1 -> libcgroup-0.41-x86_64-2_slack14.2...
| libcgroup (library and utilities for kernel control groups)
| 
| Control Groups provide a mechanism for aggregating/partitioning sets of
| tasks, and all their future children, into hierarchical groups with
| specialized behaviour.  It makes use of a filesystem interface.
| This package contains a library for developing applications that use
| control groups, as well as some basic userspace tools for controlling
| and monitoring control groups.
| 
| Homepage:  http://libcg.sourceforge.net/
| 
| 
| 
Preparation du remplacement de libgcrypt-1.7.3-x86_64-1_slack14.2 par libgcrypt-1.7.9-x86_64-1_slack14.2
Upgrading package libgcrypt-1.7.3-x86_64-1_slack14.2 -> libgcrypt-1.7.9-x86_64-1_slack14.2...
| libgcrypt (General purpose crypto library)
| 
| Libgcrypt is a general purpose crypto library based on the code 
| used in GnuPG. 
| 
| 
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de libpcap-1.7.4-x86_64-1 par libpcap-1.8.1-x86_64-1_slack14.2
Upgrading package libpcap-1.7.4-x86_64-1 -> libpcap-1.8.1-x86_64-1_slack14.2...
| libpcap (packet capture library)
| 
| libpcap is a library for user-level packet capture.  libpcap provides
| a portable framework for low-level network monitoring.  Applications
| include network statistics collection, security monitoring, network
| debugging, etc.  The tcpdump utility uses libpcap.
| 
| Project homepage:  http://www.tcpdump.org
| 
| 
| 
| 
| 
Preparation du remplacement de libsoup-2.52.2-x86_64-2 par libsoup-2.52.2-x86_64-3_slack14.2
Upgrading package libsoup-2.52.2-x86_64-2 -> libsoup-2.52.2-x86_64-3_slack14.2...
| libsoup (an HTTP client/server library)
| 
| Soup is an HTTP client/server library implementation in C.  It uses
| GObjects and the glib main loop to integrate well with GTK+
| applications, and has a synchronous API suitable for use in threaded
| applications.
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de libtiff-4.0.6-x86_64-1 par libtiff-4.0.7-x86_64-1_slack14.2
Upgrading package libtiff-4.0.6-x86_64-1 -> libtiff-4.0.7-x86_64-1_slack14.2...
| libtiff (a library for reading and writing TIFF files)
| 
| This package provides support for the Tag Image File Format (TIFF),
| a widely used format for storing image data.  Included is the libtiff
| library (for reading and writing TIFF files), and a collection of
| tools for working with TIFF images.
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de libtirpc-1.0.1-x86_64-2 par libtirpc-1.0.2-x86_64-1_slack14.2
Upgrading package libtirpc-1.0.1-x86_64-2 -> libtirpc-1.0.2-x86_64-1_slack14.2...
| libtirpc (Transport-Independent RPC library)
| 
| Libtirpc is a port of Sun's Transport-Independent RPC library to
| Linux.  It is being developed by Bull GNU/Linux NFSv4 project.
| 
| You will need this library if you plan to use RPC with a GLIBC
| version newer than 2.13, because the RPC stack has been removed
| from GLIBC versions newer than 2.13.  The library is required
| by the 'rpcbind' package.
| 
| http://sourceforge.net/projects/libtirpc/
| 
| 
Preparation du remplacement de libzip-1.0.1-x86_64-2 par libzip-1.0.1-x86_64-3_slack14.2
Upgrading package libzip-1.0.1-x86_64-2 -> libzip-1.0.1-x86_64-3_slack14.2...
| libzip (A library to read, create, and modify Zip archives)
| 
| This is libzip, a C library for reading, creating, and modifying
| zip archives.  Files can be added from data buffers, files, or
| compressed data copied directly from other zip archives.  Changes
| made without closing the archive can be reverted.
| 
| Homepage:  http://www.nih.at/libzip/
| 
| 
| 
| 
| 
Preparation du remplacement de lynx-2.8.8rel.2-x86_64-1 par lynx-2.8.8rel.2-x86_64-3_slack14.2
Upgrading package lynx-2.8.8rel.2-x86_64-1 -> lynx-2.8.8rel.2-x86_64-3_slack14.2...
| Lynx (text mode browser)
| 
| Lynx is a distributed hypertext browser with full World Wide Web
| capabilities.  Lynx can be used to access information on the World 
| Wide Web, or to build information systems intended primarily for local
| access.  For example, Lynx has been used to build several Campus Wide
| Information Systems (CWIS).  
| 
| Lynx's authors include Lou Montulli, Garrett Blythe, Craig Lavender,
| Michael Grobe, and Charles Rezac.
| 
| 
| 
Preparation du remplacement de mariadb-10.0.29-x86_64-1_slack14.2 par mariadb-10.0.32-x86_64-1_slack14.2
Upgrading package mariadb-10.0.29-x86_64-1_slack14.2 -> mariadb-10.0.32-x86_64-1_slack14.2...
| mariadb (Drop-in replacement for the MySQL Database Server)
| 
| MariaDB is a backward compatible, drop-in replacement branch of the
| MySQL(R) Database Server.  It includes all major open source storage
| engines, including the Aria storage engine.
| 
| Homepage: http://mariadb.org/
| 
| 
| 
| 
| 
| 
Preparation du remplacement de mcabber-1.0.4-x86_64-1_slack14.2 par mcabber-1.0.5-x86_64-1_slack14.2
Upgrading package mcabber-1.0.4-x86_64-1_slack14.2 -> mcabber-1.0.5-x86_64-1_slack14.2...
| mcabber (Jabber console client)
| 
| mcabber is a small Jabber console client for Linux, maintained by
| Mikael Berthe.  Mcabber includes features such as SSL support,
| multi-user chat (MUC), history logging, commands completion, and
| external actions triggers.
| 
| mcabber project home is:  http://www.lilotux.net/~mikael/mcabber/
| 
| 
| 
| 
| 
Preparation du remplacement de mercurial-3.8.2-x86_64-1 par mercurial-4.3.1-x86_64-1_slack14.2
Upgrading package mercurial-3.8.2-x86_64-1 -> mercurial-4.3.1-x86_64-1_slack14.2...
| mercurial (a distributed source management system)
| 
| Mercurial is a cross-platform, distributed source management tool for
| software developers.  It is written in Python, with a binary diff
| implementation written in C.  Its major features include high-
| performance;  serverless, fully distributed collaborative development;
| robust handling of both plain text and binary files;  advanced
| branching and merging capabilities;  and full source code available
| under the terms of the LGPL.
| 
| Mercurial was written by Matt Mackall and other contributors.
| 
| 
Preparation du remplacement de minicom-2.6.2-x86_64-1 par minicom-2.7.1-x86_64-1_slack14.2
Upgrading package minicom-2.6.2-x86_64-1 -> minicom-2.7.1-x86_64-1_slack14.2...
| minicom (communications package)
| 
| Minicom - a full featured menu-driven communications package similar
| to the DOS program 'Telix'.  Also includes sz/rz - utilities used to
| upload and download files using the Zmodem protocol.
| 
| Homepage:  http://alioth.debian.org/projects/minicom
| 
| 
| 
| 
| 
| 
Preparation du remplacement de mkinitrd-1.4.8-x86_64-8 par mkinitrd-1.4.10-x86_64-1_slack14.2
Upgrading package mkinitrd-1.4.8-x86_64-8 -> mkinitrd-1.4.10-x86_64-1_slack14.2...
| mkinitrd (make an initial ramdisk)
| 
| mkinitrd is a script to create an initial ramdisk that is loaded at
| the same time as the kernel.  The initial ramdisk may be responsible
| for loading kernel modules (such a filesystem or SCSI controller
| module) that are needed to mount the root filesystem.
| 
| The "initrd" is implemented as an initramfs.  See the kernel
| documentation for more information on this, if you are interested.
| 
| 
| 
| 
Preparation du remplacement de mozilla-firefox-45.6.0esr-x86_64-1gv par mozilla-firefox-52.3.0esr-x86_64-1gv
Upgrading package mozilla-firefox-45.6.0esr-x86_64-1gv -> mozilla-firefox-52.3.0esr-x86_64-1gv...
| mozilla-firefox (safe and easy web browser from Mozilla)
| 
| Firefox delivers safe, easy web browsing. A familiar user interface,
| enhanced security features including protection from online identity
| theft, and integrated search let you get the most out of the web.
| 
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de mozilla-nss-3.23-x86_64-1 par mozilla-nss-3.31.1-x86_64-1_slack14.2
Upgrading package mozilla-nss-3.23-x86_64-1 -> mozilla-nss-3.31.1-x86_64-1_slack14.2...
| mozilla-nss (Network Security Services)
| 
| Network Security Services (NSS) is a set of libraries designed to 
| support cross-platform development of security-enabled client and
| server applications. Applications built with NSS can support
| SSL v2 and v3, TLS, PKCS #5, PKCS #7, PKCS #11, PKCS #12, S/MIME,
| X.509 v3 certificates, and other security standards.
| 
| 
| Read http://www.mozilla.org/projects/security/pki/nss/overview.html
| 
| 
| 
Preparation du remplacement de mozilla-thunderbird-45.6.0-x86_64-1slint par mozilla-thunderbird-52.3.0-x86_64-1slint
Upgrading package mozilla-thunderbird-45.6.0-x86_64-1slint -> mozilla-thunderbird-52.3.0-x86_64-1slint...
| mozilla-thunderbird (Mozilla Thunderbird mail application)
| 
| 
| Mozilla Thunderbird is a redesign of the Mozilla mail component
| written using the XUL user interface language.  Thunderbird makes
| emailing safer, faster, and easier than ever before with the
| industry's best implementations of features such as intelligent spam
| filters, built-in RSS reader, quick search, and much more.
| 
| Visit the Mozilla Thunderbird project online:
|   http://www.mozilla.org/projects/thunderbird/
| 
| 
Preparation du remplacement de nasm-2.12.01-x86_64-1 par nasm-2.13.01-x86_64-1_slack14.2
Upgrading package nasm-2.12.01-x86_64-1 -> nasm-2.13.01-x86_64-1_slack14.2...
| nasm (NASM assembler)
| 
| NASM is the Netwide Assembler, a free portable assembler for the Intel
| 80x86 microprocessor series, using primarily the traditional Intel
| instruction mnemonics and syntax.
| 
| NASM was written by Simon Tatham and Julian Hall.
| 
| Homepage:  http://www.nasm.us
| 
| 
| 
| 
Preparation du remplacement de network-manager-applet-1.2.4-x86_64-1gv par network-manager-applet-1.2.6-x86_64-1gv
Upgrading package network-manager-applet-1.2.4-x86_64-1gv -> network-manager-applet-1.2.6-x86_64-1gv...
| network-manager-applet (NetworkManager Applet)
| 
| network-manager-applet is a GUI frontend for NetworkManager that sits
| in the system tray.
| 
| 
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de ntp-4.2.8p9-x86_64-1_slack14.2 par ntp-4.2.8p10-x86_64-1_slack14.2
Upgrading package ntp-4.2.8p9-x86_64-1_slack14.2 -> ntp-4.2.8p10-x86_64-1_slack14.2...
| ntp (Network Time Protocol daemon)
| 
| The Network Time Protocol (NTP) is used to synchronize the time of a
| computer client or server to another server or reference time source,
| such as a radio or satellite receiver or modem. It provides client
| accuracies typically within a millisecond on LANs and up to a few tens
| of milliseconds on WANs relative to a primary server synchronized to
| Coordinated Universal Time (UTC) via a Global Positioning Service
| (GPS) receiver, for example. 
| 
| 
| 
| 
Preparation du remplacement de openssl-1.0.2j-x86_64-1_slack14.2 par openssl-1.0.2k-x86_64-1_slack14.2
Upgrading package openssl-1.0.2j-x86_64-1_slack14.2 -> openssl-1.0.2k-x86_64-1_slack14.2...
| openssl (Secure Sockets Layer toolkit)
| 
| The OpenSSL certificate management tool and the shared libraries that
| provide various encryption and decryption algorithms and protocols.
| 
| This product includes software developed by the OpenSSL Project for
| use in the OpenSSL Toolkit (http://www.openssl.org).  This product
| includes cryptographic software written by Eric Young
| (eay@cryptsoft.com).  This product includes software written by Tim
| Hudson (tjh@cryptsoft.com).
| 
| 
| 
Preparation du remplacement de openssl-solibs-1.0.2j-x86_64-1_slack14.2 par openssl-solibs-1.0.2k-x86_64-1_slack14.2
Upgrading package openssl-solibs-1.0.2j-x86_64-1_slack14.2 -> openssl-solibs-1.0.2k-x86_64-1_slack14.2...
| openssl-solibs (OpenSSL shared libraries)
| 
| These shared libraries provide encryption routines required by
| programs such as openssh, bind, sendmail, and many others.
| 
| This product includes software developed by the OpenSSL Project for
| use in the OpenSSL Toolkit (http://www.openssl.org).  This product
| includes cryptographic software written by Eric Young
| (eay@cryptsoft.com).  This product includes software written by Tim
| Hudson (tjh@cryptsoft.com).
| 
| 
| 
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/openssl-1.0.2k/INSTALL.W32)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/openssl-1.0.2k/INSTALL)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/openssl-1.0.2k/LICENSE)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/openssl-1.0.2k/CHANGES.SSLeay)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/openssl-1.0.2k/README.ENGINE)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/openssl-1.0.2k/INSTALL.MacOS)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/openssl-1.0.2k/FAQ)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/openssl-1.0.2k/INSTALL.VMS)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/openssl-1.0.2k/NEWS)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/openssl-1.0.2k/CHANGES)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/openssl-1.0.2k/README)
Preparation du remplacement de openvpn-2.3.11-x86_64-1 par openvpn-2.3.17-x86_64-1_slack14.2
Upgrading package openvpn-2.3.11-x86_64-1 -> openvpn-2.3.17-x86_64-1_slack14.2...
| openvpn (secure IP tunnel daemon)
| 
| OpenVPN is a full-featured SSL VPN which can accommodate a wide range
| of configurations, including remote access, site-to-site VPNs, WiFi
| security, and enterprise-scale remote access with load balancing,
| failover, and fine-grained access-controls.
| 
| OpenVPN's home on the net is:  http://openvpn.net
| 
| 
| 
| 
| 
Preparation du remplacement de php-5.6.29-x86_64-1_slack14.2 par php-5.6.31-x86_64-1_slack14.2
Upgrading package php-5.6.29-x86_64-1_slack14.2 -> php-5.6.31-x86_64-1_slack14.2...
| php (HTML-embedded scripting language)
| 
| PHP is an HTML-embedded scripting language.  It shares syntax
| characteristics with C, Java, and Perl.  The primary objective behind
| this language is to make a fast and easy-to-use scripting language
| for dynamic web sites.
| 
| More information can be found online at http://www.php.net/
| 
| 
| 
| 
| 
Preparation du remplacement de pidgin-2.11.0-x86_64-1_slack14.2 par pidgin-2.12.0-x86_64-1_slack14.2
Upgrading package pidgin-2.11.0-x86_64-1_slack14.2 -> pidgin-2.12.0-x86_64-1_slack14.2...
| pidgin (GTK+ instant messaging program)
| 
| Pidgin allows you to talk to anyone using a variety of messaging
| protocols, including AIM (Oscar and TOC), ICQ, IRC, Yahoo!, MSN
| Messenger, Jabber, Gadu-Gadu, Napster, and Zephyr.  These protocols
| are implemented using a modular, easy to use design.  To use a
| protocol, just load the plugin for it.
| 
| For more info, see:  http://www.pidgin.im
| 
| 
| 
| 
Preparation du remplacement de pkg-config-0.29.1-x86_64-2 par pkg-config-0.29.2-x86_64-1_slack14.2
Upgrading package pkg-config-0.29.1-x86_64-2 -> pkg-config-0.29.2-x86_64-1_slack14.2...
| pkg-config (system for managing library compile/link flags)
| 
| pkg-config is a system for managing library compile/link flags
| that works with automake and autoconf.  It replaces the ubiquitous
| *-config scripts you may have seen with a single tool.  See the man
| page that comes with pkg-config for full documentation.
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de proftpd-1.3.5b-x86_64-1 par proftpd-1.3.5e-x86_64-1_slack14.2
Upgrading package proftpd-1.3.5b-x86_64-1 -> proftpd-1.3.5e-x86_64-1_slack14.2...
| proftpd (FTP server daemon)
| 
| ProFTPD is the Professional File Transfer Protocol (FTP) server
| daemon.  ProFTPD grew out of the desire to have a secure and
| configurable FTP server, and out of a significant admiration of the
| Apache web server.
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de rpcbind-0.2.3-x86_64-1 par rpcbind-0.2.4-x86_64-2_slack14.2
Upgrading package rpcbind-0.2.3-x86_64-1 -> rpcbind-0.2.4-x86_64-2_slack14.2...
| rpcbind (a daemon to manage RPC connections)
| 
| This is a network daemon used to manage connections to RPC services.
| It is meant as a replacement for the 'rpc.portmap' server from the
| 'portmap' package.  Daemons that offer RPC services (such as the
| daemons for NFS) tell the rpcbind on what port they listen.
| RPC network port numbers may change each time the system is booted.
| 
| This package is required to use NFS or other RPC services.
| 
| Homepage:  http://sourceforge.net/projects/rpcbind/
| 
| 
Preparation du remplacement de ruby-2.2.5-x86_64-1 par ruby-2.2.8-x86_64-1_slack14.2
Upgrading package ruby-2.2.5-x86_64-1 -> ruby-2.2.8-x86_64-1_slack14.2...
| ruby (Interpreted object-oriented scripting language)
| 
| Ruby is an interpreted scripting language for quick and easy
| object-oriented programming.  It has many features to process text
| files and to do system management tasks (as in Perl).  It is simple,
| straight-forward, and extensible.
| 
| Visit the Ruby project online at http://www.ruby-lang.org/
| 
| 
| 
| 
| 
Preparation du remplacement de rxvt-2.7.10-x86_64-4 par rxvt-2.7.10-x86_64-5_slack14.2
Upgrading package rxvt-2.7.10-x86_64-4 -> rxvt-2.7.10-x86_64-5_slack14.2...
| rxvt (terminal emulator)
| 
| rxvt is a color vt102 terminal emulator intended as an xterm
| replacement for users who do not require features such as Tektronix
| 4014 emulation and toolkit-style configurability.  As a result, rxvt
| uses much less memory -- a significant advantage on a machine serving
| many X sessions.  Also included is rclock, an analog clock for X.
| 
| 
| 
| 
| 
| 
Preparation du remplacement de samba-4.4.8-x86_64-1_slack14.2 par samba-4.4.15-x86_64-1_slack14.2
Upgrading package samba-4.4.8-x86_64-1_slack14.2 -> samba-4.4.15-x86_64-1_slack14.2...
| samba (CIFS file and print server)
| 
| Samba is a CIFS file and print server for CIFS clients.  It allows
| you to make file space or printers on a Samba host available to CIFS
| clients (such as PCs running Windows).
| 
| If you have any Windows file servers, you may be able to replace them
| or supplement them with Samba.  One of Samba's big strengths is
| integration, so you can use it to tie together your Linux hosts and
| Windows PC clients.
| 
| 
| 
Preparation du remplacement de seamonkey-2.46-x86_64-2_slack14.2 par seamonkey-2.48-x86_64-1_slack14.2
Upgrading package seamonkey-2.46-x86_64-2_slack14.2 -> seamonkey-2.48-x86_64-1_slack14.2...
| SeaMonkey (an open-source web browser suite)
| 
| The SeaMonkey browser suite.  SeaMonkey features a state-of-the-art
| web browser and powerful email client, as well as a WYSIWYG web page
| composer and a feature-rich IRC chat client.
| 
| 
| 
| Visit the SeaMonkey project at this URL:
|   http://www.mozilla.org/projects/seamonkey/
| 
| 
| 
Preparation du remplacement de seamonkey-solibs-2.46-x86_64-2_slack14.2 par seamonkey-solibs-2.48-x86_64-1_slack14.2
Upgrading package seamonkey-solibs-2.46-x86_64-2_slack14.2 -> seamonkey-solibs-2.48-x86_64-1_slack14.2...
| seamonkey-solibs (Shared libraries from Seamonkey)
| 
| This package contains a subset of the shared libraries from Seamonkey
| to provide runtime support for various programs.
| This package is built from the Seamonkey sources and is provided
| as a standalone runtime package for people who do not want to install
| the entire seamonkey package (as for server use).
| 
| This package is runtime only.  The include files and other files for
| development can be found in the seamonkey package.
| 
| 
| 
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libssl3.so)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libnssdbm3.so)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libnss3.so)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libsmime3.so)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libnssutil3.so)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libplds4.so)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libsoftokn3.chk)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libplc4.so)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libmozsqlite3.so)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libnspr4.so)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libnssckbi.so)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libsoftokn3.so)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/lib64/seamonkey-2.48/libnssdbm3.chk)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/seamonkey-2.48/LICENSE)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/seamonkey-2.48/LEGAL)
WARNING: File already exist, but it was not installed by the upgraded package. (usr/doc/seamonkey-2.48/README.txt)
Preparation du remplacement de slapt-get-0.10.2t-x86_64-4slint par slapt-get-0.10.2t-x86_64-6slint
Upgrading package slapt-get-0.10.2t-x86_64-4slint -> slapt-get-0.10.2t-x86_64-6slint...
| slapt-get (an apt like system for Slackware package management)
| 
| slapt-get allows one to search slackware and compatible repositories
| for packages, compare them with installed packages, install new
| packages or upgrade installed packages all with a few simple commands.
| * See /usr/doc/slapt-get-0.10.2t/ for complete documentation.
| * Support:
|   http://software.jaos.org/cgi-bin/mailman/listinfo/slapt-get-user
| * Please translate:
|   http://software.jaos.org/git/slapt-get/tree/po
|   then send to slapt-get-devel@software.jaos.org
| 
| 
Preparation du remplacement de spkg-1.0s3-x86_64-1gv par spkg-1.1-x86_64-1gv
Upgrading package spkg-1.0s3-x86_64-1gv -> spkg-1.1-x86_64-1gv...
| spkg (package manager)
| 
| spkg is a package manager for Slackware that is implemented in C and
| optimized for speed.
| 
| 
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de squashfs-tools-4.3-x86_64-1 par squashfs-tools-4.3-x86_64-2_slack14.2
Upgrading package squashfs-tools-4.3-x86_64-1 -> squashfs-tools-4.3-x86_64-2_slack14.2...
| squashfs-tools (squashed read-only filesystem for Linux)
| 
| Squashfs is a highly compressed read-only filesystem for Linux.
| Squashfs compresses both files, inodes and directories, and
| supports block sizes up to 1Mbytes for greater compression.
| It is implemented as a kernel module under VFS.
| The package contains tools for manipulation of squashfs bundles.
| 
| 
| squashfs-tools home: http://squashfs.sourceforge.net/
| 
| 
| 
Preparation du remplacement de subversion-1.9.4-x86_64-1 par subversion-1.9.7-x86_64-1_slack14.2
Upgrading package subversion-1.9.4-x86_64-1 -> subversion-1.9.7-x86_64-1_slack14.2...
| subversion (a version control system)
| 
| Subversion is a version control system which allows you to keep old
| versions of files and directories (usually source code), and keep a
| log of who, when, and why changes occurred, similar to other such
| systems like CVS, RCS or SCCS.  Subversion keeps all the information
| to permit extracting previous versions of those files at any time.
| 
| For more information about the Subversion project, visit:
|   http://subversion.apache.org
| 
| 
| 
Preparation du remplacement de sudo-1.8.16-x86_64-1 par sudo-1.8.20p2-x86_64-1_slack14.2
Upgrading package sudo-1.8.16-x86_64-1 -> sudo-1.8.20p2-x86_64-1_slack14.2...
| sudo (give limited root privileges to certain users)
| 
| 'sudo' is a command that allows users to execute some commands as 
| root.  The /etc/sudoers file (edited with 'visudo') specifies which
| users have access to sudo and which commands they can run.  'sudo' 
| logs all its activities to /var/log/ so the system administrator
| can keep an eye on things.
| 
| 
| 
| 
| 
| 
Preparation du remplacement de tcpdump-4.7.4-x86_64-1 par tcpdump-4.9.2-x86_64-1_slack14.2
Upgrading package tcpdump-4.7.4-x86_64-1 -> tcpdump-4.9.2-x86_64-1_slack14.2...
| tcpdump (network monitoring tool)
| 
| Tcpdump is a tool for network monitoring and data acquisition.  You
| can use it to dump information on all the packets on a network that
| match a boolean expression.  Tcpdump uses libpcap, a system
| independent interface for user-level packet capture.
| 
| Project homepage:  http://www.tcpdump.org
| 
| 
| 
| 
| 
Preparation du remplacement de xfce4-weather-plugin-0.8.8-x86_64-1_slack14.2 par xfce4-weather-plugin-0.8.9-x86_64-1_slack14.2
Upgrading package xfce4-weather-plugin-0.8.8-x86_64-1_slack14.2 -> xfce4-weather-plugin-0.8.9-x86_64-1_slack14.2...
| xfce4-weather-plugin (weather plugin for the Xfce panel)
| 
| The weather plugin displays current weather conditions and forecasts.
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de xorg-server-1.18.3-x86_64-2 par xorg-server-1.18.3-x86_64-3_slack14.2
Upgrading package xorg-server-1.18.3-x86_64-2 -> xorg-server-1.18.3-x86_64-3_slack14.2...
| xorg-server (The Xorg server, the core of the X Window System)
| 
| Xorg is a full featured X server that was originally designed for UNIX
| and UNIX-like operating systems running on Intel x86 hardware.  It now
| runs on a wider range of hardware and OS platforms.  This work was
| derived by the X.Org Foundation from the XFree86 Project's XFree86
| 4.4rc2  release.  The XFree86 release was originally derived from X386
| 1.2 by Thomas Roell which was contributed to X11R5 by Snitily Graphics
| Consulting Service.
| 
| The home page for the X project is:  http://www.x.org
| 
| 
Preparation du remplacement de xorg-server-xephyr-1.18.3-x86_64-2 par xorg-server-xephyr-1.18.3-x86_64-3_slack14.2
Upgrading package xorg-server-xephyr-1.18.3-x86_64-2 -> xorg-server-xephyr-1.18.3-x86_64-3_slack14.2...
| xorg-server-xephyr (Improved nested X server/client)
| 
| Xephyr is a nested X-Client like Xnest, but with some additional
| features like XRender support. 
| 
| 
| 
| 
| 
| 
| 
| 
| 
Preparation du remplacement de xorg-server-xnest-1.18.3-x86_64-2 par xorg-server-xnest-1.18.3-x86_64-3_slack14.2
Upgrading package xorg-server-xnest-1.18.3-x86_64-2 -> xorg-server-xnest-1.18.3-x86_64-3_slack14.2...
| xorg-server-xnest (a nested X server)
| 
| Xnest is an experimental nested server for X that acts as both a 
| client and a server.  Xnest is a client of the real server which
| manages windows and graphics requests on its behalf.  Xnest is a
| server to its own clients.  Xnest manages windows and graphics 
| requests on their behalf.  To these clients Xnest appears to be a 
| conventional server.
| 
| 
| 
| 
| 
Preparation du remplacement de xorg-server-xvfb-1.18.3-x86_64-2 par xorg-server-xvfb-1.18.3-x86_64-3_slack14.2
Upgrading package xorg-server-xvfb-1.18.3-x86_64-2 -> xorg-server-xvfb-1.18.3-x86_64-3_slack14.2...
| xorg-server-xvfb (virtual framebuffer X server)
| 
| Xvfb is an X server that can run on machines with no display hardware
| and no physical input devices.  It emulates a dumb framebuffer using 
| virtual memory.  The primary use of this server is intended to be 
| server testing.  The mfb or cfb code for any depth can be exercised
| with this server without the need for real hardware that supports the
| desired depths.  A secondary use is testing clients against unusual
| depths and screen configurations.
| 
| 
| 
| 
Preparation du remplacement de xscreensaver-5.36-x86_64-1_slack14.2 par xscreensaver-5.37-x86_64-1_slack14.2
Upgrading package xscreensaver-5.36-x86_64-1_slack14.2 -> xscreensaver-5.37-x86_64-1_slack14.2...
| xscreensaver (a screen saver and locker for X)
| 
| A modular screen saver and locker for the X Window System.  Highly
| customizable:  allows the use of any program that can draw on the
| root window as a display mode.  More than 100 display modes are
| included in this package.
| 
| Homepage:  http://www.jwz.org/xscreensaver
| 
| 
| 
| 
| 
Fait