Installation Instructions

Copyright (C) 1994-1996, 1999-2002, 2004-2012 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. This file is offered as-is, without warranty of any kind.

Basic Installation

Briefly, the shell commands ./configure; make; make install should configure, build, and install this package. GNU make or a GNU-make-compatible “make” program, likeremake.

The following more-detailed instructions are generic; see the README.md file for instructions specific to this package. Some packages provide this INSTALL file but do not implement all of the features documented below. The lack of an optional feature in a given package is not necessarily a bug. More recommendations for GNU packages ca be found in *note Makefile Conventions: (standards)Makefile Conventions.

The configure shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a Makefile in each directory of the package. It may also create one or more .h files containing system-dependent definitions. Finally, it creates a shell script config.status that you can run in the future to recreate the current configuration, and a file config.log containing compiler output (useful mainly for debugging configure).

It can also use an optional file (typically called config.cache and enabled with --cache-file=config.cache or simply -C) that saves the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale cache files.

If you need to do unusual things to compile the package, please try to figure out how configure could check whether to do them, and mail diffs or instructions to the address given in the README.md so they can be considered for the next release. If you are using the cache, and at some point config.cache contains results you don’t want to keep, you may remove or edit it.

The file configure.ac (or configure.in) is used to create configure by a program called autoconf. You need configure.ac if you want to change it or regenerate configure using a newer version of autoconf.

The simplest way to compile this package is:

1.  cd to the directory containing the package’s source code and type ./configure to configure the package for your system. Running `configure’ might take a while. While running, it prints some messages telling which features it is checking for.
2.  Type make to compile the package.
3.  Optionally, type make check to run any self-tests that come with the package, generally using the just-built uninstalled binaries.
4.  Type make install to install the programs and any data files and documentation. When installing into a prefix owned by root, it is recommended that the package be configured and built as a regular user, and only the `make install’ phase executed with root privileges.
5.  Optionally, type make installcheck to repeat any self-tests, but this time using the binaries in their final installed location. This target does not install anything. Running this target as a regular user, particularly if the prior `make install’ required root privileges, verifies that the installation completed correctly.
6.  You can remove the program binaries and object files from the source code directory by typing make clean. To also remove the files that configure created (so you can compile the package for a different kind of computer), type make distclean. There isalso a make maintainer-clean target, but that is intended mainly for the package’s developers. If you use it, you may have to get all sorts of other programs in order to regenerate files that came with the distribution.
7.  Often, you can also type make uninstall to remove the installed files again. In practice, not all packages have tested that uninstallationa works correctly, even though it is required by the GNU Coding Standards.
8.  Some packages, particularly those that use Automake, provide make distcheck, which can by used by developers to test that all other targets like make install and make uninstall work correctly.This target is generally not run by end users.

Compilers and Options

Some systems require unusual options for compilation or linking that he configure script does not know about. Run ./configure --help for details on some of the pertinent environment variables.

You can give `configure’ initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example:

     ./configure CC=c99 CFLAGS=-g LIBS=-lposix

See Defining Variables for more details.

Compiling For Multiple Architectures

You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you can use GNU make. cd to the directory where you want the object files and executables to go and run the configure script. configure automatically checks for the source code in the directory that configure is in and in ... This is known as a “VPATH” build.

With a non-GNU make, it is safer to compile the package for one architecture at a time in the source code directory. After you have installed the package for one architecture, use make distclean before reconfiguring for another architecture.

On MacOS X 10.5 and later systems, you can create libraries and executables that work on multiple system types–known as “fat” or “universal” binaries–by specifying multiple -arch' options to the compiler but only a single-arch` option to the preprocessor. Like this:

     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
                 CPP="gcc -E" CXXCPP="g++ -E"

This is not guaranteed to produce working output in all cases, you may have to build one architecture at a time and combine the results using the lipo tool if you have problems.

Installation Names

By default, make install installs the package’s commands under /usr/local/bin, include files under /usr/local/include, etc. You can specify an installation prefix other than /usr/local by giving configure the option --prefix=PREFIX, where PREFIX must be an absolute file name.

You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you pass the option --exec-prefix=PREFIX to `configure’, the package uses PREFIX as the prefix for installing programs and libraries. Documentation and other data files still use the regular prefix.

In addition, if you use an unusual directory layout you can give options like --bindir=DIR to specify different values for particular kinds of files. Run configure --help for a list of the directories you can set and what kinds of files go in them. In general, the default for these options is expressed in terms of ${prefix}, so that specifying just --prefix will affect all of the other directory specifications that were not explicitly provided.

The most portable way to affect installation locations is to pass the correct locations to configure; however, many packages provide one or both of the following shortcuts of passing variable assignments to the make install command line to change installation locations without having to reconfigure or recompile.

The first method involves providing an override variable for each affected directory. For example, make install prefix=/alternate/directory will choose an alternate location for all directory configuration variables that were expressed in terms of ${prefix}. Any directories that were specified during configure, but not in terms of ${prefix}, must each be overridden at install time for the entire installation to be relocated. The approach of makefile variable overrides for each directory variable is required by the GNU Coding Standards, and ideally causes no recompilation. However, some platforms have known limitations with the semantics of shared libraries that end up requiring recompilation when using this method, particularly noticeable in packages that use GNU Libtool.

1The second method involves providing the DESTDIR' variable.  For example,make install DESTDIR=/alternate/directory’ will prepend /alternate/directory' before all installation names.  The approach ofDESTDIR’ overrides is not required by the GNU Coding Standards, and does not work on platforms that have drive letters. On the other hand, it does better at avoiding recompilation issues, and works well even when some directory options were not specified in terms of ${prefix}' atconfigure’ time.

Optional Features

If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving configure' the option–program-prefix=PREFIX’ or `–program-suffix=SUFFIX’.

Some packages pay attention to --enable-FEATURE' options toconfigure’, where FEATURE indicates an optional part of the package. They may also pay attention to --with-PACKAGE' options, where PACKAGE is something likegnu-as’ or x' (for the X Window System).  TheREADME’ should mention any --enable-' and–with-’ options that the package recognizes.

For packages that use the X Window System, configure' can usually find the X include and library files automatically, but if it doesn't, you can use theconfigure’ options --x-includes=DIR' and–x-libraries=DIR’ to specify their locations.

Some packages offer the ability to configure how verbose the execution of make' will be.  For these packages, running./configure –enable-silent-rules’ sets the default to minimal output, which can be overridden with make V=1'; while running./configure –disable-silent-rules’ sets the default to verbose, which can be overridden with `make V=0’.

Particular systems

On HP-UX, the default C compiler is not ANSI C compatible. If GNU CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler:

     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"

and if that doesn’t work, install pre-built binaries of GCC for HP-UX.

HP-UX make' updates targets which have the same time stamps as their prerequisites, which makes it generally unusable when shipped generated files such asconfigure’ are involved. Use GNU `make’ instead.

On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its <wchar.h>' header file.  The option-nodtk’ can be used as a workaround. If GNU CC is not installed, it is therefore recommended to try

     ./configure CC="cc"

and if that doesn’t work, try

     ./configure CC="cc -nodtk"

On Solaris, don’t put /usr/ucb early in your PATH. This directory contains several dysfunctional programs; working variants of these programs are available in /usr/bin. So, if you need /usr/ucb in your PATH, put it after /usr/bin.

On Haiku, software installed for all users goes in /boot/common, not `/usr/local’. It is recommended to use the following options:

     ./configure --prefix=/boot/common

On FreeBSD and other BSD-derived OS’s, use GNU make' to build. FreeBSDmake’ doesn’t support 100% of GNU make syntax and builds may fail. Install GNU make or remake on FreeBSD 10.0 and newer as follows:

     /usr/sbin/pkg install gmake

after that use gmake instead of make for all building tasks, e.g.:

     /usr/local/bin/gmake install

Specifying the System Type

There may be some features configure cannot figure out automatically, but needs to determine by the type of machine the package will run on. Usually, assuming the package is built to be run on the same architectures, configure can figure that out, but if it prints a message saying it cannot guess the machine type, give it the --build=TYPE option. TYPE can either be a short name for the system type, such as sun4, or a canonical name which has the form:

     CPU-COMPANY-SYSTEM

where SYSTEM can have one of these forms:

     OS
     KERNEL-OS

See the file config.sub for the possible values of each field. If config.sub isn’t included in this package, then this package doesn’t need to know the machine type.

If you are building compiler tools for cross-compiling, you should use the option --target=TYPE to select the type of system they will produce code for.

If you want to use a cross compiler, that generates code for a platform different from the build platform, you should specify the “host” platform (i.e., that on which the generated programs will eventually be run) with --host=TYPE.

Sharing Defaults

If you want to set default values for configure' scripts to share, you can create a site shell script calledconfig.sitethat gives default values for variables likeCC,cache_file, andprefix’. configure' looks forPREFIX/share/config.siteif it exists, thenPREFIX/etc/config.site’ if it exists. Or, you can set the CONFIG_SITE environment variable to the location of the site script. A warning: not all configure scripts look for a site script.

Defining Variables

Variables not defined in a site shell script can be set in the environment passed to configure. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set them in the configure command line, using VAR=value. For example:

     ./configure CC=/usr/local2/bin/gcc

causes the specified gcc to be used as the C compiler (unless it is overridden in the site shell script).

Unfortunately, this technique does not work for CONFIG_SHELL due to an Autoconf limitation. Until the limitation is lifted, you can use this workaround:

     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash

`configure’ Invocation

`configure’ recognizes the following options to control how it operates.

--help -h Print a summary of all of the options to configure, and exit.

--help=short --help=recursive Print a summary of the options unique to this package’s configure, and exit. The short variant lists options used only in the top level, while the recursive variant lists options also present in any nested packages.

--version -V Print the version of Autoconf used to generate the configure script, and exit.

--cache-file=FILE Enable the cache: use and save the results of the tests in FILE, traditionally config.cache'.  FILE defaults to/dev/null’ to disable caching.

--config-cache -C Alias for --cache-file=config.cache.

--quiet --silent -q Do not print messages saying which checks are being made. To suppress all normal output, redirect it to /dev/null (any error messages will still be shown).

--srcdir=DIR Look for the package’s source code in directory DIR. Usually `configure’ can determine that directory automatically.

--prefix=DIR Use DIR as the installation prefix. See Installation Names for more details, including other options available for fine-tuning the installation locations.

--no-create -n Run the configure checks, but stop before creating any output files.

configure also accepts some other, not widely useful, options. Run configure --help for more details.
