From 0d5965212dc9956dd7f08fbeea1cd6603c575837 Mon Sep 17 00:00:00 2001 From: "B. Watson" Date: Sun, 14 Apr 2019 16:45:26 -0400 Subject: add git revision to binaries, change some defaults --- src/start_slip.sh | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'src/start_slip.sh') diff --git a/src/start_slip.sh b/src/start_slip.sh index ffb2a08..2574839 100755 --- a/src/start_slip.sh +++ b/src/start_slip.sh @@ -3,7 +3,7 @@ # Configurable stuff. You only ever need to change the IP addresses # if your LAN already uses 192.168.0.0/24. -TTY=/dev/ttyUSB0 # serial port to use +TTY=/dev/ttyS2 # serial port to use BAUD=9600 # must match baud rate in fujichat.cfg on the Atari LOCAL_IP=192.168.0.1 # SLIP IP address for Linux ("peer") host REMOTE_IP=192.168.0.2 # SLIP IP address for Atari host @@ -20,6 +20,7 @@ DUMP_PACKETS=yes # Run tcpdump on sl0 interface? #SLATTACH=a8_slattach # slattach binary (possibly patched). if not set, # search $PATH for a8_slattach, then fall back to # regular slattach. +SLATTACH=slattach #MASQ_IFACE=eth1 # if NATing, our main (LAM or internet) interface # (if not set, detect automagically) -- cgit v1.2.3