From 0c50cc1c673545843830334fe8d277c79e4b33cb Mon Sep 17 00:00:00 2001
From: "B. Watson" <yalhcru@gmail.com>
Date: Thu, 11 Feb 2016 05:41:58 -0500
Subject: add another text brightness level, make cartridge display list comply
 with Atari standards

---
 DOSes.txt            |  6 ++++--
 newtitle.s           | 19 ++++++++++++++-----
 titlecompression.txt |  7 ++++---
 3 files changed, 22 insertions(+), 10 deletions(-)

diff --git a/DOSes.txt b/DOSes.txt
index c0b5026..160f715 100644
--- a/DOSes.txt
+++ b/DOSes.txt
@@ -41,11 +41,13 @@ Tested on actual hardware:
 - SIDE2: success (older Taipan build though, need to get results for latest)
 - APE loader: success
 - DOS XL 2.30: success
-- SpartaDOS 3.2dx: fails to load. This is 3.2d patched for the XF551 drive.
-- SpartaDOS 3.2g/3.2gx with MIO: failure.
 - Micro SpartaDOS 2.2 and 4.6: success.
 - RealDOS build 0032: success (even with MIO active and TDLINE running!)
 - Atarimax flash cart EXE loader: success
+- SpartaDOS 3.2dx: success when loading from floppy, hard disk, or
+                   MIO RAMdisk. Fails when attempting to load from APE
+                   emulated drive under this DOS (which I suspect isn't
+                   Taipan's fault).
 
 Tested on emulators:
 
diff --git a/newtitle.s b/newtitle.s
index 5fdf37e..acce7c2 100644
--- a/newtitle.s
+++ b/newtitle.s
@@ -69,7 +69,7 @@ colorchoices:
  .byte $c0,$10,$00
 colorcount = (*-colorchoices)-1
 textchoices:
- .byte $0c,$0e,$0a
+ .byte $08,$0a,$0c,$0e
 textcount = (*-textchoices)-1
 
 wait1jiffy:
@@ -120,11 +120,19 @@ bottomscanlines = (totalscanlines - topscanlines)
   .word arg
  .endmacro
 
- ; display list here
+ ; display list here. slightly different display for the xex and
+ ; cart versions: the cart has an extra blank scanline just before the
+ ; menu GR.0 line, but one less blank at the top (so it comes out the same).
+ ; this is really nitpicking, but why not?
+
 dlist:
  dlbyte $70 ; 24 scanlines of blanks
  dlbyte $70
+ .ifdef CART_TARGET
+ dlbyte $60
+ .else
  dlbyte $70
+ .endif
 
  dl3byte $0f | $40, screendata ; LMS, BASIC mode 8
  .repeat topscanlines - 1
@@ -138,14 +146,15 @@ dlist:
  .ifdef CART_TARGET
   dl3byte $01, dl_ram ; DL is mainly in ROM, jump to RAM (extra scanline)
  .else
+ ;dlbyte $00 ; extra blank scanline, to match the cart version (removed by request)
  dl3byte $02 | $40, version ; LMS, 1 line of GR.0 for the version
 help_lms = * - 2
  dl3byte $41, dlist ; JVB, jump & wait for vblank
  .endif
 
- .out .sprintf("dl start $%x, end $%x, size %d", dlist, *, (* - dlist) + 1)
+ .out .sprintf("dl start $%x, end $%x, size %d", dlist, *-1, (* - dlist) + 1)
 
- .out .sprintf("C code can load at $%x", * + 1)
+ .out .sprintf("C code can load at $%x", *)
 
 helpshowing = FR1
 
@@ -276,7 +285,7 @@ start:
  sta CH
 
  ldx #0 ; X = index into bg color choices
- ldy #0 ; Y = index into text color choices
+ ldy #textcount ; Y = index into text color choices
 
  ; wait for user to press a key
 wait4key:
diff --git a/titlecompression.txt b/titlecompression.txt
index 456ddf2..6a17f56 100644
--- a/titlecompression.txt
+++ b/titlecompression.txt
@@ -1,6 +1,7 @@
-The title screen uses a crude form of compression, which I'll call ZRLE
-(zero-run length encoding). It's a special-purpose compression scheme
-I came up with, to meet the following requirements:
+For the .xex build (but not the cartridge), the title screen uses
+a crude form of compression, which I'll call ZRLE (zero-run length
+encoding). It's a special-purpose compression scheme I came up with,
+to meet the following requirements:
 
 - Must be able to compress the Taipan title screen by at least 33%
   (66% compression ratio, where the decompress code is counted as part
-- 
cgit v1.2.3