.\" Man page generated from reStructuredText.
.
.
.nr rst2man-indent-level 0
.
.de1 rstReportMargin
\\$1 \\n[an-margin]
level \\n[rst2man-indent-level]
level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
-
\\n[rst2man-indent0]
\\n[rst2man-indent1]
\\n[rst2man-indent2]
..
.de1 INDENT
.\" .rstReportMargin pre:
. RS \\$1
. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
. nr rst2man-indent-level +1
.\" .rstReportMargin post:
..
.de UNINDENT
. RE
.\" indent \\n[an-margin]
.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
.nr rst2man-indent-level -1
.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
..
.TH "UXD" 1 "2024-12-16" "0.1.0" "Urchlay's Utilities"
.SH NAME
uxd \- UTF-8 hex dumper
.SH SYNOPSIS
.sp
uxd [\fB\-n\fP] [\fB\-c\fP \fIcolors\fP] [\fB\-l\fP \fIlength\fP] [\fB\-o\fP \fIoffset\fP] [[\fB\-s\fP | \fB\-S\fP] \fIseekpos\fP] [\-[\fBbchimnruv\fP] [\fIfile\fP | \fI\-\fP]
.SH DESCRIPTION
.sp
\fBuxd\fP is a hex dump utility that\(aqs aware of UTF\-8 multibyte sequence
semantics, and uses colorized output to indicate which byte
sequences go with which human\-readable characters.
.sp
Input is read from \fIfile\fP, or standard input if \fIfile\fP is missing or
given as \fB\-\fP\&. The input is treated as UTF\-8 encoded Unicode. Since
ASCII is a subset, \fBuxd\fP works fine on plain ASCII files too. Other
encodings such as UTF\-16, ISO\-8859\-\fI, Shift\-JIS, etc, can be used, but
**uxd*\fP won\(aqt handle these any better than a regular hex\-dump utility
such as \fBxxd\fP\&.
.sp
Output is written to standard output, which is normally a
terminal. It\(aqs assumed that the terminal supports ANSI\-style color and
UTF\-8. See \fBTERMINAL SUPPORT\fP below. If you want to pipe the output
to a pager, try \fBless \-R\fP\&.
.SH OPTIONS
.sp
These options can be used on the command line, and/or in the
\fBUXD_OPTS\fP environment variable. The command line takes precedence
over the environment.
.sp
Options can be bundled: \fB\-ubc1234\fP is the same as \fB\-u\fP \fB\-b\fP \fB\-c
1234\fP\&. The one exception is the \fB\-n\fP option, which should appear
by itself.
.\" the comments are turned into the --help message by mkusage.pl.
.
.INDENT 0.0
.TP
.B  \-1
Don\(aqt alternate colors for normal characters.
.UNINDENT
.\" don't alternate colors for normal characters.
.
.INDENT 0.0
.TP
.B  \-b
Bold output. This may be more or less readable, depending on your
terminal and its color settings. Ignored if \fB\-m\fP given.
.UNINDENT
.\" bold color output.
.
.INDENT 0.0
.TP
.BI \-c \ nnnn
Set the colors to use. Must be 2 to 4 digits, from 0 to 7. These are
standard ANSI colors. The first 2 are the alternating colors for
normal characters, the 3rd digit (optional) is the color for non\-printable
and space characters, and the 4th (optional) is for invalid UTF\-8
sequences. Default: \fB2351\fP\&. This option also disables a prior \fB\-m\fP
option.
.UNINDENT
.\" colors (2 to 4 digits, 0 to 7).
.
.INDENT 0.0
.TP
.B  \-h\fP,\fB  \-\-help
Print built\-in usage message and exit.
.UNINDENT
.\" print this help message.
.
.INDENT 0.0
.TP
.B  \-i
After dumping, print information about the input: number of bytes,
characters, ASCII (one\-byte) characters, multi\-byte characters, and
bad sequences.
.UNINDENT
.\" print number of bytes/chars/ascii/multibyte/bad sequences.
.
.INDENT 0.0
.TP
.BI \-l \ length
Stop dumping after \fIlength\fP bytes (not characters). If the limit is
reached in the middle of a multibyte character, the entire character
will be dumped.
.UNINDENT
.\" stop dumping after <length> bytes (not characters).
.
.INDENT 0.0
.TP
.B  \-m
Monochrome mode. Uses underline, bold, reverse video instead of color.
Use this if you have trouble distinguishing the colors, or if they
look too much like angry fruit salad. Disables prior \fB\-b\fP, \fB\-c\fP
options.
.UNINDENT
.\" monochrome mode.
.
.INDENT 0.0
.TP
.B  \-n
Ignore \fBUXD_OPTS\fP environment variable. This option should not be
bundled with other options (e.g. use \fB\-n \-u\fP, not \fB\-nu\fP).
.UNINDENT
.\" ignore UXD_OPTS environment variable.
.
.INDENT 0.0
.TP
.BI \-o \ offset
Add this amount to the hex offsets (left column). May be negative,
if you can think of a reason to want it to be. Can be given in
decimal, hex (with \fI0x\fP prefix), or octal (with \fI0\fP prefix).
.UNINDENT
.\" added to hex offsets (decimal, 0x hex, 0 octal).
.
.INDENT 0.0
.TP
.B  \-r
Highlight multi\-byte sequences in reverse video, in the hex
output. Ignored if \fB\-m\fP given.
.UNINDENT
.\" highlight multi-byte chars in reverse video.
.
.INDENT 0.0
.TP
.BI \-s \ pos
Seek in input before starting to dump. \fIpos\fP is bytes, not
characters. Positive \fIpos\fP means seek from the start of the
input. Negative \fIpos\fP only works on files (not standard input);
it means seek backward from EOF. Can be given in decimal, hex (with
\fI0x\fP prefix), or octal (with \fI0\fP prefix).
.UNINDENT
.\" seek in input before dumping (-pos = seek back from EOF).
.
.INDENT 0.0
.TP
.BI \-S \ pos
Same as \fB\-s\fP, but file offsets start at 0 rather than the
position after seeking. \fB\-S 100\fP is the same as \fB\-s 100 \-o \-100\fP\&.
Works with negative \fIpos\fP, too.
.UNINDENT
.\" like -s, but also sets -o so addresses start at 0.
.
.INDENT 0.0
.TP
.B  \-u
Use uppercase hex digits \fIA\-F\fP\&. Default is lowercase.
.UNINDENT
.\" uppercase hex digits.
.
.INDENT 0.0
.TP
.B  \-v\fP,\fB  \-\-version
Print version number and exit.
.UNINDENT
.\" print version of uxd.
.
.SH OUTPUT FORMAT
.sp
The output is designed to fit in an 80\-column terminal.
.sp
Each line of output consists of eighteen columns: the offset from the
start of the file (in hex; minimum 4 digits), 16 bytes of hex
data (or empty cells, if the last line of the dump is for fewer than
16 bytes), and the human\-readable form of the same data.
.sp
The hex bytes and human\-readable data are colorized to make it obvious
which bytes make up each character. Since UTF\-8 is a variable\-width
encoding, this means that one character may be composed of up to
4 bytes.
.sp
The hex bytes that make up one character are displayed in the same
color, which alternates between yellow and green for successive
characters. In addition, they have dashes instead of spaces between
them. An example would be \fBc3\-b1\fP (for an ñ character).
.sp
The 16\-byte hex display always has an extra "spacer" column in the
center. Normally this is a space, but if a multibyte character spans
it, it will be a dash (so there\(aqll be two dashes: \fBc3\-\-b1\fP).
.sp
Since the output lines are always 16 hex bytes, multibyte characters
can span two lines. When this happens, the character itself will be
printed on the first line, along with the first byte(s) on hex. The
last hex byte will be followed by a dash, and the next line of hex
dump will have the remaining bytes (in the same color as the first
bytes and character). This sounds complicated, but it\(aqs easy to
understand once you see it a few times.
.SH EXAMPLE
.sp
It\(aqs hard to give a proper example, since man pages don\(aqt support
color. You\(aqll have to use your imagination. Also, this section of
the man page requires your man command to support UTF\-8 embedded in
the man page. If the examples looks mangled, try viewing the source
(uxd.rst) in a text editor.
.sp
Example copied from the Japanese \fBls\fP(1) man page:
.INDENT 0.0
.INDENT 3.5
.sp
.nf
.ft C
$ echo デフォル | ./uxd
0000: e3\-83\-87 e3\-83\-95 e3\-82\-\-a9 e3\-83\-ab 0a           デフォル↵
      GGGGGGGG YYYYYYYY GGGGGGGGG YYYYYYYY PP           G Y G Y P
.ft P
.fi
.UNINDENT
.UNINDENT
.sp
The colors are indicated by G/Y/P, for green, yellow, and purple. The
character above each letter is displayed in that color.
.sp
From the colorization, and from the dashes between the bytes, it\(aqs
obvious that "e3 83 87" is the hex representation of the first
character, and that the 2nd is represented by "e3 83 95.
.sp
The newline is displayed in purple because it\(aqs not a regular
printable character. Its human\-readable representation is ↵. Note
that if a regular ↵ character appears in the input, it\(aqll be
rendered in either green or yellow (so you can tell it\(aqs not just
another newline).
.SH COLORS
.sp
The colors in this description are the default ones. They can be
changed with the \fB\-c\fP option (see above).
.INDENT 0.0
.TP
.B \fBgreen\fP, \fByellow\fP
Printable characters (except the space, U+0020) alternate between green and yellow.
.TP
.B \fBpurple\fP
Spaces and unprintable characters ("control" characters, newlines, tabs, etc).
These are printed as "visible" characters, e.g. ␣ for the space, ↵ for a newline.
Hopefully this is an improvement over the usual practice of printing these as periods, like
standard hex dumpers do. The Unicode BOM (byte order marker, U+FEFF) is printed
as a purple letter B.
.TP
.B \fBred\fP
Invalid UTF\-8 sequences. These are rendered with a red background, to make them
stand out. Examples of invalid sequences:
.INDENT 7.0
.INDENT 3.5
.INDENT 0.0
.IP \(bu 2
Prefix bytes (>= 0x80) which are not followed by the correct number of continuation
bytes (with their high 2 bits set to \fB10\fP).
.IP \(bu 2
Continuation bytes that aren\(aqt preceded by a valid prefix byte.
.IP \(bu 2
Truncated UTF\-8 sequence at EOF.
.IP \(bu 2
Codepoints above U+10FFFF, which are disallowed by RFC 3629.
.UNINDENT
.UNINDENT
.UNINDENT
.UNINDENT
.SH TERMINAL SUPPORT
.sp
\fBuxd\fP should work with any modern terminal that supports color,
ANSI\-style escape sequences, Unicode, and UTF\-8 rendering.
.sp
The author\(aqs testing is done primarily with \fBurxvt\fP(1). Other
terminals aren\(aqt tested as often. Some terminals may need UTF\-8
enabled, if it\(aqs not on by default (e.g. xterm).
.sp
Known to work: urxvt, xterm, st, xfce4\-terminal, gnome\-terminal,
kitty, konsole, the Linux console (but see \fBFONTS\fP, below).
.sp
Known \fBnot\fP to work: rxvt (doesn\(aqt support Unicode at all), and its
derivatives such as aterm.
.sp
\fBuxd\fP also builds and runs correctly on a Mac running a recent
version of OSX (though I\(aqm not sure what terminal was used).
.SH FONTS
.sp
For the human\-readable column to display correctly, you\(aqll need a font
with lots of glyphs. Try \fIDeja Vu Sans Mono\fP, \fISymbola\fP, or \fIQuivira\fP
(although it\(aqs not really a terminal font). If you use urxvt, it
searches for glyphs in multiple fonts, so you can use all of the above
at once.
.sp
Any glyph your font lacks, you\(aqll see as a dotted box, or perhaps
a solid block. This isn\(aqt something \fBuxd\fP can do anything about;
you\(aqll have to use a different font, or (if you use urxvt) add another
font to your URxvt*font resource.
.sp
The Linux console is capable of rendering UTF\-8, but it\(aqs incapable
of displaying more than 512 glyphs. Most console fonts only define
256, since using more than 256 means the console won\(aqt be able to
do bold. Expect to see lots of solid or dotted boxes. This isn\(aqt
specifically a problem with \fBuxd\fP\&.
.SH FILES
.sp
\fBuxd\fP doesn\(aqt read any files other than the input file, and doesn\(aqt write to
any files other than standard output. There\(aqs no config file.
.SH ENVIRONMENT
.INDENT 0.0
.TP
.B \fBUXD_OPTS\fP
If this is set, its value is treated as a set of options, which
get applied before any command\-line options (unless the command\-line
options inclue \fB\-n\fP).
.TP
.B \fBNO_COLOR\fP
If this is set (to any value), \fBuxd\fP runs in monochrome mode, just
as though the \fB\-m\fP option were given. This variable is also
respected by \fBxxd\fP\&.
.UNINDENT
.sp
It\(aqs \fInot\fP necessary to have a UTF\-8 locale set in e.g. \fBLANG\fP or
\fBLC_ALL\fP\&. Also, the \fBTERM\fP variable is not used.
.SH EXIT STATUS
.sp
Zero for success, non\-zero for failure.
.sp
Failure status will only be returned if \fBuxd\fP failed to open the
input file. Invalid input (non\-UTF\-8) doesn\(aqt count as an error;
it\(aqll just have lots of red in the output.
.SH BUGS
.sp
\fBuxd\fP doesn\(aqt check for overlong UTF\-8 encodings (e.g. a character
that could be a 1\-byte sequence, but is encoded as 2 or more).
Sequences like this really should be colorized in red. Technically,
this means \fBuxd\fP supports WTF\-8, not UTF\-8.
.sp
There should be options and/or a config file to change the colors,
rather than baking them into the binary.
.sp
Combining characters are not handled well. Or at all, really: the 2
characters being combined will have an ANSI color code in between.
urxvt at least ignores the color code, so the composite character
displays in the color of the first (non\-combining) character. I\(aqm not
sure what a better solution would be...
.SH COPYRIGHT
.sp
Licensed under the WTFPL. See \fI\%http://www.wtfpl.net/txt/copying/\fP for details.
.SH AUTHORS
.INDENT 0.0
.IP B. 3
Watson <\fI\%urchlay@slackware.uk\fP>.
.UNINDENT
.SH SEE ALSO
.sp
xxd(1), bvi(1), utf\-8(7), unicode(7)
.\" Generated by docutils manpage writer.
.