17 files changed, 1234 insertions, 0 deletions
diff --git a/jindroush/man/Makefile b/jindroush/man/Makefile
new file mode 100644
index 0000000..bfe47c0
--- /dev/null
+++ b/jindroush/man/Makefile
@@ -0,0 +1,12 @@
+DESTDIR=
+PREFIX=/usr/local
+MANDIR=$(PREFIX)/man
+MAN1DIR=$(MANDIR)/man1
+GZIP_MAN=y
+RST2MAN=rst2man
+MANS=acvt.1 adir.1 aext.1 bas2boot.1 chkbas.1 chkexe.1 chkrom.1
+
+all: $(MANS)
+
+%.1: %.rst manhdr.rst manftr.rst
+	$(RST2MAN) $< > $@
diff --git a/jindroush/man/acvt.1 b/jindroush/man/acvt.1
new file mode 100644
index 0000000..4336fe7
--- /dev/null
+++ b/jindroush/man/acvt.1
@@ -0,0 +1,116 @@
+.\" Man page generated from reStructuredText.
+.
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.TH "ACVT" 1 "2024-05-16" "1.07" "Jindroush's Atari 8-bit tools"
+.SH NAME
+acvt \- convert between Atari 8-bit disk image formats
+.SH SYNOPSIS
+.sp
+acvt [\fB\-xfd\fP | \fB\-atr\fP | \fB\-scp\fP | \fB\-dcm\fP | \fB\-di\fP] [\fB\-batchmode\fP] [\fB\-autorepair\fP] [\fB\-norepair\fP] [\fB\-errstop\fP] [\fB\-over\fP] [\fB\-test\fP] [\fB\-classic\fP] \fIinput\-file\fP [\fIoutput\-file\fP]
+.SH DESCRIPTION
+.sp
+\fBacvt\fP converts Atari 8\-bit images between various formats. It can
+also repair some kinds of problems with broken/corrupted images.
+.sp
+Supported formats are:
+.INDENT 0.0
+.INDENT 3.5
+.INDENT 0.0
+.TP
+.B ATR
+Originally defined by SIOPC; the modern standard format.
+.TP
+.B XFD
+Originally defined by the XFormer emulator; raw images.
+.TP
+.B DCM
+DiskComm (Disk Communicator) images.
+.TP
+.B SCP
+SpartaDOS SCOPY images.
+.TP
+.B DI
+XL/ST link / XLDJ disk images.
+.UNINDENT
+.UNINDENT
+.UNINDENT
+.sp
+If no \fIoutput\-file\fP is given, the filename is created automatically by
+replacing the filename extension (e.g. \fIfoo.xfd\fP becomes \fIfoo.atr\fP).
+.sp
+If the output file already exists, it will not be overwritten unless
+the \fB\-over\fP option is given.
+.sp
+If the input file is invalid, \fBacvt\fP may prompt for a repair method.
+.SH OPTIONS
+.INDENT 0.0
+.TP
+.B \fB\-xfd\fP, \fB\-atr\fP, \fB\-scp\fP, \fB\-dcm\fP, \fB\-di\fP
+Output disk image format. Default is \fB\-atr\fP\&.
+.TP
+.B \fB\-batchmode\fP
+Multi\-file processing mode. Only input files are specified on command\-line.
+Regular expressions are allowed. Output filenames are created automatically.
+.TP
+.B \fB\-autorepair\fP
+Automatically determines the best repair method (rather than prompting).
+.TP
+.B \fB\-norepair\fP
+Doesn\(aqt ask for repair options and considers input file invalid if it needs repair.
+.TP
+.B \fB\-errstop\fP
+In batch mode, exits on the first error encountered.
+.TP
+.B \fB\-over\fP
+Overwrites existing files.
+.TP
+.B \fB\-test\fP
+Load input images and display their state, but do not write output.
+.TP
+.B \fB\-classic\fP
+Force output to be one of the classic Atari disk sizes (90K, 128K, 180K).
+.UNINDENT
+.SH COPYRIGHT
+.sp
+This utility is released under the GNU General Public License.
+.SH AUTHORS
+.sp
+This utility was written by Jindrich Kubec, AKA Jindroush.
+.sp
+This page was written by B. Watson <\fI\%urchlay@slackware.uk\fP>.
+.SH SEE ALSO
+.sp
+\fBacvt\fP(1),
+\fBaext\fP(1),
+\fBbas2boot\fP(1),
+\fBchkbas\fP(1),
+\fBchkexe\fP(1),
+\fBchkrom\fP(1).
+.\" Generated by docutils manpage writer.
+.
diff --git a/jindroush/man/acvt.rst b/jindroush/man/acvt.rst
new file mode 100644
index 0000000..925ffbc
--- /dev/null
+++ b/jindroush/man/acvt.rst
@@ -0,0 +1,77 @@
+.. |version| replace:: 1.07
+
+====
+acvt
+====
+
+----------------------------------------------
+convert between Atari 8-bit disk image formats
+----------------------------------------------
+
+.. include:: manhdr.rst
+
+SYNOPSIS
+========
+
+acvt [**-xfd** | **-atr** | **-scp** | **-dcm** | **-di**] [**-batchmode**] [**-autorepair**] [**-norepair**] [**-errstop**] [**-over**] [**-test**] [**-classic**] *input-file* [*output-file*]
+
+DESCRIPTION
+===========
+
+**acvt** converts Atari 8-bit images between various formats. It can
+also repair some kinds of problems with broken/corrupted images.
+
+Supported formats are:
+
+  ATR
+    Originally defined by SIOPC; the modern standard format.
+
+  XFD
+    Originally defined by the XFormer emulator; raw images.
+
+  DCM
+    DiskComm (Disk Communicator) images.
+
+  SCP
+    SpartaDOS SCOPY images.
+
+  DI
+    XL/ST link / XLDJ disk images.
+
+If no *output-file* is given, the filename is created automatically by
+replacing the filename extension (e.g. *foo.xfd* becomes *foo.atr*).
+
+If the output file already exists, it will not be overwritten unless
+the **-over** option is given.
+
+If the input file is invalid, **acvt** may prompt for a repair method.
+
+OPTIONS
+=======
+
+**-xfd**, **-atr**, **-scp**, **-dcm**, **-di**
+  Output disk image format. Default is **-atr**.
+
+**-batchmode**
+  Multi-file processing mode. Only input files are specified on command-line.
+  Regular expressions are allowed. Output filenames are created automatically.
+
+**-autorepair**
+  Automatically determines the best repair method (rather than prompting).
+
+**-norepair**
+  Doesn't ask for repair options and considers input file invalid if it needs repair.
+
+**-errstop**
+  In batch mode, exits on the first error encountered.
+
+**-over**
+  Overwrites existing files.
+
+**-test**
+  Load input images and display their state, but do not write output.
+
+**-classic**
+  Force output to be one of the classic Atari disk sizes (90K, 128K, 180K).
+
+.. include:: manftr.rst
diff --git a/jindroush/man/adir.1 b/jindroush/man/adir.1
new file mode 100644
index 0000000..8250225
--- /dev/null
+++ b/jindroush/man/adir.1
@@ -0,0 +1,141 @@
+.\" Man page generated from reStructuredText.
+.
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.TH "ADIR" 1 "2024-05-16" "0.67" "Jindroush's Atari 8-bit tools"
+.SH NAME
+adir \- list and extract files from Atari 8-bit disk images
+.SH SYNOPSIS
+.sp
+adir [ [\fB\-help*] | [\fP\-dos2** | [\fB\-dos3\fP] | [\fB\-mydos\fP] | [\fB\-spdos\fP] | [\fB\-kboot\fP] | [\fB\-bas2boot\fP ] | [\fB\-jonw\fP] | [\fB\-robc\fP] | [\fB\-howf\fP] | [\fB\-boot] ] [\fP\-e**] [\fB\-dir\fP \fIpath\fP] [\fB\-dontrepair\fP] \fBdisk\-image\fP [\fBmask\fP]
+.SH DESCRIPTION
+.sp
+\fBadir\fP lists and extracts the files contained in an Atari 8\-bit
+disk image. Many Atari DOS and DOS\-like filesystems are supported,
+and disk images can be in various formats.
+.sp
+The image types supported are:
+.INDENT 0.0
+.INDENT 3.5
+.INDENT 0.0
+.TP
+.B ATR
+Originally defined by SIOPC; the modern standard format.
+.TP
+.B XFD
+Originally defined by the XFormer emulator; raw images.
+.TP
+.B DCM
+DiskComm (Disk Communicator) images.
+.TP
+.B SCP
+SpartaDOS SCOPY images.
+.TP
+.B DI
+XL/ST link / XLDJ disk images.
+.UNINDENT
+.UNINDENT
+.UNINDENT
+.sp
+The image type is autodetected; there are no options to override the
+detection.
+.sp
+The filesystems supported are:
+.INDENT 0.0
+.INDENT 3.5
+.INDENT 0.0
+.IP \(bu 2
+Atari DOS 2.0/2.5 and compatibles
+.IP \(bu 2
+Atari DOS 3.0
+.IP \(bu 2
+MyDOS
+.IP \(bu 2
+Sparta DOS and compatibles (BeWe, RealDOS)
+.IP \(bu 2
+K\-Boot images
+.IP \(bu 2
+HowFen DOS
+.IP \(bu 2
+JonW multiboot
+.IP \(bu 2
+RobC multiboot
+.IP \(bu 2
+Bas2Boot images
+.IP \(bu 2
+boot images (extracts boot sector only)
+.UNINDENT
+.UNINDENT
+.UNINDENT
+.sp
+By default, \fBadir\fP attempts to autodetect the filesystem type, but it can
+be set explicitly by one of the options, below.
+.sp
+\fBmask\fP is a wildcard mask of filenames to extract. Note that
+it\(aqs case\-sensitive, meaning it generally will have to be given in
+uppercase since most Atari filesystems don\(aqt support lowercase.
+.SH OPTIONS
+.INDENT 0.0
+.TP
+.B \fB\-dos2\fP, \fB\-dos3\fP, \fB\-mydos\fP, \fB\-spdos\fP, \fB\-kboot\fP, \fB\-bas2boot\fP, \fB\-jonw\fP, \fB\-robc\fP, \fB\-howf\fP, \fB\-boot\fP
+Set the filesystem type (see list, above).
+.TP
+.B \fB\-e\fP
+Extracts files from the image. If a wildcard \fBmask\fP is given,
+files matching the wildcard will be listed (and extracted, with
+\fB\-e\fP). Without a \fBmask\fP, all files on the image will be
+listed/extracted.
+.TP
+.B \fB\-dir\fP \fIpath\fP
+Write extracted files to this directory, which will be created if it
+doesn\(aqt already exist. Default is "." (the current directory).
+.TP
+.B \fB\-dontrepair\fP
+Don\(aqt attempt to automatically repair invalid files.
+.UNINDENT
+.SH EXIT STATUS
+.sp
+Zero for success, non\-zero for failure.
+.SH COPYRIGHT
+.sp
+This utility is released under the GNU General Public License.
+.SH AUTHORS
+.sp
+This utility was written by Jindrich Kubec, AKA Jindroush.
+.sp
+This page was written by B. Watson <\fI\%urchlay@slackware.uk\fP>.
+.SH SEE ALSO
+.sp
+\fBacvt\fP(1),
+\fBaext\fP(1),
+\fBbas2boot\fP(1),
+\fBchkbas\fP(1),
+\fBchkexe\fP(1),
+\fBchkrom\fP(1).
+.\" Generated by docutils manpage writer.
+.
diff --git a/jindroush/man/adir.rst b/jindroush/man/adir.rst
new file mode 100644
index 0000000..eff5911
--- /dev/null
+++ b/jindroush/man/adir.rst
@@ -0,0 +1,89 @@
+.. |version| replace:: 0.67
+
+====
+adir
+====
+
+---------------------------------------------------
+list and extract files from Atari 8-bit disk images
+---------------------------------------------------
+
+.. include:: manhdr.rst
+
+SYNOPSIS
+========
+
+adir [ [**-help*] | [**-dos2** | [**-dos3**] | [**-mydos**] | [**-spdos**] | [**-kboot**] | [**-bas2boot** ] | [**-jonw**] | [**-robc**] | [**-howf**] | [**-boot] ] [**-e**] [**-dir** *path*] [**-dontrepair**] **disk-image** [**mask**]
+
+DESCRIPTION
+===========
+
+**adir** lists and extracts the files contained in an Atari 8-bit
+disk image. Many Atari DOS and DOS-like filesystems are supported,
+and disk images can be in various formats.
+
+The image types supported are:
+
+  ATR
+    Originally defined by SIOPC; the modern standard format.
+
+  XFD
+    Originally defined by the XFormer emulator; raw images.
+
+  DCM
+    DiskComm (Disk Communicator) images.
+
+  SCP
+    SpartaDOS SCOPY images.
+
+  DI
+    XL/ST link / XLDJ disk images.
+
+The image type is autodetected; there are no options to override the
+detection.
+
+The filesystems supported are:
+
+  - Atari DOS 2.0/2.5 and compatibles
+  - Atari DOS 3.0
+  - MyDOS
+  - Sparta DOS and compatibles (BeWe, RealDOS)
+  - K-Boot images
+  - HowFen DOS
+  - JonW multiboot
+  - RobC multiboot
+  - Bas2Boot images
+  - boot images (extracts boot sector only)
+
+By default, **adir** attempts to autodetect the filesystem type, but it can
+be set explicitly by one of the options, below.
+
+**mask** is a wildcard mask of filenames to extract. Note that
+it's case-sensitive, meaning it generally will have to be given in
+uppercase since most Atari filesystems don't support lowercase.
+
+OPTIONS
+=======
+
+**-dos2**, **-dos3**, **-mydos**, **-spdos**, **-kboot**, **-bas2boot**, **-jonw**, **-robc**, **-howf**, **-boot**
+  Set the filesystem type (see list, above).
+
+**-e**
+  Extracts files from the image. If a wildcard **mask** is given,
+  files matching the wildcard will be listed (and extracted, with
+  **-e**). Without a **mask**, all files on the image will be
+  listed/extracted.
+
+**-dir** *path*
+  Write extracted files to this directory, which will be created if it
+  doesn't already exist. Default is "." (the current directory).
+
+**-dontrepair**
+  Don't attempt to automatically repair invalid files.
+
+EXIT STATUS
+===========
+
+Zero for success, non-zero for failure.
+
+.. include:: manftr.rst
diff --git a/jindroush/man/aext.1 b/jindroush/man/aext.1
new file mode 100644
index 0000000..534c2da
--- /dev/null
+++ b/jindroush/man/aext.1
@@ -0,0 +1,55 @@
+.\" Man page generated from reStructuredText.
+.
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.TH "AEXT" 1 "2024-05-16" "1.02" "Jindroush's Atari 8-bit tools"
+.SH NAME
+aext \- extract binary blocks from Atari 8-bit disk images
+.SH SYNOPSIS
+.sp
+aext [\fB\-s\fP \fIstart\fP] [\fB\-e\fP \fIend\fP] [\fB\-l\fP \fIlength\fP] [\fB\-oa\fP] [\fB\-base\fP] \fBinput\-file\fP [\fBoutput\-file\fP]
+.SH DESCRIPTION
+.SH OPTIONS
+.SH COPYRIGHT
+.sp
+This utility is released under the GNU General Public License.
+.SH AUTHORS
+.sp
+This utility was written by Jindrich Kubec, AKA Jindroush.
+.sp
+This page was written by B. Watson <\fI\%urchlay@slackware.uk\fP>.
+.SH SEE ALSO
+.sp
+\fBacvt\fP(1),
+\fBaext\fP(1),
+\fBbas2boot\fP(1),
+\fBchkbas\fP(1),
+\fBchkexe\fP(1),
+\fBchkrom\fP(1).
+.\" Generated by docutils manpage writer.
+.
diff --git a/jindroush/man/aext.rst b/jindroush/man/aext.rst
new file mode 100644
index 0000000..ed8fb98
--- /dev/null
+++ b/jindroush/man/aext.rst
@@ -0,0 +1,24 @@
+.. |version| replace:: 1.02
+
+====
+aext
+====
+
+--------------------------------------------------
+extract binary blocks from Atari 8-bit disk images
+--------------------------------------------------
+
+.. include:: manhdr.rst
+
+SYNOPSIS
+========
+
+aext [**-s** *start*] [**-e** *end*] [**-l** *length*] [**-oa**] [**-base**] **input-file** [**output-file**]
+
+DESCRIPTION
+===========
+
+OPTIONS
+=======
+
+.. include:: manftr.rst
diff --git a/jindroush/man/bas2boot.1 b/jindroush/man/bas2boot.1
new file mode 100644
index 0000000..7e838db
--- /dev/null
+++ b/jindroush/man/bas2boot.1
@@ -0,0 +1,84 @@
+.\" Man page generated from reStructuredText.
+.
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.TH "BAS2BOOT" 1 "2024-05-16" "1.0.2" "Jindroush's Atari 8-bit tools"
+.SH NAME
+bas2boot \- make a bootable Atari 8-bit disk image of a BASIC program
+.SH SYNOPSIS
+.sp
+bas2boot [\fB\-atr\fP | \fB\-xfd\fP | \fB\-scp\fP | \fB\-dcm\fP | \fB\-di\fP] [\fB\-long\fP] [\fB\-message\fP \fItext\fP] \fBbasic\-file\fP [\fBoutput\-disk\-image\fP]
+.SH DESCRIPTION
+.sp
+\fBbas2boot\fP creates an Atari 8\-bit disk image that consists of a boot
+loader followed by a tokenized Atari BASIC program. When the disk is
+booted on the Atari, the BASIC program is loaded into memory and run.
+.sp
+There is no DOS on the disk; the BASIC program won\(aqt be able to use
+the D: devices.
+.sp
+The bootloader will enable BASIC if possible (600XL, 800XL, all
+XEs). Otherwise (400/800/1200XL), the Atari BASIC cartridge must be
+inserted. The bootloader doesn\(aqt work with other BASICs like BASIC XL,
+TurboBASIC, etc.
+.SH OPTIONS
+.INDENT 0.0
+.TP
+.B \fB\-atr\fP \fB\-xfd\fP \fB\-scp\fP \fB\-dcm\fP \fB\-di\fP
+Set the output image type. Default: \fB\-atr\fP\&. Note that the image
+type is \fInot\fP affected by the filename extension (the default
+is still \fB\-atr\fP even with a file called \fIoutput.xfd\fP).
+.TP
+.B \fB\-long\fP
+Use \(aqclassic\(aq disk size (single density, 90KB). Default is to create a
+short ATR file consisting only of the sectors used.
+.TP
+.B \fB\-message\fP \fItext\fP
+Sets message displayed while the program is loading.
+.UNINDENT
+.SH EXIT STATUS
+.sp
+Zero for success, non\-zero for failure.
+.SH COPYRIGHT
+.sp
+This utility is released under the GNU General Public License.
+.SH AUTHORS
+.sp
+This utility was written by Jindrich Kubec, AKA Jindroush.
+.sp
+This page was written by B. Watson <\fI\%urchlay@slackware.uk\fP>.
+.SH SEE ALSO
+.sp
+\fBacvt\fP(1),
+\fBaext\fP(1),
+\fBbas2boot\fP(1),
+\fBchkbas\fP(1),
+\fBchkexe\fP(1),
+\fBchkrom\fP(1).
+.\" Generated by docutils manpage writer.
+.
diff --git a/jindroush/man/bas2boot.rst b/jindroush/man/bas2boot.rst
new file mode 100644
index 0000000..c5273e6
--- /dev/null
+++ b/jindroush/man/bas2boot.rst
@@ -0,0 +1,53 @@
+.. |version| replace:: 1.0.2
+
+========
+bas2boot
+========
+
+---------------------------------------------------------
+make a bootable Atari 8-bit disk image of a BASIC program
+---------------------------------------------------------
+
+.. include:: manhdr.rst
+
+SYNOPSIS
+========
+
+bas2boot [**-atr** | **-xfd** | **-scp** | **-dcm** | **-di**] [**-long**] [**-message** *text*] **basic-file** [**output-disk-image**]
+
+DESCRIPTION
+===========
+
+**bas2boot** creates an Atari 8-bit disk image that consists of a boot
+loader followed by a tokenized Atari BASIC program. When the disk is
+booted on the Atari, the BASIC program is loaded into memory and run.
+
+There is no DOS on the disk; the BASIC program won't be able to use
+the D: devices.
+
+The bootloader will enable BASIC if possible (600XL, 800XL, all
+XEs). Otherwise (400/800/1200XL), the Atari BASIC cartridge must be
+inserted. The bootloader doesn't work with other BASICs like BASIC XL,
+TurboBASIC, etc.
+
+OPTIONS
+=======
+
+**-atr** **-xfd** **-scp** **-dcm** **-di**
+  Set the output image type. Default: **-atr**. Note that the image
+  type is *not* affected by the filename extension (the default
+  is still **-atr** even with a file called *output.xfd*).
+
+**-long**
+  Use 'classic' disk size (single density, 90KB). Default is to create a
+  short ATR file consisting only of the sectors used.
+
+**-message** *text*
+  Sets message displayed while the program is loading.
+
+EXIT STATUS
+===========
+
+Zero for success, non-zero for failure.
+
+.. include:: manftr.rst
diff --git a/jindroush/man/chkbas.1 b/jindroush/man/chkbas.1
new file mode 100644
index 0000000..1069d6c
--- /dev/null
+++ b/jindroush/man/chkbas.1
@@ -0,0 +1,155 @@
+.\" Man page generated from reStructuredText.
+.
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.TH "CHKBAS" 1 "2024-05-16" "1.10" "Jindroush's Atari 8-bit tools"
+.SH NAME
+chkbas \- check and detokenize Atari BASIC SAVEd files
+.SH SYNOPSIS
+.sp
+chkbas [\fB\-atari\fP] [\fB\-short\fP] [\fB\-verbose\fP] [\fB\-noinverse\fP] [\fB\-tbs\fP | \fB\-bxl\fP | \fB\-bxe\fP] \fBbasic\-file\fP [\fBoutput\-file\fP]
+.sp
+listbas [\fB\-atari\fP] [\fB\-verbose\fP] [\fB\-noinverse\fP] [\fB\-tbs\fP | \fB\-bxl\fP | \fB\-bxe\fP] \fBbasic\-file\fP [\fBoutput\-file\fP]
+.SH DESCRIPTION
+.sp
+\fBchkbas\fP detokenizes Atari 8\-bit BASIC SAVEd files. It lists the BASIC
+code in human\-readable form, and gives some other useful information
+about the program.
+.sp
+\fBbasic\-file\fP is an Atari BASIC, TurboBASIC, BASIC XL, or BASIC
+XE program. Output will go to \fBoutput\-file\fP, if given; otherwise,
+standard output. If \fBbasic\-file\fP is anything other than standard
+Atari BASIC, the BASIC dialect must be specified (see \fBOPTIONS\fP,
+below).
+.sp
+\fBlistbas\fP is simply an alias for \fBchkbas \-short\fP\&.
+.sp
+Sample run, with no options:
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.nf
+.ft C
+$ chkbas HELLO.BAS
+chkbas v1.10 (c) 1999\-2001 Jindrich Kubec <kubecj@asw.cz>
+
+chkbas v1.10 (c) 1999\-2001 Jindrich Kubec <kubecj@asw.cz>
+Atari Basic/Turbo Basic/Basic XL/Basic XE decompiler.
+  Latest version can be found at http://www.asw.cz/~kubecj
+  Published under GPL. See GPL.TXT.
+  Thanks to Russ Gilbert for his SALVAGE programs.
+
+Input file: HELLO.BAS
+
+Constants & pointers:
+Start of Name Table      (VNT)   : 000E
+End of Name Table        (VNTE)  : 0011
+Lenght of Name Table     (VNTL)  : 0004
+Start of Variable Table  (VVT)   : 0012
+End of Variable Table    (VVTE)  : 0021
+Length of Variable Table (VVTL)  : 0010
+Number of Variables      (NV)    : 0002
+Start of Code            (STMTAB): 0022
+Length of Code                   : 004E
+Current command          (STMCUR): 0070
+Length of current command        : 0013
+First byte after program (STARP) : 0083
+Length of file                   : 0083
+File len difference              : 00000000
+
+Variable table:
+0001 STRING   (81) 00: SPoff: 0000 Len: 5 Dim: 10  A$
+0002 SCALAR   (00) 01: 11 I
+
+Main code starts here:
+10 DIM A$(10)
+20 A$="HELLO"
+30 FOR I=1 TO 10
+40 ? A$;" WORLD!"
+50 NEXT I
+
+Immediate code starts here:
+32768 SAVE "H:HELLO.BAS"
+
+Done!
+.ft P
+.fi
+.UNINDENT
+.UNINDENT
+.SH OPTIONS
+.SS Input Options
+.INDENT 0.0
+.TP
+.B \fB\-tbs\fP
+Treat input as a Turbo BASIC program.
+.TP
+.B \fB\-bxl\fP
+Treat input as a BASIC XL program.
+.TP
+.B \fB\-bxe\fP
+Treat input as a BASIC XE program, which may or may not be EXTENDed
+with code in the extra XE banks.
+.UNINDENT
+.SS Output Options
+.INDENT 0.0
+.TP
+.B \fB\-atari\fP
+Output only the program listing, with lines terminated by Atari
+EOL characters (\fB$9B\fP).
+.TP
+.B \fB\-short\fP
+Output only the program listing, with lines terminated by the
+system default newline character(s), e.g. \fBn\fP on UNIX\-like OSes,
+\fBrn\fP on MS\-DOS or Windows. This is the default for \fBlistbas\fP\&.
+.TP
+.B \fB\-verbose\fP
+Program listing will be interspersed with per\-line and per\-statement
+low\-level information. This option is probably most useful for debugging
+\fBchkbas\fP itself.
+.UNINDENT
+.SH EXIT STATUS
+.sp
+Zero for success, non\-zero for failure.
+.SH COPYRIGHT
+.sp
+This utility is released under the GNU General Public License.
+.SH AUTHORS
+.sp
+This utility was written by Jindrich Kubec, AKA Jindroush.
+.sp
+This page was written by B. Watson <\fI\%urchlay@slackware.uk\fP>.
+.SH SEE ALSO
+.sp
+\fBacvt\fP(1),
+\fBaext\fP(1),
+\fBbas2boot\fP(1),
+\fBchkbas\fP(1),
+\fBchkexe\fP(1),
+\fBchkrom\fP(1).
+.\" Generated by docutils manpage writer.
+.
diff --git a/jindroush/man/chkbas.rst b/jindroush/man/chkbas.rst
new file mode 100644
index 0000000..2f9e6b7
--- /dev/null
+++ b/jindroush/man/chkbas.rst
@@ -0,0 +1,118 @@
+.. |version| replace:: 1.10
+
+======
+chkbas
+======
+
+--------------------------------------------
+check and detokenize Atari BASIC SAVEd files
+--------------------------------------------
+
+.. include:: manhdr.rst
+
+SYNOPSIS
+========
+
+chkbas [**-atari**] [**-short**] [**-verbose**] [**-noinverse**] [**-tbs** | **-bxl** | **-bxe**] **basic-file** [**output-file**]
+
+listbas [**-atari**] [**-verbose**] [**-noinverse**] [**-tbs** | **-bxl** | **-bxe**] **basic-file** [**output-file**]
+
+DESCRIPTION
+===========
+
+**chkbas** detokenizes Atari 8-bit BASIC SAVEd files. It lists the BASIC
+code in human-readable form, and gives some other useful information
+about the program.
+
+**basic-file** is an Atari BASIC, TurboBASIC, BASIC XL, or BASIC
+XE program. Output will go to **output-file**, if given; otherwise,
+standard output. If **basic-file** is anything other than standard
+Atari BASIC, the BASIC dialect must be specified (see **OPTIONS**,
+below).
+
+**listbas** is simply an alias for **chkbas -short**.
+
+Sample run, with no options::
+
+  $ chkbas HELLO.BAS
+  chkbas v1.10 (c) 1999-2001 Jindrich Kubec <kubecj@asw.cz>
+  
+  chkbas v1.10 (c) 1999-2001 Jindrich Kubec <kubecj@asw.cz>
+  Atari Basic/Turbo Basic/Basic XL/Basic XE decompiler.
+    Latest version can be found at http://www.asw.cz/~kubecj
+    Published under GPL. See GPL.TXT.
+    Thanks to Russ Gilbert for his SALVAGE programs.
+  
+  Input file: HELLO.BAS
+  
+  Constants & pointers:
+  Start of Name Table      (VNT)   : 000E
+  End of Name Table        (VNTE)  : 0011
+  Lenght of Name Table     (VNTL)  : 0004
+  Start of Variable Table  (VVT)   : 0012
+  End of Variable Table    (VVTE)  : 0021
+  Length of Variable Table (VVTL)  : 0010
+  Number of Variables      (NV)    : 0002
+  Start of Code            (STMTAB): 0022
+  Length of Code                   : 004E
+  Current command          (STMCUR): 0070
+  Length of current command        : 0013
+  First byte after program (STARP) : 0083
+  Length of file                   : 0083
+  File len difference              : 00000000
+  
+  Variable table:
+  0001 STRING   (81) 00: SPoff: 0000 Len: 5 Dim: 10  A$
+  0002 SCALAR   (00) 01: 11 I
+  
+  Main code starts here:
+  10 DIM A$(10)
+  20 A$="HELLO"
+  30 FOR I=1 TO 10
+  40 ? A$;" WORLD!"
+  50 NEXT I
+  
+  Immediate code starts here:
+  32768 SAVE "H:HELLO.BAS"
+  
+  Done!
+
+OPTIONS
+=======
+
+Input Options
+-------------
+
+**-tbs**
+  Treat input as a Turbo BASIC program.
+
+**-bxl**
+  Treat input as a BASIC XL program.
+
+**-bxe**
+  Treat input as a BASIC XE program, which may or may not be EXTENDed
+  with code in the extra XE banks.
+
+Output Options
+--------------
+
+**-atari**
+  Output only the program listing, with lines terminated by Atari
+  EOL characters (**$9B**).
+
+**-short**
+  Output only the program listing, with lines terminated by the
+  system default newline character(s), e.g. **\n** on UNIX-like OSes,
+  **\r\n** on MS-DOS or Windows. This is the default for **listbas**.
+
+**-verbose**
+  Program listing will be interspersed with per-line and per-statement
+  low-level information. This option is probably most useful for debugging
+  **chkbas** itself.
+
+EXIT STATUS
+===========
+
+Zero for success, non-zero for failure.
+
+.. include:: manftr.rst
diff --git a/jindroush/man/chkexe.1 b/jindroush/man/chkexe.1
new file mode 100644
index 0000000..c266a03
--- /dev/null
+++ b/jindroush/man/chkexe.1
@@ -0,0 +1,86 @@
+.\" Man page generated from reStructuredText.
+.
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.TH "CHKEXE" 1 "2024-05-16" "2.62" "Jindroush's Atari 8-bit tools"
+.SH NAME
+chkexe \- check and/or disassemble Atari 8-bit executables
+.SH SYNOPSIS
+.sp
+chkexe [\fB\-gaps\fP \fIgap\-size\fP] [\fB\-silent\fP] [\fB\-split\fP] [\fB\-d\fP] \fBxex\-file\fP [\fBoutput\-file\fP]
+.SH DESCRIPTION
+.sp
+\fBchkexe\fP reads an Atari 8\-bit executable (aka XEX file) and prints a
+list of segments, each with their start and end address. Run and init
+addresses are decoded.
+.sp
+If no \fBoutput\-file\fP is given, \fBchkexe\fP simply prints the results of
+its analysis. With an \fBoutput\-file\fP, a possibly modified copy of the
+XEX file is created: Adjacent blocks (e.g. a block ending at $1FFF,
+followed by a block beginning at $2000) will be combined. The \fB\-gaps\fP
+option can be used to control the threshold for combining blocks.
+.SH OPTIONS
+.INDENT 0.0
+.TP
+.B \fB\-gaps\fP \fIgap\-size\fP
+Blocks less than \fIgap\-size\fP bytes apart will be combined. Default: \fI0\fP\&.
+.TP
+.B \fB\-silent\fP
+Don\(aqt print informational messages.
+.TP
+.B \fB\-split\fP
+Split multi\-segment executables into one file per segment. The output
+files will be called \fIblkNNNN.blk\fP, where \fINNNN\fP is the block number in
+hexadecimal. These files are standard Atari executables, with \fI$FFFF\fP
+headers.
+.TP
+.B \fB\-d\fP
+Disassemble each block. The disassembler is very simple: single pass,
+no attempt to recognize data blocks.
+.UNINDENT
+.SH EXIT STATUS
+.sp
+Zero for success, non\-zero for failure.
+.SH COPYRIGHT
+.sp
+This utility is released under the GNU General Public License.
+.SH AUTHORS
+.sp
+This utility was written by Jindrich Kubec, AKA Jindroush.
+.sp
+This page was written by B. Watson <\fI\%urchlay@slackware.uk\fP>.
+.SH SEE ALSO
+.sp
+\fBacvt\fP(1),
+\fBaext\fP(1),
+\fBbas2boot\fP(1),
+\fBchkbas\fP(1),
+\fBchkexe\fP(1),
+\fBchkrom\fP(1).
+.\" Generated by docutils manpage writer.
+.
diff --git a/jindroush/man/chkexe.rst b/jindroush/man/chkexe.rst
new file mode 100644
index 0000000..91c65ab
--- /dev/null
+++ b/jindroush/man/chkexe.rst
@@ -0,0 +1,55 @@
+.. |version| replace:: 2.62
+
+======
+chkexe
+======
+
+------------------------------------------------
+check and/or disassemble Atari 8-bit executables
+------------------------------------------------
+
+.. include:: manhdr.rst
+
+SYNOPSIS
+========
+
+chkexe [**-gaps** *gap-size*] [**-silent**] [**-split**] [**-d**] **xex-file** [**output-file**]
+
+DESCRIPTION
+===========
+
+**chkexe** reads an Atari 8-bit executable (aka XEX file) and prints a
+list of segments, each with their start and end address. Run and init
+addresses are decoded.
+
+If no **output-file** is given, **chkexe** simply prints the results of
+its analysis. With an **output-file**, a possibly modified copy of the
+XEX file is created: Adjacent blocks (e.g. a block ending at $1FFF,
+followed by a block beginning at $2000) will be combined. The **-gaps**
+option can be used to control the threshold for combining blocks.
+
+OPTIONS
+=======
+
+**-gaps** *gap-size*
+  Blocks less than *gap-size* bytes apart will be combined. Default: *0*.
+
+**-silent**
+  Don't print informational messages.
+
+**-split**
+  Split multi-segment executables into one file per segment. The output
+  files will be called *blkNNNN.blk*, where *NNNN* is the block number in
+  hexadecimal. These files are standard Atari executables, with *$FFFF*
+  headers.
+
+**-d**
+  Disassemble each block. The disassembler is very simple: single pass,
+  no attempt to recognize data blocks.
+
+EXIT STATUS
+===========
+
+Zero for success, non-zero for failure.
+
+.. include:: manftr.rst
diff --git a/jindroush/man/chkrom.1 b/jindroush/man/chkrom.1
new file mode 100644
index 0000000..772f7b8
--- /dev/null
+++ b/jindroush/man/chkrom.1
@@ -0,0 +1,90 @@
+.\" Man page generated from reStructuredText.
+.
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.TH "CHKROM" 1 "2024-05-16" "1.00" "Jindroush's Atari 8-bit tools"
+.SH NAME
+chkrom \- check or disassemble 8K or 16K Atari 8-bit cartridge images
+.SH SYNOPSIS
+.sp
+chkrom [\fB\-disassemble\fP] \fBrom\-image\fP
+.SH DESCRIPTION
+.sp
+\fBchkrom\fP reads a \fIraw\fP Atari 8\-bit ROM image (not a \fB\&.car\fP file)
+and prints the run address, init address, and the decoded flags in the
+cartridge options byte.
+.sp
+Sample run:
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.nf
+.ft C
+$ chkrom basic.rom
+chkrom v1.00 (c) 1998\-1999 Jindrich Kubec <kubecj@asw.cz>
+ROM file:  basic.rom
+Init Addr :BFF0
+Run Addr  :A000
+Flags     :0500 ( INIT&RUN BOOT )
+Ok!
+.ft P
+.fi
+.UNINDENT
+.UNINDENT
+.sp
+\fBchkrom\fP only supports images exactly 8KB (8192 bytes) or 16KB
+(16384 bytes). Bankswitched cartridge aren\(aqt supported. If you get
+"Unknown ROM size", make sure you\(aqre using a raw image. If it\(aqs a
+\fB\&.car\fP image, use \fBcart2rom\fP(1) to make a raw image of it.
+.SH OPTIONS
+.INDENT 0.0
+.TP
+.B \fB\-disassemble\fP
+Prints a disassembly of the entire cartridge.
+.UNINDENT
+.SH EXIT STATUS
+.sp
+Zero for success, non\-zero for failure.
+.SH COPYRIGHT
+.sp
+This utility is released under the GNU General Public License.
+.SH AUTHORS
+.sp
+This utility was written by Jindrich Kubec, AKA Jindroush.
+.sp
+This page was written by B. Watson <\fI\%urchlay@slackware.uk\fP>.
+.SH SEE ALSO
+.sp
+\fBacvt\fP(1),
+\fBaext\fP(1),
+\fBbas2boot\fP(1),
+\fBchkbas\fP(1),
+\fBchkexe\fP(1),
+\fBchkrom\fP(1).
+.\" Generated by docutils manpage writer.
+.
diff --git a/jindroush/man/chkrom.rst b/jindroush/man/chkrom.rst
new file mode 100644
index 0000000..5db1b15
--- /dev/null
+++ b/jindroush/man/chkrom.rst
@@ -0,0 +1,51 @@
+.. |version| replace:: 1.00
+
+======
+chkrom
+======
+
+-----------------------------------------------------------
+check or disassemble 8K or 16K Atari 8-bit cartridge images
+-----------------------------------------------------------
+
+.. include:: manhdr.rst
+
+SYNOPSIS
+========
+
+chkrom [**-disassemble**] **rom-image**
+
+DESCRIPTION
+===========
+
+**chkrom** reads a *raw* Atari 8-bit ROM image (not a **.car** file)
+and prints the run address, init address, and the decoded flags in the
+cartridge options byte.
+
+Sample run::
+
+  $ chkrom basic.rom
+  chkrom v1.00 (c) 1998-1999 Jindrich Kubec <kubecj@asw.cz>
+  ROM file:  basic.rom
+  Init Addr :BFF0
+  Run Addr  :A000
+  Flags     :0500 ( INIT&RUN BOOT )
+  Ok!
+
+**chkrom** only supports images exactly 8KB (8192 bytes) or 16KB
+(16384 bytes). Bankswitched cartridge aren't supported. If you get
+"Unknown ROM size", make sure you're using a raw image. If it's a
+**.car** image, use **cart2rom**\(1) to make a raw image of it.
+
+OPTIONS
+=======
+
+**-disassemble**
+  Prints a disassembly of the entire cartridge.
+
+EXIT STATUS
+===========
+
+Zero for success, non-zero for failure.
+
+.. include:: manftr.rst
diff --git a/jindroush/man/manftr.rst b/jindroush/man/manftr.rst
new file mode 100644
index 0000000..192a1b4
--- /dev/null
+++ b/jindroush/man/manftr.rst
@@ -0,0 +1,21 @@
+COPYRIGHT
+=========
+
+This utility is released under the GNU General Public License.
+
+AUTHORS
+=======
+
+This utility was written by Jindrich Kubec, AKA Jindroush.
+
+This page was written by B. Watson <urchlay@slackware.uk>.
+
+SEE ALSO
+========
+
+**acvt**\(1),
+**aext**\(1),
+**bas2boot**\(1),
+**chkbas**\(1),
+**chkexe**\(1),
+**chkrom**\(1).
diff --git a/jindroush/man/manhdr.rst b/jindroush/man/manhdr.rst
new file mode 100644
index 0000000..b3db233
--- /dev/null
+++ b/jindroush/man/manhdr.rst
@@ -0,0 +1,7 @@
+.. |date| date::
+
+:Manual section: 1
+:Manual group: Jindroush's Atari 8-bit tools
+:Date: |date|
+:Version: |version|
+