path: root/listamsb.rst

========
listamsb
========

------------------------------------------------------------
List the source of a tokenized Atari Microsoft BASIC program
------------------------------------------------------------

.. include:: manhdr.rst

SYNOPSIS
========

listamsb [**-U**] | [**-C** [**-k**]] | [**-D**] | [[**-L**] [**-a**] [**-c**] [**-v**] [**-h**] [**-i**] [**-u**] [**-t**] [**-m**] [**-M**] [**-n**] [**-s**] [**-r** *line-range*] ...] [**input-file**] [**output-file**]

DESCRIPTION
===========

**listamsb** acts like the *LIST* command in Atari Microsoft BASIC. It reads a
tokenized (SAVEd) AMSB program and prints the code in human-readable
format.

**listamsb** supports both versions of Atari Microsoft BASIC: the
disk-based version 1 and the cartridge-based version 2. The language
is the same for both versions, so there's no need to specify it.

**input-file** must be a tokenized AMSB program. If no **input-file** is given,
input is read from **stdin**.

Programs created with *SAVE "filename" LOCK* are autodetected,
and will be listed normally. It's also possible to convert a LOCKed
program to an unencrypted one, with the **-U** option.

Programs can be "crunched" and "decrunched" with the **-C** and **-D**
options.

If no **output-file** is given, output is to **stdout**. When output
is to a file, the file will be overwritten without prompting if it
already exists.

By default, output is modern UTF-8 equivalents of the ATASCII
character set, with ANSI control sequences for inverse video and
color. See the **-M**, **-a**, **-i**, **-u**, **-t**, **-m**, **-s**
options to change the output style.

When listing in color (when the **-M** option is not used),
**listamsb**\'s output is piped through **colorize-amsb**, which must
be available in your **PATH**\.

**listamsb** will not write binary data (ATASCII or tokenized BASIC)
directly to a terminal, under any circumstances.

OPTIONS
=======

Operation Modes
---------------

**-L**
  LIST program. This is the default, so there's no need to give this option
  normally. See next section for options that control the listing.

**-C**
  "Crunch" program: remove comments and spaces that occur outside of a
  string. The resulting program is tokenized, and is usually 5 to 10
  percent smaller. It should RUN correctly, but will be difficult to
  edit in AMSB because its parser requires the spaces.

  The crunched program will always be unLOCKed.

  If any comment-only lines are the target of GOTO or GOSUB, the
  program won't RUN correctly because all comment-only lines are
  removed. If this happens, you can use the **-k** option (see below).

  This option must be used with an **output-file**, since seeking is done.
  None of the other options have any effect with **-C**.

**-D**
  "Decrunch" a crunched program. Puts spaces where they're required for
  AMSB's parser. The resulting program is tokenized, and will be
  editable in AMSB. Of course, any comments that were removed during
  crunching will not magically be restored (they're gone).

  The decrunched program will always be unLOCKed.

  This option must be used with an **output-file**, since seeking is done.
  None of the other options have any effect with **-D**.

**-U**
  UnLOCK or LOCK the the program. Locked programs are created with
  *SAVE "filename" LOCK*. The "encryption" is a reciprocal cipher: locking and
  unlocking are the same operation (similar to ROT13). The output will
  be the locked or unlocked tokenized program (rather than a listing).

  This option must be used with an **output-file**, a pipe, or
  redirection: **listamsb** will not write tokenized BASIC to a
  terminal. None of the other options have any effect with **-U**.

Options for **-L** (list) Mode
------------------------------

None of these options have any effect when used with **-C**, **-D**,
or **-U**.

**-a**
  Output raw ATASCII. This option must be used with an
  **output-file**, a pipe, or redirection: **listamsb** will not write
  ATASCII to a terminal. **colorize-amsb** is not used, with this option.

**-c**
  Check only. No output on **stdout**. Diagnostics are still printed on stderr,
  and the exit status is unchanged. It's an error to give an **output-file** with
  this option.

**-i**
  Input uses Atari XL/XE International Character Set encoding, rather than
  ATASCII graphics.

**-u**
  Use underlining for inverse video (see **a8cat**\(1) for more detail).

**-t**
  Text mode (see **a8cat**\(1) for more detail).

**-m**
  Magazine listing mode (see **a8cat**\(1) for more detail).

**-s**
  Strip bit 7 (inverse video bit; see **a8cat**\(1) for more detail).

**-M**
  Monochrome listing: disable color syntax highlighting, meaning **colorize-amsb**
  is not used.

**-r** *line-range*
  Show only part of the listing. *line-range* can be a single line, or
  a comma- or hyphen-separated pair of starting and ending line numbers (e.g. **100,200**, or
  **1000-2000**).

  If the start line number is omitted (e.g. **,100**), it will be treated as
  **0** (meaning, list from the beginning of the program). If the ending line
  number is omitted (e.g. **100,**), it means "list until the end of the program".
  **-r,** or **-r-** is equivalent to not using the **-r** option at all.

**-n**
  No empty line. By default, **listamsb** prints an empty line at the
  start of the output, to match AMSB's LIST command.

Options for **-C** (crunch) Mode
--------------------------------

**-k**
  Keep comment-only lines. Normally these are removed. If the program
  gives UNDEF'D LINE ERROR, it means the target line was a comment-only
  line that got removed. With **-k**, these lines will be kept, although
  the actual comments won't (*10 REM HELLO* will become *10 REM*).

Utility Options
---------------

**-v**
  Verbose output, on **stderr**. May be given twice for extra verbosity,
  which shows each line number, its offset, length, and end-of-line pointer.
  Can be used with any of the mode options (**-C**, **-D**, **-L**, **-U**).

**-h**\, **--help**
  Print built-in help and exit.

**--version**
  Print version number and exit.

DIAGNOSTICS
===========

All error and warning messages are written to the standard error output.

Fatal errors
------------

These are errors in the program header at the start of the file. They
generally mean the input isn't actually an tokenized Atari Microsoft
BASIC file.

- not an AMSB file: first byte not $00 or $01

  Pretty self-explanatory: if the file doesn't begin with a *$00* or
  *$01* byte, it's not a tokenized AMSB file.

- not an AMSB file: too big (*N* bytes), won't fit in Atari memory

  The file can't be a tokenized AMSB file because there was no way
  for it to be created. It must be some other kind of file that begins
  with a *$00* byte.

- not an AMSB file: program size too small (*N*). Atari BASIC file?

  The program header claims the file is 0, 1, 3, or 4 bytes long. This
  is impossible, so this isn't an AMSB file. A lot of Atari BASIC
  programs begin with three *$00* bytes, so that might be what this is.

- program length is 2, no code in file (SAVE after NEW)

  Probably, someone did a SAVE when there was no program in memory. It
  could also mean this isn't an AMSB file at all.

Warnings
--------

These are non-fatal: **listamsb** logs the warning to stderr, then
continues processing.

- unexpected EOF, file truncated?

  A tokenized AMSB file always ends with three null bytes (*$00*\).
  This file doesn't. Probably the rest of the file is missing.

- line *L*: EOL address *A* too (low|high)

  Each line begins with the address of the next line. If the address
  is below *$0700*, it's below the minimum value of *MEMLO*, which
  is impossible. If it's above *$bc1f*, it would be in the display
  list, screen memory, or OS ROM (also impossible). File is
  corrupt, or not an AMSB file.

- line *L*: EOL address *A* <= previous *B*

  Corrupt file, or not an AMSB file.

- line *L* is suspiciously long

  The line is >128 bytes long, but less than 256. AMSB can execute
  lines of this length, but it's impossible to actually enter them
  in the editor, because a logical line can't be longer than 3
  screen lines. Possibly corrupted file.

- line *L* is impossibly long

  The line is >= 256 bytes long. AMSB will crash, if you try to
  LOAD the file. Corrupted file.

- line *L* EOL address doesn't match actual line length *N*

  Corrupt file, or not an AMSB file.

- line number out of order

  Corrupt file, or not an AMSB file.

- line number out range

  The program contains a line number that's greater than *63999*. How
  did that happen?

- line *L* has character *C* outside of a string. maybe Atari BASIC?

  This happens when ATASCII codes 0 to 31 (*$1f*\) appear in the program.
  AMSB can create files like this, but at runtime, it's a syntax error.
  More likely, it means this is an Atari BASIC file.

- program size doesn't match size in header

  Might mean this isn't an AMSB file. If you're sure it is, it might
  be truncated, or part of the file might have been overwritten with
  *$00* bytes. It could also mean the length in the header has somehow
  gotten corrupted.

- trailing garbage at end of file

  Might mean this isn't an AMSB file. If you're sure it is, garbage
  data has somehow gotten appended to the file, after the three *$00*
  bytes that end the program. Maybe it was downloaded with a crappy
  version of XMODEM that pads the last block. The good news is,
  AMSB will just ignore the garbage when you LOAD the file, so it
  won't hurt anything.

- file has *N* unknown tokens

  Either the file is corrupt, or this is a file from some *other* variant
  of Microsoft BASIC (e.g. Commodore, AppleSoft, GW-BASIC, TRS-80). If
  you see this warning, you'll also see *N* <unknown token *XX*>
  messages in the actual listing.

ENVIRONMENT
===========

LIMITATIONS
===========

**listamsb** may behave strangely when fed something other than a
tokenized AMSB program, at least if the first byte in the file
is **$00** or **$01**. Unfortunately, tokenized Atari BASIC (and
variants like Turbo and BASIC XL) begin with **$00**. Usually
you'll get this error::

  not an AMSB file: program size too small (0). Atari BASIC file?

\.\.\.but occasionally you may get a bunch of warnings and gibberish
output instead.

EXIT STATUS
===========

0 for success, 1 if there was an error reading the input (e.g. file
not found), or 2 if the input file had errors or warnings (see
**DIAGNOSTICS**).

.. include:: manftr.rst