Do-over...

1 files changed, 0 insertions, 205 deletions

diff --git a/elvi/slack b/elvi/slack
deleted file mode 100755
index d3e2e7d..0000000
--- a/elvi/slack
+++ /dev/null
@@ -1,205 +0,0 @@
-#!/bin/sh
-
-# elvis: slack           -- Search Slackware.com packages
-
-# Author: B. Watson (yalhcru at gmail)
-# Licensed under the WTFPL. See http://www.wtfpl.net/txt/copying/ for details.
-
-# Unfortunately we can't use get with this form. Well, we can,
-# except the checkboxes for "search sets" don't work. So it has
-# to be a post request, which means this elvis depends on wget. I
-# suppose it could support curl instead (or in addition) but I don't
-# see the point.
-
-# The source search is pretty useless, but that's not this script's fault.
-
-. surfraw || exit 1
-
-if [ "$( type -p wget )" = "" ]; then
-	err "wget is required for this. please install it."
-fi
-
-get_slack_ver() {
-	local ver sitevers i
-
-	# initially set to the currently running version, if we can.
-	# unfortunately, this can be wrong: if someone upgraded to -current
-	# but didn't upgrade aaa_base, it'll still say 14.2 (or whatever they
-	# upgraded from).
-	if [ -e /etc/slackware-version ]; then
-		ver="$( cut -d' ' -f2 < /etc/slackware-version )"
-	else
-		# we're not on slackware, assume current
-		echo "current"
-		return
-	fi
-
-	# now check the site, make sure it's a supported version
-	# TODO: rewrite to use sed or awk? maybe not that big a deal.
-	sitevers="$(
-		wget -qO- "https://packages.slackware.com" | \
-			perl -ne 'print "$1 " while (/<option value="slackware-([\d.]+)"/go)'
-	)"
-
-	# if we can't get the the list of versions from the site, use contents
-	# of slackware-version, or current if we ain't got one. probably doesn't
-	# matter, if the site is broken.
-	if [ -z "$sitevers" ]; then
-		echo "${ver:-current}"
-		return
-	fi
-
-	# if it's a supported version, use it
-	for i in $sitevers; do
-		if [ "$i" = "$ver" ]; then
-			echo "$ver"
-			return
-		fi
-	done
-
-	# fall back to current
-	echo "current"
-	return
-}
-
-get_slack_arch() {
-	case "$( uname -m )" in
-		x86_64) SURFRAW_slack_arch="64" ;;
-		*)      SURFRAW_slack_arch=""   ;;
-	esac
-	echo "$SURFRAW_slack_arch"
-}
-
-w3_config_hook() {
-	def SURFRAW_slack_ver  "$( get_slack_ver )"
-	def SURFRAW_slack_arch "$( get_slack_arch )"
-	def SURFRAW_slack_mode "package"
-	def SURFRAW_slack_sets "eps"
-}
-
-w3_usage_hook() {
-	local defarch
-	[ "$SURFRAW_slack_arch" = 64 ] && defarch=64 || defarch=32
-   cat <<EOF
-Usage: $w3_argv0 [options] [search words]...
-Description:
-  Surfraw search Slackware.com packages
-Local options:
-  -v=<version>                  Slackware version (default $SURFRAW_slack_ver).
-                                For .0 releases, include the .0 (eg 14.0, not 14).
-  -C, -cur                      Same as -v=current
-  -32/-i586, -64/-x86_64        Architecture (default -$defarch)
-  -pa, -pkg, -P                 Package search (default)
-  -d, -desc                     Description search
-  -l, -label                    Label search
-  -c, -content                  Content search
-  -s=<sets>                     Search sets, <sets> may consist of:
-                                  e = extra
-                                  P = pasture
-                                  p = patches
-                                  s = slackware
-                                  S = source
-                                  t = testing
-                                Default: $SURFRAW_slack_sets
-  -S, -src                      Search source (same as -c -sS)
-  -a, -all                      Search all sets (same as -s=ePpsSt)
-Notes:
-  - Default version and architecture read from the OS (/etc/slackware-version
-    and uname -m). You can hardcode them in ~/.config/surfraw/conf (see below).
-  - Search modes: "package" looks at package names, "description"
-    looks at the .txt files named after the packages (created from the
-    slack-desc), "label" looks at the first line of .txt file, and "content"
-    looks at the contents of packages.
-  - "content" searches are for finding out which package a file belongs to.
-    Be aware that symlinks aren't found by this, although if the symlink
-    exists on the local system, its target will be used instead.
-  - The source search is basically useless without "content" mode. Actually
-    it's pretty useless anyway.
-  - Defaults can be set in the config file "~/.config/surfraw/conf". Example:
-SURFRAW_slack_ver=14.2
-SURFRAW_slack_arch=64
-SURFRAW_slack_mode=package
-SURFRAW_slack_sets=eps
-    For 32-bit architecture (i586), use:
-SURFRAW_slack_arch=""
-    In other words do NOT set it to 32, the only valid values
-    are "64" and "".
-EOF
-	w3_global_usage
-}
-
-# have to use -pa/-pkg/-P for "package", not -p as it conflicts with
-# the global -p/-print
-# -v=<version> does NOT conflict with global -version
-w3_parse_option_hook() {
-	opt="$1"
-	optarg="$2"
-	case "$opt" in
-		-v*=*)        SURFRAW_slack_ver="$optarg"      ;;
-		-C*|-cur*)    SURFRAW_slack_ver="current"      ;;
-		-32|-i?86)    SURFRAW_slack_arch=""            ;;
-		-64|x86_64)   SURFRAW_slack_arch="64"          ;;
-		-pa*|-pk*|-P) SURFRAW_slack_mode="package"     ;;
-		-d*)          SURFRAW_slack_mode="description" ;;
-		-l*)          SURFRAW_slack_mode="label"       ;;
-		-c*)          SURFRAW_slack_mode="content"     ;;
-		-s*=*)        SURFRAW_slack_sets="$optarg"     ;;
-		-S*|-src*)    SURFRAW_slack_sets="S"
-		              SURFRAW_slack_mode="content"     ;;
-		-a*)          SURFRAW_slack_sets="ePpsSt"      ;;
-		*) return 1 ;;
-	esac
-	return 0
-}
-
-w3_config
-w3_parse_args "$@"
-
-url="https://packages.slackware.com/"
-
-# try to make content search more user-friendlier.
-if [ "$SURFRAW_slack_mode" = "content" ]; then
-	if echo "$w3_args" | grep -q ^/; then
-		# resolve symlink, if possible
-		w3_args_new="$( readlink -e "$w3_args" )"
-		[ -n "$w3_args_new" ] && w3_args="$w3_args_new"
-		# remove leading /'s since the form fails with them
-		w3_args="$( echo "$w3_args" | sed 's,^/*,,' )"
-	fi
-fi
-
-postdata="search=$( w3_url_of_arg $w3_args )"
-postdata="${postdata}&release=slackware${SURFRAW_slack_arch}-${SURFRAW_slack_ver}"
-postdata="${postdata}&mode=${SURFRAW_slack_mode}"
-
-# Pick apart sets. Might be a cleaner way to do this.
-sets="$( echo "$SURFRAW_slack_sets" | sed 's,\(.\),\1 ,g' )"
-for i in $sets; do
-	case "$i" in
-		e) postdata="${postdata}&extra=on"       ;;
-		P) postdata="${postdata}&pasture=on"     ;;
-		p) postdata="${postdata}&patches=on"     ;;
-		s) postdata="${postdata}&slackware=on"   ;;
-		S) postdata="${postdata}&source=on"      ;;
-		t) postdata="${postdata}&testing=on"     ;;
-		*) err "invalid -s arg '$i'."            ;;
-	esac
-done
-
-# hardcode number of results, more is always better, right?
-postdata="${postdata}&result=1000"
-
-# wget should be quiet unless -print is enabled.
-[ "$SURFRAW_print" = "yes" ] || Q="-q"
-
-# do the post, show the results.
-# all the image, css, js URLs are absolute paths so they'll load OK.
-# the "Packages" and form target URLs are relative, so fix them with sed.
-
-dir="$( mktemp -td sr.slack.XXXXXX )"
-[ -d $dir ] || exit 1
-wget $Q -O $dir/slack.html --post-data="$postdata" $url
-sed -i "s,= *\"[./]\",=\"$url\",g" $dir/slack.html
-w3_browse_url "file://$dir/slack.html"
-[ "$SURFRAW_print" = "yes" ] && echo "POST data: $postdata"
-rm -rf $dir