diff options
Diffstat (limited to 'elvi/slack')
| -rwxr-xr-x | elvi/slack | 205 |
1 files changed, 0 insertions, 205 deletions
diff --git a/elvi/slack b/elvi/slack deleted file mode 100755 index d3e2e7d..0000000 --- a/elvi/slack +++ /dev/null @@ -1,205 +0,0 @@ -#!/bin/sh - -# elvis: slack -- Search Slackware.com packages - -# Author: B. Watson (yalhcru at gmail) -# Licensed under the WTFPL. See http://www.wtfpl.net/txt/copying/ for details. - -# Unfortunately we can't use get with this form. Well, we can, -# except the checkboxes for "search sets" don't work. So it has -# to be a post request, which means this elvis depends on wget. I -# suppose it could support curl instead (or in addition) but I don't -# see the point. - -# The source search is pretty useless, but that's not this script's fault. - -. surfraw || exit 1 - -if [ "$( type -p wget )" = "" ]; then - err "wget is required for this. please install it." -fi - -get_slack_ver() { - local ver sitevers i - - # initially set to the currently running version, if we can. - # unfortunately, this can be wrong: if someone upgraded to -current - # but didn't upgrade aaa_base, it'll still say 14.2 (or whatever they - # upgraded from). - if [ -e /etc/slackware-version ]; then - ver="$( cut -d' ' -f2 < /etc/slackware-version )" - else - # we're not on slackware, assume current - echo "current" - return - fi - - # now check the site, make sure it's a supported version - # TODO: rewrite to use sed or awk? maybe not that big a deal. - sitevers="$( - wget -qO- "https://packages.slackware.com" | \ - perl -ne 'print "$1 " while (/<option value="slackware-([\d.]+)"/go)' - )" - - # if we can't get the the list of versions from the site, use contents - # of slackware-version, or current if we ain't got one. probably doesn't - # matter, if the site is broken. - if [ -z "$sitevers" ]; then - echo "${ver:-current}" - return - fi - - # if it's a supported version, use it - for i in $sitevers; do - if [ "$i" = "$ver" ]; then - echo "$ver" - return - fi - done - - # fall back to current - echo "current" - return -} - -get_slack_arch() { - case "$( uname -m )" in - x86_64) SURFRAW_slack_arch="64" ;; - *) SURFRAW_slack_arch="" ;; - esac - echo "$SURFRAW_slack_arch" -} - -w3_config_hook() { - def SURFRAW_slack_ver "$( get_slack_ver )" - def SURFRAW_slack_arch "$( get_slack_arch )" - def SURFRAW_slack_mode "package" - def SURFRAW_slack_sets "eps" -} - -w3_usage_hook() { - local defarch - [ "$SURFRAW_slack_arch" = 64 ] && defarch=64 || defarch=32 - cat <<EOF -Usage: $w3_argv0 [options] [search words]... -Description: - Surfraw search Slackware.com packages -Local options: - -v=<version> Slackware version (default $SURFRAW_slack_ver). - For .0 releases, include the .0 (eg 14.0, not 14). - -C, -cur Same as -v=current - -32/-i586, -64/-x86_64 Architecture (default -$defarch) - -pa, -pkg, -P Package search (default) - -d, -desc Description search - -l, -label Label search - -c, -content Content search - -s=<sets> Search sets, <sets> may consist of: - e = extra - P = pasture - p = patches - s = slackware - S = source - t = testing - Default: $SURFRAW_slack_sets - -S, -src Search source (same as -c -sS) - -a, -all Search all sets (same as -s=ePpsSt) -Notes: - - Default version and architecture read from the OS (/etc/slackware-version - and uname -m). You can hardcode them in ~/.config/surfraw/conf (see below). - - Search modes: "package" looks at package names, "description" - looks at the .txt files named after the packages (created from the - slack-desc), "label" looks at the first line of .txt file, and "content" - looks at the contents of packages. - - "content" searches are for finding out which package a file belongs to. - Be aware that symlinks aren't found by this, although if the symlink - exists on the local system, its target will be used instead. - - The source search is basically useless without "content" mode. Actually - it's pretty useless anyway. - - Defaults can be set in the config file "~/.config/surfraw/conf". Example: -SURFRAW_slack_ver=14.2 -SURFRAW_slack_arch=64 -SURFRAW_slack_mode=package -SURFRAW_slack_sets=eps - For 32-bit architecture (i586), use: -SURFRAW_slack_arch="" - In other words do NOT set it to 32, the only valid values - are "64" and "". -EOF - w3_global_usage -} - -# have to use -pa/-pkg/-P for "package", not -p as it conflicts with -# the global -p/-print -# -v=<version> does NOT conflict with global -version -w3_parse_option_hook() { - opt="$1" - optarg="$2" - case "$opt" in - -v*=*) SURFRAW_slack_ver="$optarg" ;; - -C*|-cur*) SURFRAW_slack_ver="current" ;; - -32|-i?86) SURFRAW_slack_arch="" ;; - -64|x86_64) SURFRAW_slack_arch="64" ;; - -pa*|-pk*|-P) SURFRAW_slack_mode="package" ;; - -d*) SURFRAW_slack_mode="description" ;; - -l*) SURFRAW_slack_mode="label" ;; - -c*) SURFRAW_slack_mode="content" ;; - -s*=*) SURFRAW_slack_sets="$optarg" ;; - -S*|-src*) SURFRAW_slack_sets="S" - SURFRAW_slack_mode="content" ;; - -a*) SURFRAW_slack_sets="ePpsSt" ;; - *) return 1 ;; - esac - return 0 -} - -w3_config -w3_parse_args "$@" - -url="https://packages.slackware.com/" - -# try to make content search more user-friendlier. -if [ "$SURFRAW_slack_mode" = "content" ]; then - if echo "$w3_args" | grep -q ^/; then - # resolve symlink, if possible - w3_args_new="$( readlink -e "$w3_args" )" - [ -n "$w3_args_new" ] && w3_args="$w3_args_new" - # remove leading /'s since the form fails with them - w3_args="$( echo "$w3_args" | sed 's,^/*,,' )" - fi -fi - -postdata="search=$( w3_url_of_arg $w3_args )" -postdata="${postdata}&release=slackware${SURFRAW_slack_arch}-${SURFRAW_slack_ver}" -postdata="${postdata}&mode=${SURFRAW_slack_mode}" - -# Pick apart sets. Might be a cleaner way to do this. -sets="$( echo "$SURFRAW_slack_sets" | sed 's,\(.\),\1 ,g' )" -for i in $sets; do - case "$i" in - e) postdata="${postdata}&extra=on" ;; - P) postdata="${postdata}&pasture=on" ;; - p) postdata="${postdata}&patches=on" ;; - s) postdata="${postdata}&slackware=on" ;; - S) postdata="${postdata}&source=on" ;; - t) postdata="${postdata}&testing=on" ;; - *) err "invalid -s arg '$i'." ;; - esac -done - -# hardcode number of results, more is always better, right? -postdata="${postdata}&result=1000" - -# wget should be quiet unless -print is enabled. -[ "$SURFRAW_print" = "yes" ] || Q="-q" - -# do the post, show the results. -# all the image, css, js URLs are absolute paths so they'll load OK. -# the "Packages" and form target URLs are relative, so fix them with sed. - -dir="$( mktemp -td sr.slack.XXXXXX )" -[ -d $dir ] || exit 1 -wget $Q -O $dir/slack.html --post-data="$postdata" $url -sed -i "s,= *\"[./]\",=\"$url\",g" $dir/slack.html -w3_browse_url "file://$dir/slack.html" -[ "$SURFRAW_print" = "yes" ] && echo "POST data: $postdata" -rm -rf $dir |