1 files changed, 70 insertions, 0 deletions
diff --git a/src/atariserver_slip.sh b/src/atariserver_slip.sh
new file mode 100755
index 0000000..42b37cd
--- /dev/null
+++ b/src/atariserver_slip.sh
@@ -0,0 +1,70 @@
+#!/bin/sh
+
+# This script is for use with the uIP test programs and AtariSIO.
+# Before running this, run "make disk" to create the disk image.
+# This script needs to be run with root privileges (e.g. with sudo)
+
+# Configurable stuff:
+
+ATR_IMAGE=${1-fujichat.atr}
+
+#ATR_IMAGE=fujitest.atr # Name of the disk image
+TTY=/dev/ttyS0         # serial port to use
+BAUD=4800              # must match compiled-in value in rs232dev.c
+SLATTACH=a8_slattach   # slattach binary (possibly patched)
+SLIP_IFACE=sl0         # probably no need to change this
+LOCAL_IP=192.168.0.1   # SLIP IP address for Linux host
+REMOTE_IP=192.168.0.2  # SLIP IP address for Atari host
+IP_FORWARD=yes         # Route packets for the Atari?
+IP_MASQUERADE=yes      # NAT for the Atari?
+MASQ_IFACE=ra0         # if NATing, our main (LAM or internet) interface
+DUMP_PACKETS=yes       # Run tcpdump on sl0 interface?
+
+# DELAY is needed on some (most?) systems because e.g. atariserver tries
+# to run before the atarisio module is fully initialized. Choose one:
+
+# No delay:
+#DELAY="true"
+
+# 1 second:
+#DELAY="sleep 1"
+
+# 1/4 second (may not work on old Linux installs):
+DELAY="usleep 250000"
+
+# End of config section, start of code:
+
+ifconfig $SLIP_IFACE down 2&>/dev/null
+killall $SLATTACH 2&>/dev/null
+fuser -k $TTY 2&>/dev/null # make sure nobody's using the port...
+$DELAY
+fuser -k -9 $TTY 2&>/dev/null # Just in case...
+$DELAY
+modprobe atarisio port=$TTY
+$DELAY
+atariserver $ATR_IMAGE
+#atariserver autorun.sys # fails when run from MyPicoDOS, why?
+$DELAY
+rmmod atarisio
+$DELAY
+echo "Starting SLIP on $SLIP_IFACE, local $LOCAL_IP, remote $REMOTE_IP"
+$SLATTACH -L -p slip -s $BAUD $TTY &
+$DELAY
+ifconfig $SLIP_IFACE $LOCAL_IP mtu 576
+ifconfig $SLIP_IFACE $LOCAL_IP pointopoint $REMOTE_IP
+
+if [ "$IP_MASQUERADE" = "yes" ]; then
+	echo "IP Masquerading enabled"
+	iptables -F
+	iptables -t nat -F
+	iptables -t nat -A POSTROUTING -o $MASQ_IFACE -j MASQUERADE
+fi
+
+if [ "$IP_FORWARD" = "yes" ]; then
+	echo "IP Forwarding enabled"
+	echo "1" > /proc/sys/net/ipv4/ip_forward
+fi
+
+if [ "$DUMP_PACKETS" = "yes" ]; then
+	tcpdump -i $SLIP_IFACE -X -n -vvv -s 0
+fi