path: root/src/col80_modified/cruft/dasm2atasm

#!/usr/bin/perl -w

=head1 NAME

dasm2atasm - converts 6502 assembly in DASM syntax to ATASM (or MAC/65) format.

=head1 SYNOPSIS

	dasm2atasm mycode.asm

Writes output to I<mycode.m65>

	dasm2atasm stuff.asm other.m65

Reads from I<stuff.asm>, writes to I<other.m65>

=head1 DESCRIPTION

B<dasm2atasm> tries its best to convert DASM's syntax into something
that B<ATASM> can use. Since B<ATASM>'s syntax is 99% compatible with
that of B<MAC/65>, B<dasm2atasm> can be used for that as well.

=head1 CAVEATS

There are a few B<DASM> directives that aren't quite supported by
B<ATASM>.

=over 4

=item echo

In B<DASM> syntax, I<echo> can interpolate values, like so:

	echo $100-*, " bytes of zero page left"

B<ATASM>'s closest equivalent to I<echo> is I<.warn>, but it doesn't
allow multiple arguments or interpolation. For now, B<dasm2atasm> just
comments out the line with the I<echo> directive.

=item seg and seg.u

B<ATASM> just plain doesn't support segments. These directives will
just be commented out. This I<shouldn't> have any effect on the
object code.

=item sta.w, sty.w, stx.w 

B<ATASM> doesn't provide a way to force word addressing, when the operand
of a store instruction will allow zero page addressing to be used. You'll
run into this a lot in Atari 2600 code, or any other 6502 code that has to
maintain sync with an external piece of hardware (using word addressing
causes the 6502 to use an extra CPU cycle, which is the only way to cause
a 1-cycle delay).

For now, we're just converting any I<st?.w> instructions to the appropriate
I<.byte> directives, like so:

	;;;;; dasm2atasm: was `sta.w COLUPF', using .byte to generate opcode
	.byte $8d, COLUPF, $00

This works fine if I<COLUPF> is a zero-page label. It's possible, though
unlikely, that you'll run across code where the programmer has used I<sta.w>
with a label that would already cause absolute word addressing to be used,
in which case the extra I<$00> will break our code (literally: I<$00> is
the I<BRK> instruction!)

This isn't likely to be fixed by I<dasm2atasm>. The correct fix will be to
support I<sta.w> and friends in B<ATASM> itself, which may happen in the
future.

=item . (dot)

B<DASM> allows the use of I<.> or I<*> to represent the current program counter
in expressions. B<ATASM> only allows I<*>, and unless I want to include a
full expression-parser in B<dasm2atasm>, I can't reliably translate this.

For now, you'll have to fix this yourself. Future versions will at least
make an attempt, but this one doesn't.

=back

=head1 AUTHOR

B. Watson I<< <urchlay@urchlay.com> >>. Comments & constructive criticism
welcome, or just a friendly `hello'. Spam will be redirected to /dev/null
and so will the spammer's entire domain.

=cut

sub usage {
	print <<EOF;
Usage: $0 -[aclmr] infile.asm [outfile.m65]

EOF
	exit 1;
}

sub get_mac_sub {
	my $rex = shift;
	my $code = "sub { s/($rex)/\\U\$1/gio };";
	#warn "code is $code";
	return eval "$code";
}

sub unhex {
	# makes a proper $xx, $xx, $xx list of bytes
	# from a list of hex digits, spaces optional.
	my $bytes = shift;
	my $ret   = "";

	$bytes =~ s/\s//g;

	#warn "unhex: bytes is $bytes";

	for($bytes =~ /(..)/g) {
		#warn "unhex: found $_";
		$ret .= "\$$_, ";
	}

	chop $ret;
	chop $ret;

	return $ret;
}

sub fix_include {
	my $inc = shift;
	my $old = $inc;
	$inc =~ s/\.(\w+)("?)$/.m65$2/;

	if($recursive) {
		system("$cmd $old $inc");
	} else {
		warn "Don't forget to convert included file `$old' to .m65 format!\n";
	}
	return $inc;
}

sub do_subs {
	# Do the dirty work of the substitutions. Only reason we have this
	# as a subroutine of its own is for profiling purposes (and we do
	# spend a *lot* of time here!)
	my $line = shift;

	for($line) {
		s/^(\@?\w+):/$1/;      # no colons after labels, in atasm
		s/%/~/g;               # binary constant
		s/!=/<>/g;             # inequality

		s/^(\s+)\.?echo(.*)/;;;;;$1.warn$2/i     &&
			do { warn "$in, line $.:\n\t`.warn' not fully compatible with dasm's `echo', commented out\n" }
												 && next;

		# This is supposed to change e.g. `bpl .label' to `bpl @label'
		s/^(\s+)([a-z]{3})(\s+)\.(\w+)/$1$2$3\@$4/i
													&& next;


		s/{(\d)}/%$1/g;        # macro arg (gotta do this *after* bin. constants!)

# atasm doesn't support shifts, emulate with multiply/divide
		s/\s*<<\s*(\d+)/"*" . 2**$1/eg;
		s/\s*>>\s*(\d+)/"\/" . 2**$1/eg;

# atasm chokes sometimes when there's whitespace around an operator
#  unfortunately, a construct like `bne *-1' can't afford to lose the
#  space before the *... why, oh why, does * have to be both multiply and
#  program counter? *sigh*

#		s/\s*([-!|\/+*&])\s*/$1/g;

# ARGH. Why does dasm allow `byte #1, #2, #3'... and why do people *use* it?!
  s/^(\s+)\.?byte(\s+)/$1.byte$2/i && do { s/#//g } && next;
  s/^(\s+)\.?word(\s+)/$1.word$2/i && do { s/#//g } && next;
  s/^(\s+)\.?dc\.w(\s+)/$1.word$2/i     && do { s/#//g } && next;
  s/^(\s+)\.?dc(?:\.b)?(\s+)/$1.byte$2/i     && do { s/#//g } && next;

# 20070529 bkw: turn ".DS foo" into ".DC foo 0"
  s/^(\s+)\.?ds(\s+)(\S+)/$1.dc $3 0 /i     && do { s/#//g } && next;

# I really want to add `hex' to atasm. 'til then though, fake with .byte
		s/^(\s+)\.?hex\s+(.*)/$1 . '.byte ' .
			unhex($2)/ie                && next;

		s/^(\s+)\.?subroutine(.*)/$1.local$2/i && next;
		s/^(\s+)\.?include(\s+)(.*)/$1 . '.include' . $2 . fix_include($3)/gie
												 && next;
		s/^(\s+)\.?equ\b/$1=/i       && next;
		s/^(\s+)\.?repeat\b/$1.rept/i       && next;
		s/^(\s+)\.?repend\b/$1.endr/i       && next;
		s/^(\s+)\.?endm\b/$1.endm/i         && next;
		s/^(\s+)\.?org(\s+)([^,]*).*$/$1*=$2$3/i             && next;
		s/^(\s+)\.?incbin\b/$1\.incbin/i    && next;
		s/^(\s+)\.?err(.*)/$1.error$2/i     && next; # TODO: see if atasm allows `.error' with no message.
		s/^(\s+)\.?ifconst\s+(.*)/$1.if .def $2/i
														&& next; # TODO: test this!
		s/^(\s+)\.?else/$1.else/i           && next;
		s/^(\s+)\.?endif/$1.endif/i         && next;
		s/^(\s+)\.?if\s+(.*)/$1.if $2/i     && next;

		# stuff that doesn't work:
		s/^(\s+)(\.?seg(\..)?\s.*)/;;;;; dasm2atasm: `seg' not supported by atasm\n;;;;;$1$2/i
												 && next;
		s/^(\s+)(\.?processor\s.*)/;;;;; dasm2atasm: `processor' not supported by atasm\n;;;;;$1$2/i
												 && next;

		s/^(\s+)sta\.w(\s+)(.*)/;;;;; dasm2atasm: was `sta.w $3', using .byte to generate opcode\n$1.byte \$8d, <$3, >$3/i
												 && next;

		s/^(\s+)stx\.w(\s+)(.*)/;;;;; dasm2atasm: was `stx.w $3', using .byte to generate opcode\n$1.byte \$8e, <$3, >$3/i
												 && next;

		s/^(\s+)sta\.w(\s+)(.*)/;;;;; dasm2atasm: was `sty.w $3', using .byte to generate opcode\n$1.byte \$8c, <$3, >$3/i
												 && next;

		# atasm lacks `align', so make up for it with a macro
		if(s/(\s)\.?align(\s+)(.*)/$1ALIGN$2$3/i) {
			if(!$align_defined) { # only gotta define it if not already defined.
				for($align_macro) {
					$_ =~ s/^/($linenum += 10) . " "/gme if $linenum;
					$_ =~ s/\n/\x9b/g if $a8eol;
				}

				print OUT $align_macro; # no, I wouldn't use these globals in a CS class assignment.
				$align_defined++;
			}
			next;
		}

		# macros. This is by far the biggest pain in the ass yet.
		s/(\s)\.?mac\b/$1.macro/i;
		if(/(\s)\.macro(\s+)(\w+)/) {
			$mac_regex .= "|\\b$3\\b";
			$mac_sub = get_mac_sub($mac_regex);
		}

		if(ref $mac_sub) { # if we've found at least one macro so far...
			&$mac_sub;      # CAPITALIZE everything matching a macro name
		}  # note: this code assumes macros are *always* defined before they're
         # used. atasm requires this, but does dasm?

	}
	return $line;
}

## main() ##

$ca65 = 0;
$a8eol = 0;
$linenum = 0;
$recursive = 0;

$cmd = $0;

while($ARGV[0] =~ /^-/i) {
	my $opt = shift;
	$cmd .= " $opt";

	if($opt eq "-c") {
		$ca65++;
	} elsif($opt eq "-a") {
		$a8eol++;
	} elsif($opt eq "-l") {
		$linenum = 1000;
	} elsif($opt eq "-m") {
		$a8eol++;
		$linenum = 1000;
	} elsif($opt eq "-r") {
		$recursive++;
	} elsif($opt eq "--") {
		last;
	} else {
		warn "Unknown option '$opt'\n";
		usage;
	}
}

if($ca65 && ($linenum || $a8eol)) {
	die "Can't use line numbers and/or Atari EOLs with ca65 output\n";
}

$align_macro = <<EOF;
;;;;;; ALIGN macro defined by dasm2atasm
 .macro ALIGN
 *= [[*/%1]+1] * %1
 .endm
EOF

$align_defined = 0; # we only need to emit the macro definition once.

$in  = shift || usage;
$out = shift;

($out = $in) =~ s/(\.\w+)?$/.m65/ unless $out;

die "$0: can't use $in for both input and output\n" if $out eq $in;

open IN,  "<$in"  or die      "Can't read $in: $!\n";
open OUT, ">$out" or die "Can't write to $out: $!\n";

$hdr = <<EOF;
;;; Converted from DASM syntax with command:
;   $cmd $in $out

EOF

for($hdr) {
	$_ =~ s/^/($linenum += 10) . " "/gme if $linenum;
	$_ =~ s/\n/\x9b/g if $a8eol;
}

print OUT $hdr;

if($ca65) {
	print OUT <<EOF;
;;; ca65 features enabled by dasm2atasm
;   To build with ca65:
;     ca65 -o foo.o -t none foo.asm
;     ld65 -o foo.bin -t none foo.o
.FEATURE pc_assignment
.FEATURE labels_without_colons

EOF
}

$mac_regex = "!THIS_ISNT_SUPPOSED_TO_MATCH";
$mac_sub   = ""; # this will be the code ref we call to match $mac_regex

while(<IN>) {
	chomp;
	s/\r//; # you might not want this on dos/win, not sure if it matters.
	$label = "";

	if(/^(\w+)\s*=\s*\1/i) {
		print OUT ";;;;; dasm2atasm: labels are case-insensitive in atasm\n";
		$line = ";;;;; $_ ; This assignment is an error in atasm";
		next;
	}

# do this before we split out the label:
	s/^\./\@/;             # local label (dot in dasm, @ in atasm)

	if(s/^([^:;\s]*):?(\s+)/$2/) {
		$label = $1;
	}

	($line, $comment) = split /;/, $_, 2;
	next unless $line;
	
	$line = do_subs($line);

} continue {
	if($linenum) {
		print OUT "$linenum ";
		$linenum += 10;
	}

	print OUT $label if $label;
	print OUT $line if $line;
	print OUT ";$comment" if $comment;
	print OUT ($a8eol ? "\x9b" : "\n");
}