path: root/console.s

 .include "atari.inc"
 .export _clrtobot, _clrtoeol, _clr_screen, _clrtoline, _cspaces, _cblank, _backspace, _cprint_pipe, _cprint_bang, _cspace, _cputc_s, _comma_space, _cprint_colon_space, _cprint_question_space, _cprint_period, _cprint_taipan_prompt, _crlf, _plus_or_space, _gotox0y, _cputc0, _set_orders
 .export _rvs_on, _rvs_off

 .import mul40        ; from cc65's runtime
 .importzp tmp3       ; ditto
 .import _revflag     ; conio/revers.s
 .import bump_destptr ; these two are
 .importzp destptr    ; from draw_lorcha.s
 .importzp sreg
 .import _cprintulong, _cputc, _cprint_taipan, _timed_getch, _orders

 .ifdef CART_TARGET
  .segment "HIGHCODE"
 .else
  .code
 .endif


; void clr_screen(void);
; void clrtobot(void);
; void clrtoeol(void);
; void clrtoline(unsigned char line);

; this stuff doesn't disturb conio's (and the OS's) idea of the
; current cursor position. It's *way* faster than writing them in
; C in terms of cclear() (which uses one cputc() call per blank).

_clr_screen: ; same as gotoxy(0,0); clrtobot();
 lda #0
 sta ROWCRS
 sta COLCRS

_clrtobot: ; same as clrtoline(24);
 lda #24
 ;bne _clrtoline ; we'd have had to do this if ROWCRS weren't zero-page.
 .byte $2c ; see bit trick explanation below, if you don't recognize this.

_clrtoeol:
 lda ROWCRS
 ; fall through to _clrtoline

_clrtoline:
 sta tmp3 ; stash our arg

 ;lda #0
 ;sta OLDCHR ; stop conio from redrawing stuff after we clear it,
             ; no longer needed with our custom conio.

 ; setup destptr to start of current line, NOT
 ; current cursor position.
 lda ROWCRS
 jsr mul40  ; AX = A*40 (addr of start-of-row)
 clc
 adc SAVMSC ; add AX to screen pointer
 sta destptr
 txa
 adc SAVMSC+1
 sta destptr+1

 ; X = current row, Y = current column. Stop clearing a line when Y == 40,
 ; we're done when X == 24. Apologies, the names X and Y are backwards
 ; compared to proper Cartesian coordinates.
 ldx ROWCRS
 ldy COLCRS
 lda #0

clrloop:
 sta (destptr),y ; blank a character (A == 0, screen code for a space)
 iny
 cpy #40
 bne clrloop
 ldy #0
 inx
 cpx tmp3
 bcs done

 jsr bump_destptr
 lda #0
 tay
 beq clrloop

done:
 rts

_cspaces:
 sta tmp3
@lp:
 jsr _cspace
 dec tmp3
 bne @lp
 rts

_backspace:
 dec COLCRS
 lda #1
 ; fall through to _cblank

_cblank:
 tax
 lda COLCRS
 pha
 lda ROWCRS
 pha
 txa
 jsr _cspaces
 pla
 sta ROWCRS
 pla
 sta COLCRS
 rts

_rvs_on:
 lda #$80
 .byte $2c ; BIT absolute opcode
_rvs_off:
 lda #0
 sta _revflag
 rts

 ; micro-optimizations here.
 ; the stuff below might be a bit hard to follow, but it saves code.
 ; calling this: cputs("? ");
 ; emits code like this:
 ;  lda #<Lxxx
 ;  ldx #>Lxxx
 ;  jsr _cputs
 ; ...which is 9 bytes per call (plus 3 bytes for the "? " string itself).
 ; replacing each cputs("? "); with cprint_question_space() means 3 bytes
 ; per call (a JSR). there are 3 'some char followed by a space' routines
 ; here, totalling 10 bytes. the actual space is printed by code shared
 ; with cspace().
 ; also, there are 5 'print a single character' routines. each one would
 ; normally be cputc('X'), which compiles to:
 ;  lda #'X'
 ;  jsr _cputc
 ; ...or 5 bytes each. we have 5 of them, so 25 bytes. using fall-thru
 ; and the BIT trick, they condense down to 17 bytes.
 ; if you're not familiar with the "BIT trick" to skip a 2-byte instruction,
 ; the stuff below looks like gibberish... here's a mini-tutorial:

 ;store1:
 ; lda #1
 ; .byte $2c ; this is the opcode for BIT absolute
 ;store2:
 ; lda #2
 ; sta $0600
 ; rts

 ; if entered via "jsr store1", the above code fragment executes these
 ; instructions:
 ; lda #1
 ; bit $02A9 ; $A9 is the LDA immediate opcode, 02 is the #2
 ; sta $0600
 ; rts

 ; if entered via "jsr store2", it's
 ; lda #2
 ; sta $0600
 ; rts

 ; the "bit $02a9' doesn't affect any registers other than the flags,
 ; and the "sta $0600 : rts" part doesn't depend on any of the flags,
 ; so the BIT is effectively a no-op that "masks" the 2-byte LDA #2
 ; instruction "hidden" as its operand.

 ; ", Taipan? "
 ; using fall-thru here saves 3 bytes (normally the last instruction
 ; would be "jmp _cprint_question_space")
_cprint_taipan_prompt:
 jsr _comma_space
 jsr _cprint_taipan
 ; fall thru

 ; each entry point here prints one character followed by a space
 ; "? "
_cprint_question_space:
 lda #'?'
 .byte $2c

 ; ": "
_cprint_colon_space:
 lda #':'
 .byte $2c

 ; ", "
_comma_space:
 lda #','
 jsr _cputc
 ; fall thru

 ; each entry point here prints one character
_cspace:
 lda #' '
 .byte $2c
_cputc0:
 lda #'0'
 .byte $2c
_cprint_pipe:
 lda #'|'
 .byte $2c
_cputc_s:
 lda #'s'
 .byte $2c
_cprint_period:
 lda #'.'
 .byte $2c
_cprint_bang:
 lda #'!'
 .byte $2c
_crlf:
 lda #$9b
 jmp _cputc

; extern void plus_or_space(unsigned char b);
_plus_or_space:
 tax
 beq @spc
 lda #'+' + 128 ; inverse plus
 .byte $2c
@spc:
 lda #' '
 ldx #39
 stx COLCRS
 ldx #15
 stx ROWCRS
 jmp _cputc

; extern void gotox0y(char y);
 _gotox0y:
 sta ROWCRS
 lda #0
 sta COLCRS
 rts

; extern void set_orders(void);
;_set_orders:
; jsr _timed_getch
; ldx _orders
; cmp #'f'
; bne @notf
; ldx #1
;@notf:
; cmp #'r'
; bne @notr
; ldx #2
;@notr:
; cmp #'t'
; bne @nott
; ldx #3
;@nott:
; stx _orders
; rts

; extern void set_orders(void);
_set_orders:
 jsr _timed_getch
 ldx #3
@solp:
 cmp orders_tbl-1,x
 beq @returnx
 dex
 bne @solp
 rts
@returnx:
 stx _orders
 rts

 .rodata
orders_tbl: .byte "frt"